/*=========================================================================

  Program:   Visualization Toolkit
  Module:    vtkPlaneSource.h

  Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
  All rights reserved.
  See Copyright.txt or http://www.kitware.com/Copyright.htm for details.

     This software is distributed WITHOUT ANY WARRANTY; without even
     the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
     PURPOSE.  See the above copyright notice for more information.

=========================================================================*/
/**
 * @class   vtkPlaneSource
 * @brief   create an array of quadrilaterals located in a plane
 *
 * vtkPlaneSource creates an m x n array of quadrilaterals arranged as
 * a regular tiling in a plane. The plane is defined by specifying an
 * origin point, and then two other points that, together with the
 * origin, define two axes for the plane. These axes do not have to be
 * orthogonal - so you can create a parallelogram. (The axes must not
 * be parallel.) The resolution of the plane (i.e., number of subdivisions) is
 * controlled by the ivars XResolution and YResolution.
 *
 * By default, the plane is centered at the origin and perpendicular to the
 * z-axis, with width and height of length 1 and resolutions set to 1.
 *
 * There are three convenience methods that allow you to easily move the
 * plane.  The first, SetNormal(), allows you to specify the plane
 * normal. The effect of this method is to rotate the plane around the center
 * of the plane, aligning the plane normal with the specified normal. The
 * rotation is about the axis defined by the cross product of the current
 * normal with the new normal. The second, SetCenter(), translates the center
 * of the plane to the specified center point. The third method, Push(),
 * allows you to translate the plane along the plane normal by the distance
 * specified. (Negative Push values translate the plane in the negative
 * normal direction.)  Note that the SetNormal(), SetCenter() and Push()
 * methods modify the Origin, Point1, and/or Point2 instance variables.
 *
 * @warning
 * The normal to the plane will point in the direction of the cross product
 * of the first axis (Origin->Point1) with the second (Origin->Point2). This
 * also affects the normals to the generated polygons.
*/

#ifndef vtkPlaneSource_h
#define vtkPlaneSource_h

#include "vtkFiltersSourcesModule.h" // For export macro
#include "vtkPolyDataAlgorithm.h"

class VTKFILTERSSOURCES_EXPORT vtkPlaneSource : public vtkPolyDataAlgorithm
{
public:
  void PrintSelf(ostream& os, vtkIndent indent) VTK_OVERRIDE;
  vtkTypeMacro(vtkPlaneSource,vtkPolyDataAlgorithm);

  /**
   * Construct plane perpendicular to z-axis, resolution 1x1, width
   * and height 1.0, and centered at the origin.
   */
  static vtkPlaneSource *New();

  //@{
  /**
   * Specify the resolution of the plane along the first axes.
   */
  vtkSetMacro(XResolution,int);
  vtkGetMacro(XResolution,int);
  //@}

  //@{
  /**
   * Specify the resolution of the plane along the second axes.
   */
  vtkSetMacro(YResolution,int);
  vtkGetMacro(YResolution,int);
  //@}

  //@{
  /**
   * Set the number of x-y subdivisions in the plane.
   */
  void SetResolution(const int xR, const int yR);
  void GetResolution(int& xR,int& yR) {
    xR=this->XResolution; yR=this->YResolution;};
  //@}

  //@{
  /**
   * Specify a point defining the origin of the plane.
   */
  vtkSetVector3Macro(Origin,double);
  vtkGetVectorMacro(Origin,double,3);
  //@}

  //@{
  /**
   * Specify a point defining the first axis of the plane.
   */
  void SetPoint1(double x, double y, double z);
  void SetPoint1(double pnt[3]);
  vtkGetVectorMacro(Point1,double,3);
  //@}

  //@{
  /**
   * Specify a point defining the second axis of the plane.
   */
  void SetPoint2(double x, double y, double z);
  void SetPoint2(double pnt[3]);
  vtkGetVectorMacro(Point2,double,3);
  //@}

  //@{
  /**
   * Set/Get the center of the plane. Works in conjunction with the plane
   * normal to position the plane. Don't use this method to define the plane.
   * Instead, use it to move the plane to a new center point.
   */
  void SetCenter(double x, double y, double z);
  void SetCenter(double center[3]);
  vtkGetVectorMacro(Center,double,3);
  //@}

  //@{
  /**
   * Set/Get the plane normal. Works in conjunction with the plane center to
   * orient the plane. Don't use this method to define the plane. Instead, use
   * it to rotate the plane around the current center point.
   */
  void SetNormal(double nx, double ny, double nz);
  void SetNormal(double n[3]);
  vtkGetVectorMacro(Normal,double,3);
  //@}

  /**
   * Translate the plane in the direction of the normal by the
   * distance specified.  Negative values move the plane in the
   * opposite direction.
   */
  void Push(double distance);

  //@{
  /**
   * Set/get the desired precision for the output points.
   * vtkAlgorithm::SINGLE_PRECISION - Output single-precision floating point.
   * vtkAlgorithm::DOUBLE_PRECISION - Output double-precision floating point.
   */
  vtkSetMacro(OutputPointsPrecision,int);
  vtkGetMacro(OutputPointsPrecision,int);
  //@}

protected:
  vtkPlaneSource();
  ~vtkPlaneSource() VTK_OVERRIDE {}

  int RequestData(vtkInformation *, vtkInformationVector **, vtkInformationVector *) VTK_OVERRIDE;

  int XResolution;
  int YResolution;
  double Origin[3];
  double Point1[3];
  double Point2[3];
  double Normal[3];
  double Center[3];
  int OutputPointsPrecision;

  int UpdatePlane(double v1[3], double v2[3]);
private:
  vtkPlaneSource(const vtkPlaneSource&) VTK_DELETE_FUNCTION;
  void operator=(const vtkPlaneSource&) VTK_DELETE_FUNCTION;
};

#endif