#include "zxLogInstance.h"
#include "ZxBaHelper.h"
#include <QDebug>
#include "ZxResolutionHelper.h"
#include "zxSysUtils.h"
#include "ZxPtyDock.h"
#include "iDockBaseWx.h"
#include "ZxMainWindow.h"
#include "ZxTabWidget.h"

#include "ZxSubAxisX.h"
#include "ZxSubAxisY.h"

#include "ZxPlot.h"
#include "ZxObjCurve.h"
#include "ZxSubTitle.h"
#include "tCurvePlotScene.h"
#include "tCurvePlotView.h"

#include "ZxTableView.h"
#include "ZxTableModel.h"

#include "mModuleDefines.h"

#include "ZxDataWell.h"
#include "ZxDataProject.h"
#ifdef QT_DEBUG
#include "ZxDataGaugeP.h"
#endif

#ifdef QT_DEBUG
#include "nmXmlHelper.h"
#endif

#include "nmGuiPlot.h"
#include "nmPlotGraphicBinder.h"
#include "nmSubWndMain.h"
#include "nmPlotDialogContext.h"
#include "nmPlotDialogContextProvider.h"

#include "nmWxGridVTKContainerWidget.h"
#include "nmWxSelectWellsDlg.h"
#include "nmWxSelectWellsWidget.h"
#include "nmWxParameterProperty.h"
#include "nmCalculationDllPebiSolverTask.h"
#include "nmCalculationUtils.h"

#include "nmObjPointWell.h"

#include "nmDataAnalyzeManager.h"
#include "nmDataDemo.h"
#include "nmDataLogFile.h"
#include "nmDataMeasure.h"

#include "nmWxParaProperty.h"
#include "nmWxRCDialog.h"
#include "nmWxWellLayerDlg.h"
#include "nmWxGeometryLayerDlg.h"
#include "nmReservoirPropertiesDataSource.h"
#include "nmWxReservoirPropertiesEditor.h"
#include "nmWxPropertyInterpolationDlg.h"
#include "nmWxPostprocessingAnimationWidget.h"
#include "nmWxGeoRefDlg.h"

#include "iSubWndFitting.h"
#include "iAnalRun.h"

#include <QVector>
#include <QSet>
#include <QHash>
#include <QPushButton>

#include "nmSingalCenter.h"

#include "nmWxParaPropertyPebi.h"
#include "nmWxNumericalDesign.h"

#include "nmWxReservoirProperties.h"


#include "nmCalculationPebiGrid.h"
#include "nmDataOutline.h"
#include "nmDataVerticalFracturedWell.h"
#include "nmDataHorizontalFracturedWell.h"
#include "nmDataVerticalWell.h"
#include "ZxDataGaugeP.h"
#include "ZxDataGaugeF.h"

#include "nmWxDFN.h"
#include "nmWxDisplaySettings.h"
#include "ZxRstWnd.h"

#include <QPointer>

namespace
{
// 保留原来求解器单例的防重入语义：全局同一时间只允许一个DLL求解任务运行。
// QPointer会在QObject销毁后自动变空，避免保留已经释放的线程指针。
QPointer<nmCalculationDllPebiSolverTask> s_pRunningSolverTask;
QPointer<nmSubWndMain> s_pPendingSolverWindow;
}

nmSubWndMain::nmSubWndMain(QWidget *parent, QString sExt) :
    iSubWndBaseFit(parent, sExt)
{
    m_pWxPlot = NULL;
    m_pWxDockParas = NULL;
    m_pWxParas = NULL;
    m_pWxDockData1 = NULL;
    m_pTableView1 = NULL;
    m_pWxDockData2 = NULL;
    m_pTableView2 = NULL;
#ifdef QT_DEBUG
    m_pWxDockTemp = NULL;
    m_pListWxTemp = NULL;
#endif

    // 为了后续支持多井提供方便
    if(m_pDataWell == NULL) {
        m_pDataWell = zxCurWell;
    }

    //m_sMdiWndType = s_MdiType_DataNum;
    m_sMdiWndType = s_MdiType_DataAnal;
    setWindowTitle(tr("nmSubWndMain"));

    m_lockState =  false; // 默认为false
    m_openDialogCmdIds.clear();
    m_pProgressDlg = nullptr;
    m_pSolverTask = nullptr;
    m_pSolverDataManager = nullptr;
    m_pSolverFitting = nullptr;
    m_pPendingResultDataManager = nullptr;
    m_pPendingResultFitting = nullptr;
    m_bPendingResultWidgetRefresh = false;
    m_bPendingResultCompletionMessage = false;
    m_bPendingResultWindowReady = false;
    m_nPendingResultPebiCount = -1;
    m_nPendingResultSolveTimeMs = -1;
    m_bSolverResultCompletionPending = false;
    m_bPendingSolverSucceeded = false;
    m_bPendingSolverInputChanged = false;
    m_nPendingSolverPebiCount = -1;
    m_nPendingSolverTimeMs = -1;
    m_bSolverStartPending = false;
    m_bSolverCancelRequested = false;
    m_pPlotToolBar = nullptr;
}

nmSubWndMain::~nmSubWndMain()
{
    if(m_pWxPlot != nullptr) {
        // Map窗口析构时，解除DataManager中保存的Plot引用，避免后续访问已释放画布。
        foreach(nmDataAnalyzeManager* pManager, nmDataAnalyzeManager::s_mapDataAnalManager.values()) {
            if(pManager != nullptr && pManager->getPlot() == m_pWxPlot) {
                pManager->setPlot(nullptr);
            }
        }
    }

#ifdef QT_DEBUG

    // 坚持谁创建谁析构原则，删除（首先需要去除绑定）
    if(NULL != m_pWxDockTemp) {
        //QObject* pParent = m_pWxDockTemp->parent();
        //ZxMainWindow* p = dynamic_cast<ZxMainWindow*>(pParent);
        ZxMainWindow* p = m_pMainWindow;

        if(NULL != p) {
            p->detachOuterDockWx(m_pWxDockTemp);
        }

        delete m_pWxDockTemp;
        m_pWxDockTemp = NULL;
    }

#endif
    this->setTopDocksVisible(true);

    // TODO：删除已有在图元的数据对象
    //if (m_pWxPlot != nullptr) {
    //	QVector<nmObjBase*> vecObjs = m_pWxPlot->getAllPlots();
    //	foreach(nmObjBase* obj, vecObjs) {
    //		obj->removeData();
    //	}
    //}


    m_bSolverStartPending = false;
    disconnectPebiGridGenerationWait();
    if(s_pPendingSolverWindow == this) {
        s_pPendingSolverWindow = nullptr;
    }

	if (m_pProgressDlg) {
		delete m_pProgressDlg;
		m_pProgressDlg = NULL;
	}

	if (m_pSolverTask) {
		// 第一步：停止向正在析构的窗口投递完成回调。
		disconnect(m_pSolverTask, SIGNAL(sig_calculateDone(bool)), this, SLOT(on_solverTaskFinished(bool)));
		m_pSolverTask->requestCancel();
		// 第二步：DataManager 会在成果窗口销毁后释放，而任务仍读取该对象。
		// Qt 4.8 下 DLL 执行中只能等待其正常返回，绝不能强杀持锁线程。
		if(m_pSolverTask->isRunning()) {
			m_pSolverTask->wait();
		}
		if (m_pSolverTask == s_pRunningSolverTask) {
			s_pRunningSolverTask = nullptr;
		}
		// 第三步：线程已经停止，当前窗口仍是任务的明确所有者，可直接释放。
		delete m_pSolverTask;
		m_pSolverTask = nullptr;
	}

    /*if (m_parameterPropertyWindow != nullptr) {
    	delete m_parameterPropertyWindow;
    	m_parameterPropertyWindow = nullptr;
    }*/
}

void nmSubWndMain::configWnd(QString sPrevInfo)
{
    iSubWndBaseFit::configWnd(sPrevInfo);

    if(NULL != m_pMainWindow) {
        disconnect(this, SIGNAL(sigAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)), \
                   m_pMainWindow, SLOT(slotAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)));
        connect(this, SIGNAL(sigAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)), \
                m_pMainWindow, SLOT(slotAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)));
    }

    initUI();
}

void nmSubWndMain::initUI()
{
    //    iSubWndBaseAF::initUI();
#ifdef QT_DEBUG
    // 示例：演示增加Dock并且追加至程序主窗口
    initUiTop();
#endif
    // 主布局：定义
    initUiMain();
    // 外围布局，DockWx
    {
        initUiDockWxs();
        initUiDockPtys();
    }


#ifdef QT_DEBUG

    // 示例：如何加载xml文件
    if(_nmXmlHelper->loadXmlDefines()) {
        foreach(nmXmlData* pData, *(_nmXmlHelper->getVecNmXmlDataPtrs())) {
            Q_ASSERT(NULL != pData);
            qDebug() << QString("%1: %2").arg(pData->m_sName).arg(pData->m_sAlias);
        }
    }

#endif
}

QWidget* nmSubWndMain::initUiMainWx()
{
    QSplitter* pSplitter = new QSplitter(Qt::Vertical);
    Q_ASSERT(NULL != pSplitter);
    nmGuiPlot* pWxPlot = new nmGuiPlot();
    m_pWxPlot = pWxPlot;

	// 将绘图对象添加到数据中心
	nmDataAnalyzeManager::getCurrentInstance()->setPlot(m_pWxPlot);

    {
        // 建立信号，以便在此处增加新的工具
        connect(pWxPlot, SIGNAL(sigToolbarBuilt(QToolBar*)),
                this, SLOT(slotToolbarBuilt(QToolBar*)));
        QSize sz = QSize(265, 203);
        pWxPlot->initUI("TestGui", sz);
        bindChartSignals(pWxPlot);
        pSplitter->addWidget(pWxPlot);
    }

    return pSplitter;
}

void nmSubWndMain::initUiDockWxs()
{
    // TODO，本Dock的操作
    // 基础参数Dock
    //    {
    //        m_pWxDockParas = new iDockBaseWx(tr("Parameters"));
    //        Q_ASSERT (NULL != m_pWxDockParas);
    //        addDockWidget(Qt::LeftDockWidgetArea, m_pWxDockParas);
    //        m_pWxParas = new nmWxParaProperty();
    //        Q_ASSERT (NULL != m_pWxParas);
    //        m_pWxParas->initUI();
    //        m_pWxDockParas->setWidget(m_pWxParas);
    //        m_pWxDockParas->setMinimumWidth(_resoSizeW(200));
    //    }
    // 表格数据Dock
    //    {
    //        QStringList listTitles;
    //        listTitles << tr("Name1");
    //        iDockBaseWx* pDockWx1 = new iDockBaseWx(tr("Data1"));
    //        Q_ASSERT (NULL != pDockWx1);
    //        {
    //            addDockWidget(Qt::RightDockWidgetArea, pDockWx1);
    //            m_pWxDockData1 = pDockWx1;
    //            ZxTableView* pTableView = new ZxTableView();
    //            Q_ASSERT (NULL != pTableView);
    //            {
    //                ZxTableModel* pTableModel = new ZxTableModel(1, 1, listTitles);
    //                Q_ASSERT (NULL != pTableModel);
    //                pTableView->setModel(pTableModel);
    //                pTableView->setMenuMode(ZxTableView::MTM_Edit_Without_Col);
    //                pTableView->setSelectionBehavior(ZxTableView::SelectRows);
    //                pTableView->fuzzyUiOfQt5();
    //            }
    //            pDockWx1->setWidget(pTableView);
    //            m_pTableView1 = pTableView;
    //        }
    //        iDockBaseWx* pDockWx2 = new iDockBaseWx(tr("Data2"));
    //        Q_ASSERT (NULL != pDockWx2);
    //        {
    //            addDockWidget(Qt::RightDockWidgetArea, pDockWx2);
    //            tabifyDockWidget(pDockWx1, pDockWx2);
    //            m_pWxDockData2 = pDockWx2;
    //            ZxTableView* pTableView = new ZxTableView();
    //            Q_ASSERT (NULL != pTableView);
    //            {
    //                ZxTableModel* pTableModel = new ZxTableModel(1, 1, listTitles);
    //                Q_ASSERT (NULL != pTableModel);
    //                pTableView->setModel(pTableModel);
    //                pTableView->setMenuMode(ZxTableView::MTM_Readonly);
    //                pTableView->fuzzyUiOfQt5();
    //            }
    //            pDockWx2->setWidget(pTableView);
    //            m_pTableView2 = pTableView;
    //        }
    //    }
}

void nmSubWndMain::initUiDockPtys()
{
    iSubWndBaseAF::initUiDockPtys();
    // 属性Dock
    {
        Q_ASSERT(NULL != m_pDockPty);
        m_pDockPty->setMinimumWidth(_resoSizeW(200));
    }
}

#ifdef QT_DEBUG
// 示例：演示增加Dock并且追加至程序主窗口
void nmSubWndMain::initUiTop()
{
#if 0
    return;
    // 隐藏所有Dock
    this->setTopDocksVisible(false);
    // 创建新的Dock
    iDockBaseWx* pDockWx = new iDockBaseWx(tr("TODO:Demo"));
    Q_ASSERT(NULL != pDockWx);
    //    QListWidget* pListWx = new QListWidget();
    nmWxTreeWidget* treeWidget = new nmWxTreeWidget(pDockWx, m_pAnalyzeData);
    Q_ASSERT(NULL != treeWidget);
    pDockWx->setWidget(treeWidget);
    //    m_pListWxTemp = pListWx;
    pDockWx->setMinimumWidth(_resoSizeW(200));
    emit sigAppendDock2Main(pDockWx, Qt::LeftDockWidgetArea);
    m_pWxDockTemp = pDockWx;
    return;
    // 基础参数Dock
    //    {
    //        iDockBaseWx* pDockWx = new iDockBaseWx(tr("TODO:Demo"));
    //        Q_ASSERT (NULL != pDockWx);
    //        QListWidget* pListWx = new QListWidget();
    //        Q_ASSERT (NULL != pListWx);
    //        pDockWx->setWidget(pListWx);
    //        m_pListWxTemp = pListWx;
    //        pDockWx->setMinimumWidth(_resoSizeW(200));
    //        emit sigAppendDock2Main(pDockWx, Qt::LeftDockWidgetArea);
    //        m_pWxDockTemp = pDockWx;
    //    }
#endif
}

#endif

void nmSubWndMain::bindChartSignals(iGuiPlot* pWxPlot)
{
    nmGuiPlot* p = dynamic_cast<nmGuiPlot*>(pWxPlot);

    if(NULL != p) {
        connect(p, SIGNAL(sigObjSelChanged(ZxObjBase*, bool)), \
                this, SLOT(slotObjSelChanged(ZxObjBase*, bool)));
        connect(p, SIGNAL(sigObjPtsChanged(ZxObjBase*)),
                this, SLOT(slotObjPtsChanged(ZxObjBase*)));
    }

    iSubWndBaseAF::bindChartSignals(pWxPlot);
}

bool nmSubWndMain::runActionOf(QString sAction)
{
    if(iSubWnd::runActionOf(sAction)) {
        return true;
    }

    // 数据加载
    QString s = sAction;

    if(_isSame(s, "LoadP")) {
        return true;
    }

    return false;
}

bool nmSubWndMain::runCmdBy(QString sName, QString sID)
{
    QString s = sName;
    int nId = sID.toInt();

    // 运行菜单之前，先将所有处于选中状态的图元状态恢复
    if(m_pWxPlot != nullptr) {
        m_pWxPlot->clearPlotsSelectStates();
    }

    switch(nId) {
        case 5102:
            this->geologicalMapImport();
            return true;

        /*case 5103:
            this->geologicalMapHide();
            return true;*/

        case 5120:
            this->drawMeasuringScale();
            return true;

        case 5103:
            this->drawPolygonOutline();
            return true;

        case 5104:
            this->drawSquareOutline();
            return true;

        case 5105:
            this->drawRoundOutline();
            return true;

        case 5106:
            this->drawFault();
            return true;

        case 5107:
            this->selectWell();
            return true;

        // 新建井菜单暂时停用。
        // case 5108:
        //     this->drawWell();
        //     return true;

        case 5109:
            this->drawCrack();
            return true;

        case 5110:
            this->drawRegion();
            return true;

        case 5111:
            this->drawRegionMark();
            return true;

        case 5112:
            this->geoLayering();
            return true;

        case 5113:
            this->reservoirCharacteristics();
            return true;

        /*case 5114:
            this->generationMesh();
            return true;
        */
        case 5115:
            this->solveAndAnalyze();
            return true;

        case 5117:
            this->mergeAnaResultToFitting();
            this->schedulePendingResultWidgets();
            return true;

        case 5121:
            this->deleteOneObj();
            return true;

        case 5119:
            this->setLocked();
            return true;

        case 5122:
            this->generateDFN();
            return true;

        case 5123:
            this->displaySetting();
            return true;

        case 5124:
            return m_pWxPlot != nullptr &&
                   m_pWxPlot->runAction("print_Preview");

        case 5125:
            return m_pWxPlot != nullptr &&
                   m_pWxPlot->runAction("Print");

        /*
        case 5117:
            this->initData();
            return true;
            */
        case 5129:
            if(isDialogCmdOpened(5129)) {
                return true;
            }
            this->drawMeasure();
            return true;

        case 5127:
            this->drawGeoRef();
            return true;

        case 5128:
            if(isDialogCmdOpened(5128)) {
                return true;
            }
            this->drawPointerPos();
            return true;

        case 5126:
            if(isDialogCmdOpened(5126)) {
                return true;
            }
            this->showPropertyInterpolationDialog();
            return true;
    }

    if(_isSame(s, "RunGrid")) {
        if(NULL != m_pWxPlot) {
            //m_pWxPlot->refreshGrid(true);
        }

        return true;
    }

    return false;
}

bool nmSubWndMain::checkCmdEnable(bool &b, \
                                  QString sName, int nID, \
                                  bool bLicensed)
{
    bool b1 = (NULL != zxCurProject);
    bool b2 = (NULL != m_pDataWell);

    // 判断当前锁定状态
    if(m_lockState) {
        /*
        if(nID >= 5102 && nID <= 5125) {
            b = (b1 && b2 && bLicensed && !isReadonly() && NULL != m_pWxPlot);
            return true;
        }
        */
        /*
        if ((nID >= 5122 && nID <= 5125)  || (nID >= 5112 && nID <= 5119 ))
        {
            b = true;
            return true;
        }
        */
        /*
        if(nID >= 5102 && nID <= 5124) {
            b = true;
            return true;
        }
        */
        // 可使用菜单栏
        if(sName == "NmMap" || sName == "NmUnlocked" || sName == "NmGeometry" ||
                sName == "NmProperties" || sName == "NmDFN" || sName == "NmCaculation" ||
                sName == "NmBack" || sName == "NmResult" ||  sName == "NmGrid" ||
                sName == "NmInterpolation" ||
                sName == "NmShow" || sName == "NmPrintPreview" ||  sName == "NmPrint" ||
                sName == "VisibleAnalBasic" || sName == "VisibleAnalPVT" ||  sName == "VisibleAnalDiff" ||
                sName == "VisibleAnalPseu" || sName == "nmFitModel" || sName == "NmAnalChange") {
            b = true;
            return true;
        } else {
            b = false;
            return false;
        }

    } else {
        if((nID >= 5102 && nID <= 5130) /*|| (nID >= 9002 && nID <= 9003) */ || (nID >= 9101 && nID <= 9104) || nID == 3104) {
            b = (b1 && b2 && bLicensed && !isReadonly() && NULL != m_pWxPlot);
            return true;
        }
    }

    return iSubWndBaseFit::checkCmdEnable(b, sName, nID, bLicensed);
}

void nmSubWndMain::reAdjustToolbar(QToolBar* pToolBar)
{
    iSubWndBaseAF::reAdjustToolbar(pToolBar);
    m_pPlotToolBar = pToolBar;
    // 获取所有动作的列表
    //    QList<QAction *> actions = m_pPlotToolBar->actions();
    //    // 隐藏第1个和第2个动作
    //    if (actions.size() > 0) {
    //        actions[0]->setVisible(false); // 隐藏第1个动作
    //    }
    //    if (actions.size() > 1) {
    //        actions[1]->setVisible(false); // 隐藏第2个动作
    //    }
}

void nmSubWndMain::firstLoadAndUpdate()
{
    iSubWndBaseAF::firstLoadAndUpdate();
}

void nmSubWndMain::finalDeals()
{
    iSubWndBaseAF::finalDeals();
#ifdef QT_DEBUG
    updatePlots();
    updateDockWxs();

    if(m_pWxDockData1 != NULL) {
        Q_ASSERT(NULL != m_pWxDockData1);
        m_pWxDockData1->raise();
    }

#endif
}

void nmSubWndMain::onActivated()
{
#ifdef QT_DEBUG

    // 当前窗体激活时，可以做些事情，比如把隐藏的Dock显示出来
    if(NULL != m_pWxDockTemp) {
        if(!m_pWxDockTemp->isVisible()) {
            m_pWxDockTemp->setVisible(true);
        }
    }

#endif
}

#ifdef QT_DEBUG

void nmSubWndMain::updatePlots()
{
#if 0
    // 里面根据曲线，重新刷了一下坐标轴范围。你屏蔽该函数，即可
    // 坐标轴范围会变成背景图的大小
    return ;
    // 说明：以从当前井获取一条压力数据进行绘图为例
    QString sType = iDataModelType::sTypeDataGaugeP;
    QString sCodeP = ""; //如果已知压力数据Code，可以直接引用
    ZxDataGaugeP* pDataObjP = dynamic_cast<ZxDataGaugeP*>(getDataObjOf(sType, sCodeP));

    if(NULL == pDataObjP) {
        qDebug() << tr("Failed to get data of type '%1'").arg(sType);
        return;
    }

    VecDouble vecX, vecY;
    QByteArray ba = pDataObjP->getGaugeDataOf(0);

    if(!ZxBaHelper::convertBa2VecXY(vecX, vecY, ba)) {
        qDebug() << tr("Failed to get x-y data of dataobj '%1'").arg(pDataObjP->getCode());
        return;
    }

    nmGuiPlot* pWxPlot = m_pWxPlot;
    Q_ASSERT(NULL != pWxPlot);
    QString sName = tr("CurveName");
    ZxObjBase* pObj = pWxPlot->updatePlotObjBy(sName, vecX, vecY, true);

    if(NULL != pObj) {
        pObj->setLockPos(true); //可以调整属性
        //        pObj->setReadOnly(true);
        pWxPlot->freshAxisScales(true);//刷新坐标轴刻度
        // 设置标题+坐标轴等
        pWxPlot->setAxisX(tr("Time"), "hr");
        pWxPlot->setAxisY(tr("Pressure"), "MPa");
        pWxPlot->setAxisXYLog(false, 0);
        pWxPlot->setAxisXYLog(false, 1);
        pWxPlot->m_pPlot->setLegendVisible(false);
        pWxPlot->m_pPlot->getTitle()->setName(tr("Demo"));
    }
#endif
}

ZxDataObject* nmSubWndMain::getDataObjOf(QString sType, QString sCode /*= ""*/)
{
    ZxDataWell* pDataWell = zxCurWell;
    Q_ASSERT(NULL != pDataWell);
    ZxDataObject* pDataObj = NULL;

    if(!sCode.isEmpty()) {
        pDataObj = pDataWell->getChild(sType, sCode);
    } else {
        ZxDataObjectList vecObjs = pDataWell->getChildren(sType);

        if(!vecObjs.isEmpty()) {
            pDataObj = vecObjs[0];
        }
    }

    return pDataObj;
}

void nmSubWndMain::updateDockWxs()
{
#if 0
    // TODO，刷新Dock内容
    return;
    // 左侧参数窗体
    Q_ASSERT(NULL != m_pWxParas);
    QStringList listParas;
    listParas << "K" << "S" << "rw" << "Miuo" << "Bo" << "phi";
    m_pWxParas->refreshUIs(listParas);
    // 表格数据1
    Q_ASSERT(NULL != m_pTableView1);
    ZxTableModel* pTableModel = m_pTableView1->getModel();
    Q_ASSERT(NULL != pTableModel);
    QStringList listTitles;
    listTitles << tr("Col1") << tr("Col2\n(MPa)");
    VVecDouble vvec;
    {
        VecDouble vec;
        vec << 0.2 << 3.4;
        vvec << vec;
    }

    {
        VecDouble vec;
        vec << 5.6 << 0.456;
        vvec << vec;
    }

    pTableModel->setTitles(listTitles);
    pTableModel->setData(vvec);

    if(NULL != m_pListWxTemp) {
        m_pListWxTemp->clear();

        for(int i = 0; i < 10; i++) {
            QString sItem = tr("Demo Item %1").arg(i + 1);
            QListWidgetItem* pItem = new QListWidgetItem(sItem);
            Q_ASSERT(NULL != pItem);
            pItem->setIcon(zxLoadIcon("Open"));
            m_pListWxTemp->addItem(pItem);
        }
    }
#endif
}

void nmSubWndMain::updateTableByCurve(ZxObjCurve* pObjCurve, ZxTableView* pTableView)
{
    Q_ASSERT(NULL != pObjCurve);
    Q_ASSERT(NULL != pTableView);
    // 刷新表格标题
    {
        QString sNameX = pObjCurve->getAxisX()->getName();
        QString sUnit = pObjCurve->getAxisX()->getUnit();

        if(!sUnit.isEmpty()) {
            sNameX += QString("\n(%1)").arg(sUnit);
        }

        QString sNameY = pObjCurve->getAxisY()->getName();
        sUnit = pObjCurve->getAxisY()->getUnit();

        if(!sUnit.isEmpty()) {
            sNameY += QString("\n(%1)").arg(sUnit);
        }

        QStringList listTitles;
        listTitles << sNameX << sNameY;
        pTableView->getModel()->setTitles(listTitles);
    }

    // 刷新表格数据
    {
        VVecDouble vvec;
        QVector<QPointF> vecValues = pObjCurve->getAllValues();

        for(int i = 0; i < vecValues.count(); i++) {
            VecDouble vec;
            vec << vecValues.at(i).x() * 1.0;
            vec << vecValues.at(i).y() * 1.0;
            vvec << vec;
        }

        pTableView->getModel()->setData(vvec);
    }
}

#endif

void nmSubWndMain::slotObjSelChanged(ZxObjBase* p, bool b)
{
#ifdef QT_DEBUG
    // 如果选中了一条曲线，则把其数据显示在数据表格2中
    ZxObjCurve* pObjCurve = dynamic_cast<ZxObjCurve*>(p);

    if(NULL != pObjCurve && b) {
        Q_ASSERT(NULL != m_pWxDockData2);
        m_pWxDockData2->raise();
        updateTableByCurve(pObjCurve, m_pTableView2);
    }

#endif
}

void nmSubWndMain::slotObjPtsChanged(ZxObjBase* p)
{
}

void nmSubWndMain::onSerialize(ZxSerializer* ser)
{
    iSubWndBaseAF::onSerialize(ser);

    if(NULL != m_pWxPlot) {
        m_pWxPlot->setModified(false);
    }
}

void nmSubWndMain::onDeserialize(ZxSerializer* ser)
{
    iSubWndBaseAF::onDeserialize(ser);

    if(NULL != m_pWxPlot) {
        m_pWxPlot->setModified(false);
    }
}

void nmSubWndMain::onDeserialized()
{
    if(NULL != m_pWxPlot) {
        m_pWxPlot->resetAfterDeserialized();
    }
}

//bool nmSubWndMain::loadRss() {
//    ZxRstJobWnd* pRstWnd = getRstJobWnd();
//    Q_ASSERT(NULL != pRstWnd);
//    // 基础信息
//    {
//        QByteArray v = pRstWnd->getDataInfo();
//        IxSerDes* pSerObj = this;

//        if(!loadRstInfoFromArr(v, pSerObj)) {
//            return false;
//        }
//    }

//    // 图形
//    if(NULL != m_pWxPlot) {
//        QByteArray v = pRstWnd->getDataInfo1();
//        ZxPlot* pPlot = NULL;
//        loadOnePlot(pPlot, v);

//        if(NULL != pPlot) {
//            m_pWxPlot->m_pPlotScene->freshToPlot(pPlot,
//                                                 m_pWxPlot->m_pPlotView);
//            m_pWxPlot->m_pPlot = m_pWxPlot->m_pPlotScene->m_pPlot;
//            pPlot->resetTools(m_pWxPlot->m_pPlotView);
//            m_pWxPlot->resetAfterDeserialized();
//        }

//        m_pWxPlot->runUpdate();
//    }

//    return true;
//}

//bool nmSubWndMain::saveRss() {
//    ZxRstJobWnd* pRstWnd = getRstJobWnd();

//    if(NULL == pRstWnd) {
//        return false;
//    }

//    // 基础信息
//    {
//        QByteArray v;
//        IxSerDes* pSerObj = this;

//        if(!saveRstInfoToArr(v, pSerObj)) {
//            return false;
//        }

//        pRstWnd->setDataInfo(v);
//    }

//    // 图形
//    if(NULL != m_pWxPlot) {
//        ZxPlot* pPlot = m_pWxPlot->m_pPlot;
//        {
//            QByteArray v1;

//            if(saveOnePlot(pPlot, v1)) {
//                pRstWnd->setDataInfo1(v1);
//            }
//        }
//    }

//    return pRstWnd->save();
//}

bool nmSubWndMain::loadRsts()
{
    return true;//

    /*
    ZxRstWnd* pRstWnd = getRstUtilWnd();
    Q_ASSERT (nullptr != pRstWnd);

    // 基础信息
    if (!loadRstBase(pRstWnd))
    {
        return false;
    }

    // 图形
    if (nullptr != m_pWxPlot)
    {
        QByteArray v = QByteArray();
        pRstWnd->loadSubPlotContent(v);
        ZxPlot* pPlot = nullptr;
        loadOnePlotFromBa(pPlot, v);
        if (nullptr != pPlot)
        {
            m_pWxPlot->m_pPlotScene->freshToPlot(pPlot,
                                                 m_pWxPlot->m_pPlotView);
            m_pWxPlot->m_pPlot = m_pWxPlot->m_pPlotScene->m_pPlot;
            pPlot->resetTools(m_pWxPlot->m_pPlotView);
            m_pWxPlot->resetAfterDeserialized();
        }
        m_pWxPlot->runUpdate();
    }//*/
}

bool nmSubWndMain::saveRsts()
{
    ZxRstWnd* pRstWnd = this->getRstUtilWnd();

    if(nullptr == pRstWnd) {
        return false;
    }

    return pRstWnd->save();

    //    // 基础信息
    //    if (!saveRstBase(pRstWnd))
    //    {
    //        return false;
    //    }

    //    // 图形
    //    if (nullptr != m_pWxPlot)
    //    {
    //        ZxPlot* pPlot = m_pWxPlot->m_pPlot;
    //        {
    //            QByteArray v1;
    //            if (saveOnePlotToBa(pPlot, v1))
    //            {
    //                pRstWnd->saveSubPlotContent(v1);
    //            }
    //        }
    //    }

    //return pRstWnd->save();
}

bool nmSubWndMain::slotSaveAll()
{
    ZxRstWnd* pRstWnd = getRstUtilWnd();
    Q_ASSERT(NULL != pRstWnd);
    if(pRstWnd == NULL) {
        return false;
    }
    return saveRsts();
}

void nmSubWndMain::updateSelectedWells(QList<ZxDataWell *> wellObjList)
{
//     if(wellObjList.count() == 0) {
//         return;
//     }

	// setp 1，获取现在画布上所有井的 ZxDataWell* 数据指针
	QVector<nmObjPointWell*> pWellPlotList = m_pWxPlot->getWellPlots();

	// QMap<ZxDataWell*, nmObjPointWell*> 用于快速查找和构建当前画布上的井数据列表
	QMap<ZxDataWell*, nmObjPointWell*> pWellDataToPlotMap;

	for(int i = 0; i < pWellPlotList.count(); ++i) {
		nmObjPointWell* wellPlot = pWellPlotList[i];
		ZxDataWell *pWellData = wellPlot->getWellData();
		if (pWellData) { // 确保数据不为空
			pWellDataToPlotMap.insert(pWellData, wellPlot);
		}
	}

	// 用集合保存当前井和选中井，避免井数增加后反复调用 QList::contains 造成平方级查找。
	QList<ZxDataWell*> pWellPlotDataList = pWellDataToPlotMap.keys();
	QSet<ZxDataWell*> pWellPlotDataSet;
	for(int i = 0; i < pWellPlotDataList.count(); ++i) {
		pWellPlotDataSet.insert(pWellPlotDataList[i]);
	}
	QSet<ZxDataWell*> selectedWellDataSet;
	for(int i = 0; i < wellObjList.count(); ++i) {
		if(wellObjList[i] != nullptr) {
			selectedWellDataSet.insert(wellObjList[i]);
		}
	}

	// setp 2，找出需要 REMOVE (删除) 的图元
	QVector<nmObjPointWell*> vDeleteWellPlotList;

	// 遍历所有当前在画布上的井数据
	for(int i = 0; i < pWellPlotDataList.count(); ++i) {
		ZxDataWell *pWellDataOnPlot = pWellPlotDataList[i];
		// 如果该井数据不在用户选中的列表 wellObjList 中，则需要删除
		if (!selectedWellDataSet.contains(pWellDataOnPlot)) {
			// 从 Map 中获取对应的图元对象
			vDeleteWellPlotList.append(pWellDataToPlotMap.value(pWellDataOnPlot));
		}
	}

	// setp 3，找出需要 ADD (添加) 的井数据
	QVector<ZxDataWell*> vAddWellPlotList;

	// 遍历所有用户选中的井数据 wellObjList
	for(int i = 0; i < wellObjList.count(); ++i) {
		ZxDataWell *pWellDataSelected = wellObjList[i];
		// 确保井数据有效
		if (pWellDataSelected && !pWellPlotDataSet.contains(pWellDataSelected)) {
			// 如果该井数据不在当前画布上的数据列表中，则需要添加
			vAddWellPlotList.append(pWellDataSelected);
		}
	}

	// 单井增删过程中会多次请求重绘；批量阶段先暂停，全部处理完成后再统一刷新。
	const bool updatesEnabled = m_pWxPlot->updatesEnabled();
	m_pWxPlot->setUpdatesEnabled(false);

	// setp 4，执行删除操作
	for(int i = 0; i < vDeleteWellPlotList.count(); ++i) {
		nmObjPointWell* pWellPlot = vDeleteWellPlotList[i];
		// 如果是当前井，不可删除 (保留您的逻辑)
		if(m_pWxPlot->graphicBinder() && m_pWxPlot->graphicBinder()->isCurrentWellGraphic(pWellPlot))
			continue;

		// 删除对应的参数类
		pWellPlot->removeData();

		// 实际从画布上删除图元
		m_pWxPlot->m_pPlot->removeObjByName(pWellPlot->getName());
	}

    // setp 5，将vAddWellPlotList中的井数据，构建图元，添加到画布上
    for(int i = 0; i < vAddWellPlotList.count(); i++) {
        ZxDataWell* wellObj = vAddWellPlotList[i];
        QString sName = wellObj->getName();
        QVector<QPointF> points;
        points.append(QPointF(wellObj->getLocationX(), wellObj->getLocationY()));
        // 构建了图元

        nmObjPointWell* pWellPlot = NULL;
        pWellPlot = (nmObjPointWell*)m_pWxPlot->appendOneObj(NMOT_Point_Well, sName, points);
        if(pWellPlot == NULL) {
            continue;
        }
        // 选择已有井重新生成图元时，先恢复Binder，后续afterCreated才能建立井数据绑定
        if(m_pWxPlot->graphicBinder()) {
            pWellPlot->setGraphicBinder(m_pWxPlot->graphicBinder());
        }
        // 设置图元的井数据
        pWellPlot->setWellData(wellObj);
        // 移动到正确的位置
        pWellPlot->moveToPos(pWellPlot->getPosOf(pWellPlot->getAllPos()));

        pWellPlot->afterCreated(); //选择完后初始化参数
    }


    // 添加完毕后，重新渲染
    m_pWxPlot->setUpdatesEnabled(updatesEnabled);
    if(updatesEnabled) {
        m_pWxPlot->update();
    }
}

// 地质图导入
void nmSubWndMain::geologicalMapImport()
{
    //打开图片选择弹框
    //打开文件对话框选择图片文件
    //QString filePath = QFileDialog::getOpenFileName(nullptr, "选择图片文件", "", "Images (*.png *.xpm *.jpg)");

    //if(!filePath.isEmpty()) {
    //    // 画布 设置背景，并自适应宽高
    //    ZxPlot* pPlot = m_pWxPlot->m_pPlot;
    //    pPlot->setBkImgFile(filePath);
    //    //        QImage* pBkImg = pPlot->getBkImg();
    //    //        Q_ASSERT (NULL != pBkImg);
    //    //        int w = pBkImg->width();
    //    //        int h = pBkImg->height();
    //    //        pPlot->getMainAxisX()->setRangeMinMax(0, w, true);
    //    //        pPlot->getMainAxisY()->setRangeMinMax(0, h, true);
    //    nmDataLogFile::getInstance()->writeLog(filePath);
    //}

    QString sFilter =
        "PNG Images (*.png);;"
        "JPEG Images (*.jpg *.jpeg);;"
        "Bitmap Images (*.bmp);;"
        "All Files (*)";

    QString sFile = QFileDialog::getOpenFileName(
                        nullptr,
                        tr("Open File"),
                        ZxBaseUtil::getLastDir(),
                        sFilter
                    );

    if(sFile.isEmpty() || !QFile::exists(sFile)) {
        return;
    }

    // 更新最后访问目录
    QFileInfo fi(sFile);
    ZxBaseUtil::setLastDir(fi.absolutePath());

    // 输出文件失败原因
    QImageReader reader(sFile);

    if(!reader.canRead()) {
        // 输出具体错误
        qDebug() << "Error Message: " << reader.errorString();
        return;
    }

    if(m_pWxPlot == nullptr || m_pWxPlot->m_pPlot == nullptr) {
        return;
    }

    // 设置背景图片
    ZxPlot* pPlot = m_pWxPlot->m_pPlot;
    pPlot->setBkImgFile(sFile);

    // 检查 ZxPlot 是否成功加载图片
    QImage* pBkImg = pPlot->getBkImg();
    Q_ASSERT(nullptr != pBkImg);
    if(pBkImg == nullptr) {
        return;
    }

    // 将图片信息存储到数据中心
    nmDataAnalyzeManager* pManager = nmDataAnalyzeManager::getCurrentInstance();

    if(pManager) {
        QImage loadedImage = reader.read(); // 假设已经读取成功
        BackgroundImageInfo bgInfo;
        bgInfo.bIsVisible = true; // 默认设置为可见
        bgInfo.sFilePath = sFile; // 当前背景文件路径
        bgInfo.objImage = loadedImage; // 存储QImage对象
        pManager->setBackgroundImageInfo(bgInfo); // 设置背景图片信息
    }

    // 手动调整坐标轴（如果 ZxPlot 未自动调整）
    //int w = pBkImg->width();
    //int h = pBkImg->height();
    //if (w > 0 && h > 0) {
    //	pPlot->getMainAxisX()->setRangeMinMax(0, w, true);
    //	pPlot->getMainAxisY()->setRangeMinMax(0, h, true);
    //}
}

void nmSubWndMain::drawMeasuringScale()
{
    this->triggerToolBarAction(NMOT_Line_MeasuringScale);
}

void nmSubWndMain::geologicalMapHide()
{
}

void nmSubWndMain::setTopDocksVisible(bool visible)
{
    // 获取主程序所有 Dock 视图
    QList<QDockWidget*> dockWidgets = m_pMainWindow->findChildren<QDockWidget*>();

    // 遍历所有 Dock 视图并移除位于左侧的
    foreach(QDockWidget* dock, dockWidgets) {
        if(visible) {
            dock->show();
        } else {
            dock->hide();
        }
    }
}

void nmSubWndMain::drawPolygonOutline()
{
    // 获取多边形边界的绘制，并模拟触发点击操作
    // 目前多边形边界绘制是工具栏的第4个，所以用 3
    //    QList<QAction *> actions = m_pPlotToolBar->actions();
    //    if (!actions.isEmpty()) {
    //        QAction *action = actions[3];
    //        action->trigger();
    //    }
    this->triggerToolBarAction(NMOT_PolygonOutline);
}

void nmSubWndMain::drawSquareOutline()
{
    // 获取矩形边界的绘制，并模拟触发点击操作
    this->triggerToolBarAction(NMOT_RectOutline);
}

void nmSubWndMain::drawRoundOutline()
{
    // 获取矩形边界的绘制，并模拟触发点击操作
    this->triggerToolBarAction(NMOT_RoundOutline);
}

void nmSubWndMain::drawFault()
{
    this->triggerToolBarAction(NMOT_Line_Fault);
}

void nmSubWndMain::selectWell()
{
    if(m_pWxPlot == nullptr || zxCurProject == nullptr) {
        return;
    }

	// 第一步：Map 当前选择状态使用 WellCode 保存，井名只用于界面显示。
	QList<QVariant> selectedWellCodes;
	QVector<ZxDataWell*> vecMapWells = m_pWxPlot->getWellDatas();
	for(int nIndex = 0; nIndex < vecMapWells.size(); ++nIndex) {
		ZxDataWell* pMapWell = vecMapWells[nIndex];
		if(pMapWell != nullptr && !pMapWell->getCode().isEmpty()) {
			selectedWellCodes.append(pMapWell->getCode());
		}
	}

	// 第二步：读取项目井库，并建立 WellCode 到项目井对象的稳定映射。
	int wellCount = zxCurProject->getChildrenCount(iDataModelType::sTypeWell);
	ZxDataObjectList wellList = zxCurProject->getChildren(iDataModelType::sTypeWell);
	nmDataLogFile::getInstance()->writeLog(QString(" %1 %2").arg(wellCount).arg(wellList.size()));
	QStringList listWellNames;
	QList<QVariant> wellCodes;
	QMap<QString, ZxDataWell*> wellCodeToObjMap;
	for(int i = 0; i < wellList.size(); i++) {
		ZxDataWell* wellObj = dynamic_cast<ZxDataWell*>(wellList[i]);
		if(wellObj == nullptr || wellObj->getCode().isEmpty()) {
			continue;
		}
		nmDataLogFile::getInstance()->writeLog(wellObj->getName() + " " + wellObj->getCode());
		listWellNames.append(wellObj->getName());
		wellCodes.append(wellObj->getCode());
		wellCodeToObjMap.insert(wellObj->getCode(), wellObj);
	}

	// 第三步：恢复 Map 中已有井的勾选状态，允许用户增删其他项目井。
	nmWxSelectWellsDlg dlg;
	nmWxSelectWellsWidget wellListWidget;
	wellListWidget.setSelectedValues(selectedWellCodes);
	wellListWidget.addItems(listWellNames, wellCodes);
	dlg.setWidget(&wellListWidget);
	if(dlg.exec() == QDialog::Accepted) {
		nmDataLogFile::getInstance()->writeLog(" OK ");
		QList<QVariant> selectedValues = wellListWidget.getSelectedValues();
		QList<ZxDataWell*> selectWellList;

		// 第四步：按 WellCode 解析选择结果，避免同名井或井名修改导致关联错误。
		QStringList selectedCodeTexts;
		for(int i = 0; i < selectedValues.count(); i++) {
			const QString sWellCode = selectedValues[i].toString();
			ZxDataWell* pSelectedWell = wellCodeToObjMap.value(sWellCode, nullptr);
			if(pSelectedWell != nullptr) {
				selectWellList.append(pSelectedWell);
				selectedCodeTexts.append(sWellCode);
			}
		}

		this->updateSelectedWells(selectWellList);
		nmDataLogFile::getInstance()->writeLog(
				"===" + selectedCodeTexts.join(";") + "===");
	} else {
		nmDataLogFile::getInstance()->writeLog(" Cancel ");
	}
}

// 新建井菜单暂时停用。
// void nmSubWndMain::drawWell()
// {
//     this->triggerToolBarAction(NMOT_Point_Well);
//     nmDataLogFile::getInstance()->writeLog(" in drawWell ");
// }

void nmSubWndMain::drawCrack()
{
    this->triggerToolBarAction(NMOT_Line_Fracture);
}

void nmSubWndMain::drawRegion()
{
    this->triggerToolBarAction(NMOT_Region);
}

void nmSubWndMain::drawRegionMark()
{
    this->triggerToolBarAction(NMOT_RegionMark);
}

void nmSubWndMain::drawMeasure()
{
    nmGuiPlot* plot = dynamic_cast<nmGuiPlot*>(m_pWxPlot);
    QWidget* measureDlg = showMeasureDialog();

    if(plot == nullptr || measureDlg == nullptr) {
        return;
    }

    bindMeasureDialog(measureDlg);
    plot->setAllPlotObjectsEditable(false);
    this->triggerToolBarAction(NMOT_Line_Measure);
}

void nmSubWndMain::drawGeoRef()
{
    nmWxGeoRefDlg dlg(nullptr);
    dlg.exec();
}

void nmSubWndMain::drawPointerPos()
{
    nmGuiPlot* plot = dynamic_cast<nmGuiPlot*>(m_pWxPlot);

    if(plot) {
        showPointerPosDialog();
    }
}

bool nmSubWndMain::isDialogCmdOpened(int nId) const
{
    return m_openDialogCmdIds.contains(nId);
}

void nmSubWndMain::markDialogCmdOpened(int nId)
{
    if(!m_openDialogCmdIds.contains(nId)) {
        m_openDialogCmdIds.append(nId);
    }
}

void nmSubWndMain::markDialogCmdClosed(int nId)
{
	// 从后向前遍历，避免索引错乱
	for (int i = m_openDialogCmdIds.size() - 1; i >= 0; --i) {
		if (m_openDialogCmdIds[i] == nId) {
			m_openDialogCmdIds.remove(i);
		}
	}
}

void nmSubWndMain::onDialogCmdDestroyed(QObject* obj)
{
    if(obj == nullptr) {
        return;
    }

    bool bOk = false;
    int nId = obj->property("dialogCmdId").toInt(&bOk);

    if(bOk) {
        markDialogCmdClosed(nId);
    }
}

void nmSubWndMain::bindDialogCmdDestroyed(QWidget* dialog, int nId)
{
    if(dialog == nullptr) {
        return;
    }

    dialog->setProperty("dialogCmdId", nId);
    connect(dialog, SIGNAL(destroyed(QObject*)), this, SLOT(onDialogCmdDestroyed(QObject*)));
}

void nmSubWndMain::bindMeasureDialog(QWidget* measureDlg)
{
    nmGuiPlot* plot = dynamic_cast<nmGuiPlot*>(m_pWxPlot);

    if(plot == nullptr || measureDlg == nullptr) {
        return;
    }

    disconnect(plot, SIGNAL(sigMeasureStarted()), measureDlg, SLOT(resetButtons()));
    connect(plot, SIGNAL(sigMeasureStarted()), measureDlg, SLOT(resetButtons()));

    disconnect(measureDlg, SIGNAL(needDeleteMeasureObj()), plot, SLOT(finishMeasure()));
    connect(measureDlg, SIGNAL(needDeleteMeasureObj()), plot, SLOT(finishMeasure()));
}

QWidget* nmSubWndMain::showMeasureDialog()
{
	nmGuiPlot* plot = dynamic_cast<nmGuiPlot*>(m_pWxPlot);

	if(plot == nullptr) {
		return nullptr;
	}

    nmPlotDialogContextProvider* pDialogProvider = nmPlotDialogContext::provider();

    if(pDialogProvider == nullptr) {
        return nullptr;
    }
	
    QWidget* measureDlg = pDialogProvider->createMeasureDialog(plot);

    if(measureDlg == nullptr) {
        return nullptr;
    }

    markDialogCmdOpened(5129);
    measureDlg->setObjectName("nmMeasureDialog");
    measureDlg->setAttribute(Qt::WA_DeleteOnClose, true);
    bindDialogCmdDestroyed(measureDlg, 5129);
    nmDataMeasure* measureData = nmDataAnalyzeManager::getCurrentInstance()->getMeasureData();
    if(measureData != nullptr) {
        connect(measureData, SIGNAL(sigMeasureDataChanged()), measureDlg, SLOT(updateDisplay()));
    }
    measureDlg->show();
	return measureDlg;
}

QWidget* nmSubWndMain::showPointerPosDialog()
{
    nmGuiPlot* plot = dynamic_cast<nmGuiPlot*>(m_pWxPlot);

    if(plot == nullptr) {
        return nullptr;
    }

    nmPlotDialogContextProvider* pDialogProvider = nmPlotDialogContext::provider();

    if(pDialogProvider == nullptr) {
        return nullptr;
    }

    QWidget* pointerPosDlg = pDialogProvider->createPointerPosDialog(plot);

    if(pointerPosDlg == nullptr) {
        return nullptr;
    }

    markDialogCmdOpened(5128);
    pointerPosDlg->setObjectName("nmPointerPosDialog");
    pointerPosDlg->setAttribute(Qt::WA_DeleteOnClose, true);
    bindDialogCmdDestroyed(pointerPosDlg, 5128);
    plot->bindPointerPosDialog(pointerPosDlg);
    pointerPosDlg->show();
    return pointerPosDlg;
}

QWidget* nmSubWndMain::showPropertyInterpolationDialog()
{
    nmWxPropertyInterpolationDlg* interpolationDlg = new nmWxPropertyInterpolationDlg(
                m_pWxPlot, nmDataAnalyzeManager::getCurrentInstance(), this);
    markDialogCmdOpened(5126);
    interpolationDlg->setObjectName("nmPropertyInterpolationDialog");
    // 关闭窗口时自动释放，并恢复菜单命令的可用状态
    interpolationDlg->setAttribute(Qt::WA_DeleteOnClose, true);
    bindDialogCmdDestroyed(interpolationDlg, 5126);
    interpolationDlg->show();
    interpolationDlg->raise();
    interpolationDlg->activateWindow();
    return interpolationDlg;
}

void nmSubWndMain::generationMesh()
{
    //    // TODO，还不支持原型边界
    //    // 拿到多边形和点的位置信息
    //    QVector<ZxObjBase*> pObjVec = m_pWxPlot->getObjsByTag("nObjPolygonOutline");
    //    nmDataLogFile::getInstance()->writeLog(" ---------- " + QString::number(pObjVec.count()));
    //    QVector<ZxObjBase*> pWellObjVec = m_pWxPlot->getObjsByTag("nObjPointWell");
    //    nmDataLogFile::getInstance()->writeLog(" ---------- " + QString::number(pWellObjVec.count()));

    //    // 生成geo文件
    //    // 调用gmsh生成vtk文件
    //    // 弹出网格的dialog，渲染文件
    //    if(true) {
    //        QDialog* dlg = new QDialog;
    //        QVBoxLayout* layout = new QVBoxLayout;
    //        dlg->setLayout(layout);
    //        nmWxGridVTKContainerWidget* gridVTKContainerWidget = new nmWxGridVTKContainerWidget(dlg);
    //        layout->addWidget(gridVTKContainerWidget);
    //        dlg->resize(800, 600);
    //        dlg->show();
    //    }
}

void nmSubWndMain::solveAndAnalyze()
{
    if(!s_pPendingSolverWindow.isNull() ||
       !s_pRunningSolverTask.isNull() ||
       m_bSolverResultCompletionPending) {
        QMessageBox::information(this, tr("solver error"), tr("task is running!"));
        return;
    }

    // Qt 4.8 下复用已经隐藏的进度框，避免窗口析构触发主界面重绘重入。
    if (m_pProgressDlg != nullptr) {
        m_pProgressDlg->reset();
        QPushButton* pCancelButton =
                m_pProgressDlg->findChild<QPushButton*>();
        if(pCancelButton != nullptr) {
            pCancelButton->setEnabled(true);
        }
    }

    // 新一次启动前清空旧上下文；后续所有检查通过后再成对写入。
    m_pSolverDataManager = nullptr;
    m_pSolverFitting = nullptr;

    // 根据当前数据中心的分析切换到对应的流动段分析窗口
    ZxMainWindow* pMainWnd1 = const_cast<ZxMainWindow*>(m_pMainWindow);

    if(nullptr == pMainWnd1) {
        return;
    }

    ZxTabWidget* pTabWx = pMainWnd1->getCurTabWx();
    iSubWndFitting* pSubWndFit = nmDataAnalyzeManager::getCurrentFitting();
    Q_ASSERT(pSubWndFit != nullptr);
    if(pSubWndFit == nullptr) {
        return;
    }
    if(pTabWx == nullptr) {
        return;
    }
    pTabWx->setCurrentWidget(pSubWndFit);

    nmDataAnalyzeManager* pDataManager =
            nmDataAnalyzeManager::findManagerByFitting(pSubWndFit);
    if(pDataManager == nullptr) {
        return;
    }

    // 第一步：求解时间轴必须由至少一口主动井的产注制度驱动。
    // 观察井可以完全不传产量，但不能在所有井都是观察井时启动无源汇计算。
    QVector<nmCalculationWellRef> vecEffectiveWells =
            pDataManager->getEffectiveCalculationWells();
    QHash<QString, nmDataWellBase*> mapWellsByCode;
    const QVector<nmDataWellBase*> vecAllWells =
            pDataManager->getWellDataList();
    for(int nIndex = 0; nIndex < vecAllWells.size(); ++nIndex) {
        nmDataWellBase* pWellData = vecAllWells[nIndex];
        if(pWellData != nullptr) {
            mapWellsByCode.insert(pWellData->getWellCode(), pWellData);
        }
    }
    bool bHasRateControlledWell = false;
    for(int nIndex = 0; nIndex < vecEffectiveWells.size(); ++nIndex) {
        const nmCalculationWellRef& oWellRef = vecEffectiveWells[nIndex];
        nmDataWellBase* pWellData =
                mapWellsByCode.value(oWellRef.m_sWellCode, nullptr);
        if(pWellData == nullptr) {
            QMessageBox::warning(this, tr("solver error"),
                                 tr("A selected well is missing from the map."));
            return;
        }

        if(oWellRef.m_eMode != NM_CaseWell_RateControlled) {
            continue;
        }

        bHasRateControlledWell = true;
        if(pWellData->getFlowPoints().size() < 2) {
            QMessageBox::warning(
                    this,
                    tr("solver error"),
                    tr("Rate-controlled well '%1' has no valid rate schedule.")
                        .arg(pWellData->getWellName()));
            return;
        }
    }
    if(!bHasRateControlledWell) {
        QMessageBox::warning(
                this,
                tr("solver error"),
                tr("At least one active production or injection well is required."));
        return;
    }

    // 手动求解可能直接启动, 因此必须在创建求解线程前初始化拟压力转换器.
    // pSubWndFit 保存的是当前拟合窗口克隆后的 PVT、拟压力及模型选项数据.
    // configPsAbouts() 会据此初始化常规、三区或组分转换器并设置当前模式.
    if(pDataManager->getSolverModelType() == SMT_Gas_VariablePvt) {
        iAnalRun* pAnalRun = pSubWndFit->getAnalRun();
        if(pAnalRun == nullptr
           || !pAnalRun->configPsAbouts(true,
                                        pSubWndFit->getModelOption(),
                                        false,
                                        pSubWndFit->getAllWxPtr())) {
            QMessageBox::warning(this, tr("solver error"),
                                 tr("Gas pseudo-pressure data is unavailable or invalid."));
            return;
        }
    }

    if(m_pSolverTask != nullptr) {
        // 上一次线程已结束但指针还未清空时，先交给Qt事件循环安全释放。
        m_pSolverTask->deleteLater();
        m_pSolverTask = nullptr;
    }

    // 第一步：捕获本次求解的完整窗口上下文，完成回调不得再读取全局当前窗口。
    m_pSolverDataManager = pDataManager;
    m_pSolverFitting = pSubWndFit;
    m_bSolverCancelRequested = false;

	// 第二步：先显示真实进度框，再在下一轮事件中捕获输入并启动线程。
	if (m_pProgressDlg == nullptr) 
	{
		m_pProgressDlg = new QProgressDialog(
                    tr("Preparing input snapshot..."),
                    tr("Stop"),
                    0,
                    0,
                    getMainWindow());
		m_pProgressDlg->setWindowTitle(tr("Solver Progress"));
		// 保持 8 月 25 日前的稳定行为。任务和输入快照负责数据安全，进度框不参与
		// 全局窗口阻塞，避免首次创建结果窗口时进入 Qt 4.8 模态布局重入。
		m_pProgressDlg->setWindowModality(Qt::NonModal);

        // 某些系统下，对话框右上角的关闭按钮可能仍存
        // 使用 WindowFlags 彻底禁用关闭按钮
        m_pProgressDlg->setWindowFlags(Qt::Dialog | Qt::WindowTitleHint | Qt::CustomizeWindowHint);
		m_pProgressDlg->setMinimumDuration(0);
		m_pProgressDlg->setAutoClose(false);
		m_pProgressDlg->setAutoReset(false);
		connect(m_pProgressDlg, SIGNAL(canceled()),
				this, SLOT(onSolverCancelRequested()));
	}
	
    m_pProgressDlg->setLabelText(tr("Preparing input snapshot..."));
    m_pProgressDlg->setRange(0, 0);
    m_pProgressDlg->show();

    m_pProgressDlg->raise();          // 提升层级到最前
    m_pProgressDlg->activateWindow(); // 激活窗口焦点

    m_bSolverStartPending = true;
    s_pPendingSolverWindow = this;
    QTimer::singleShot(0, this, SLOT(startSolverTask()));
}

void nmSubWndMain::startSolverTask()
{
    if(!m_bSolverStartPending) {
        return;
    }

    if(m_pProgressDlg == nullptr || m_pSolverDataManager.isNull() ||
       m_pSolverFitting.isNull()) {
        m_bSolverStartPending = false;
        if(s_pPendingSolverWindow == this) {
            s_pPendingSolverWindow = nullptr;
        }
        if(m_pProgressDlg != nullptr) {
            m_pProgressDlg->hide();
        }
        m_pSolverDataManager = nullptr;
        m_pSolverFitting = nullptr;
        return;
    }

    if(waitForPebiGridGeneration()) {
        return;
    }

    // 先创建不自动捕获的任务，使停止按钮在第一批井输入开始前就有明确接收者。
    m_pSolverTask = new nmCalculationDllPebiSolverTask(
                QString(),
                m_pSolverDataManager.data(),
                QString(),
                nullptr,
                true);
    s_pRunningSolverTask = m_pSolverTask;
    connect(m_pSolverTask, SIGNAL(sig_calculateDone(bool)),
            this, SLOT(on_solverTaskFinished(bool)),
            Qt::QueuedConnection);
    connect(m_pSolverTask, SIGNAL(sigStageChanged(QString,int,int)),
            this, SLOT(onSolverStageChanged(QString,int,int)),
            Qt::QueuedConnection);
    // 给 Windows 一次完成首帧绘制的机会；后续每个事件循环只捕获一口井。
    QTimer::singleShot(20, this, SLOT(continueSolverInputCapture()));
}

void nmSubWndMain::continueSolverInputCapture()
{
    if(!m_bSolverStartPending || m_pSolverTask == nullptr) {
        return;
    }

    if(waitForPebiGridGeneration()) {
        return;
    }

    bool bFinished = false;
    const bool bSucceeded =
            m_pSolverTask->captureManualInputStep(1, bFinished);
    if(!bSucceeded) {
        nmCalculationDllPebiSolverTask* pTask = m_pSolverTask;
        const bool bCancelled = pTask->wasCancelled();
        const bool bInputChanged =
                pTask->hasInputChanged(m_pSolverDataManager.data());
        m_pSolverTask = nullptr;
        if(pTask == s_pRunningSolverTask) {
            s_pRunningSolverTask = nullptr;
        }
        if(s_pPendingSolverWindow == this) {
            s_pPendingSolverWindow = nullptr;
        }
        m_bSolverStartPending = false;
        disconnectPebiGridGenerationWait();
        disconnect(pTask, nullptr, this, nullptr);
        pTask->deleteLater();

        if(bCancelled) {
            if(m_pProgressDlg != nullptr) {
                m_pProgressDlg->hide();
            }
            m_pSolverDataManager = nullptr;
            m_pSolverFitting = nullptr;
        } else {
            scheduleSolverResultCompletion(false, -1, -1, bInputChanged);
        }
        m_bSolverCancelRequested = false;
        return;
    }

    if(bFinished) {
        // 临时井对象指针已全部释放，只有完整值快照可以进入后台线程。
        m_bSolverStartPending = false;
        if(s_pPendingSolverWindow == this) {
            s_pPendingSolverWindow = nullptr;
        }
        disconnectPebiGridGenerationWait();
        m_pSolverTask->start();
        return;
    }

    QTimer::singleShot(0, this, SLOT(continueSolverInputCapture()));
}

void nmSubWndMain::onSolverStageChanged(
    QString sStage,
    int nCurrent,
    int nTotal)
{
    if(sender() != m_pSolverTask || m_pProgressDlg == nullptr ||
       m_bSolverCancelRequested) {
        return;
    }

    m_pProgressDlg->setLabelText(sStage);
    if(nTotal <= 0) {
        m_pProgressDlg->setRange(0, 0);
    } else {
        m_pProgressDlg->setRange(0, nTotal);
        m_pProgressDlg->setValue(qBound(0, nCurrent, nTotal));
    }
}

void nmSubWndMain::onSolverCancelRequested()
{
    if(m_bSolverStartPending &&
       (m_pSolverTask == nullptr || !m_pSolverTask->isRunning())) {
        // 等待建网或分批捕获期间尚未进入工作线程，可以立即撤销并释放值快照。
        nmCalculationDllPebiSolverTask* pTask = m_pSolverTask;
        m_pSolverTask = nullptr;
        m_bSolverStartPending = false;
        if(s_pPendingSolverWindow == this) {
            s_pPendingSolverWindow = nullptr;
        }
        disconnectPebiGridGenerationWait();
        if(pTask != nullptr) {
            pTask->requestCancel();
            if(pTask == s_pRunningSolverTask) {
                s_pRunningSolverTask = nullptr;
            }
            disconnect(pTask, nullptr, this, nullptr);
            pTask->deleteLater();
        }
        // QProgressDialog::cancel() 已隐藏窗口；保留对象供下一次求解复用。
        m_pSolverDataManager = nullptr;
        m_pSolverFitting = nullptr;
        m_bSolverCancelRequested = false;
        return;
    }

    if(m_pSolverTask != nullptr) {
        m_bSolverCancelRequested = true;
        m_pSolverTask->requestCancel();
        if(m_pProgressDlg != nullptr) {
            // DLL 没有取消导出；若已进入 DLL，只能等待其返回后丢弃结果。
            m_pProgressDlg->setLabelText(
                        tr("Stopping; waiting for the current solver call to return..."));
            m_pProgressDlg->setRange(0, 0);
            QPushButton* pCancelButton =
                    m_pProgressDlg->findChild<QPushButton*>();
            if(pCancelButton != nullptr) {
                pCancelButton->setEnabled(false);
            }
            m_pProgressDlg->show();
            m_pProgressDlg->raise();
        }
    }
}

bool nmSubWndMain::waitForPebiGridGeneration()
{
    nmDataAnalyzeManager* pDataManager = m_pSolverDataManager.data();
    if(!m_bSolverStartPending || pDataManager == nullptr ||
       !pDataManager->isPebiGridGenerationActive()) {
        disconnectPebiGridGenerationWait();
        return false;
    }

    // 这里只等待主线程提交信号，不获取网格锁；进度框和停止按钮保持可响应。
    connect(pDataManager,
            SIGNAL(sigPebiGridGenerationFinished(quint64,bool)),
            this,
            SLOT(onPebiGridGenerationFinished(quint64,bool)),
            Qt::UniqueConnection);
    if(m_pProgressDlg != nullptr) {
        m_pProgressDlg->setLabelText(
                    tr("Waiting for current grid generation..."));
        m_pProgressDlg->setRange(0, 0);
    }
    return true;
}

void nmSubWndMain::disconnectPebiGridGenerationWait()
{
    nmDataAnalyzeManager* pDataManager = m_pSolverDataManager.data();
    if(pDataManager == nullptr) {
        return;
    }

    disconnect(pDataManager,
               SIGNAL(sigPebiGridGenerationFinished(quint64,bool)),
               this,
               SLOT(onPebiGridGenerationFinished(quint64,bool)));
}

void nmSubWndMain::onPebiGridGenerationFinished(
    quint64 nGridInputRevision,
    bool bSucceeded)
{
    Q_UNUSED(nGridInputRevision);
    Q_UNUSED(bSucceeded);

    nmDataAnalyzeManager* pDataManager = m_pSolverDataManager.data();
    if(sender() != pDataManager || !m_bSolverStartPending ||
       pDataManager == nullptr ||
       pDataManager->isPebiGridGenerationActive()) {
        return;
    }

    disconnectPebiGridGenerationWait();
    if(m_pProgressDlg != nullptr) {
        m_pProgressDlg->setLabelText(tr("Preparing input snapshot..."));
        m_pProgressDlg->setRange(0, 0);
    }

    // 失败或版本过期也恢复原流程，由快照缓存检查决定是否重新生成一次网格。
    if(m_pSolverTask == nullptr) {
        QTimer::singleShot(0, this, SLOT(startSolverTask()));
    } else {
        QTimer::singleShot(0, this, SLOT(continueSolverInputCapture()));
    }
}

void nmSubWndMain::triggerToolBarAction(int index)
{
    // 获取多边形边界的绘制，并模拟触发点击操作
    // 目前多边形边界绘制是工具栏的第4个，所以用 3
    if (m_pPlotToolBar == nullptr) return;
    QList<QAction *> actions = m_pPlotToolBar->actions();

    if(!actions.isEmpty() && index >= 0 && index < actions.count()) {
        QAction *action = actions[index];
        action->trigger();
    }
}

bool nmSubWndMain::mergeAnaResultToFitting()
{
    //QMessageBox::information(this, tr("solver success"), tr("solver succeed!"));

    /*if (m_parameterPropertyWindow != nullptr) {
    	delete m_parameterPropertyWindow;
    	m_parameterPropertyWindow = nullptr;
    }

    m_parameterPropertyWindow = new nmWxParameterProperty(this);
    m_parameterPropertyWindow->show();*/

    ZxMainWindow* pMainWnd1 = const_cast<ZxMainWindow*>(m_pMainWindow);

    if(nullptr == pMainWnd1) {
        return false;
    }

    iSubWndFitting* pSubWndFit = !m_pSolverFitting.isNull()
            ? m_pSolverFitting.data() : nmDataAnalyzeManager::getCurrentFitting();
    Q_ASSERT(pSubWndFit != nullptr);
    if(pSubWndFit == nullptr) {
        return false;
    }

    // 历史压力数据
    QVector<QVector<double >> vvecHistoryData;
    // 双对数数据
    QVector<QVector<double >> vvecLogPreData;
    // 半对数数据
    QVector<QVector<double >> vvecSemiLogPreData;

    nmDataAnalyzeManager* pInstance = !m_pSolverDataManager.isNull()
            ? m_pSolverDataManager.data()
            : nmDataAnalyzeManager::getCurrentInstance();
    if(pInstance == nullptr) {
        return false;
    }

    // 捕获的拟合窗口和数据管理器必须仍保持原来的映射关系。
    if(nmDataAnalyzeManager::findManagerByFitting(pSubWndFit) != pInstance) {
        return false;
    }

    // 新一轮主动刷新替代尚未执行的旧请求；已经投递的旧槽会检测标记并直接返回。
    m_bPendingResultWidgetRefresh = false;
    m_pPendingResultDataManager = nullptr;
    m_pPendingResultFitting = nullptr;
    m_bPendingResultCompletionMessage = false;
    m_bPendingResultWindowReady = false;
    m_nPendingResultPebiCount = -1;
    m_nPendingResultSolveTimeMs = -1;

    QVector<nmSolverWellRef> vecWellsOrder =
            pInstance->hasPebiResults()
            ? pInstance->getResultSolverWellOrder()
            : pInstance->getSolverWellOrder();
    QString sCurrentResultWellCode = pInstance->getCurrentResultWellCode();

    // 当前结果井必须同时位于最后一次结果顺序并具备结果展示资格。
    // 无流量观察井虽然有内部压力结果，但不能成为曲线窗口的当前结果井。
    const bool bResultWellAvailable =
            pInstance->isWellAvailableForResult(sCurrentResultWellCode);
    bool bResultWellFound = false;
    for(int nIndex = 0; nIndex < vecWellsOrder.size(); ++nIndex) {
        const nmSolverWellRef& oWellRef = vecWellsOrder[nIndex];
        if(oWellRef.m_eEntryKind != NM_SolverEntry_Well) {
            continue;
        }
        if(bResultWellAvailable &&
           oWellRef.m_sWellCode == sCurrentResultWellCode) {
            bResultWellFound = true;
            break;
        }
    }
    if(!bResultWellFound) {
        for(int nIndex = 0; nIndex < vecWellsOrder.size(); ++nIndex) {
            if(vecWellsOrder[nIndex].m_eEntryKind == NM_SolverEntry_Well &&
               pInstance->isWellAvailableForResult(
                       vecWellsOrder[nIndex].m_sWellCode)) {
                sCurrentResultWellCode = vecWellsOrder[nIndex].m_sWellCode;
                break;
            }
        }
    }

    nmDataWellBase* pWellData = NULL;
    if(pInstance->getGridType() == NM_Grid_PEBI) {
        pWellData = pInstance->findWellByCode(sCurrentResultWellCode);
        if(pWellData == NULL) {
            return false;
        }
        pInstance->setCurrentResultWellCode(sCurrentResultWellCode);
        // 获取该井下存储的三条数据
        vvecHistoryData = pWellData->getResultPressure();
        vvecLogPreData = pWellData->getResultLogLog();
        vvecSemiLogPreData = pWellData->getResultSemiLog();
    }
    // 计算完成后同步查看井下拉框选中项
    nmWxNumericalDesign::notifyResultWellSelectorChanged(
            pInstance,
            sCurrentResultWellCode);

    // 半对数
    QVector<iCurveDesc> vecHalfLog;
    this->inithalfLog(vvecSemiLogPreData, vecHalfLog, false);
    FitSubRstTag tag = FSRT_SemiLog; // 半对数
    QString errorMessage;
    pSubWndFit->adjustFitSubPlotBy(tag, vecHalfLog, true, &errorMessage);

    // 双对数
    QVector<iCurveDesc> vecLogLog;
    this->initloglog(vvecLogPreData, vecLogLog, false);
    tag = FSRT_DoubleLog;
    pSubWndFit->adjustFitSubPlotBy(tag, vecLogLog, true, &errorMessage);

    // 历史压力曲线
    QVector<iCurveDesc> vecHistory;
    this->initPreHistory(vvecHistoryData, vecHistory, false);
    tag = FSRT_Hist;
    QString errorMessage4;
    pSubWndFit->adjustFitSubPlotBy(tag, vecHistory, true, &errorMessage4);

    if(pInstance->getGridType() != NM_Grid_PEBI) {
        return true;
    }

    // getFitSubRstWxOf(..., true) 会同步创建 iWxResult、挂入 MDI 并切换当前页。
    // 首次创建时只建立外层载体，待本轮 show/resize/layout 事件结束后再填充内容。
    QWidget* p3DWidget = pSubWndFit->getFitSubRstWxOf(
                FSRT_Nm3D, false, &errorMessage);
    if(p3DWidget == nullptr) {
        p3DWidget = pSubWndFit->getFitSubRstWxOf(
                    FSRT_Nm3D, true, &errorMessage);
        if(p3DWidget == nullptr) {
            return false;
        }

        m_pPendingResultDataManager = pInstance;
        m_pPendingResultFitting = pSubWndFit;
        m_bPendingResultWidgetRefresh = true;
        return true;
    }

    return populateResultWidgets(pSubWndFit, pInstance);
}

bool nmSubWndMain::populateResultWidgets(
    iSubWndFitting* pSubWndFit,
    nmDataAnalyzeManager* pDataManager)
{
    if(pSubWndFit == nullptr || pDataManager == nullptr ||
       pDataManager->getGridType() != NM_Grid_PEBI ||
       nmDataAnalyzeManager::findManagerByFitting(pSubWndFit) != pDataManager) {
        return false;
    }

    QString sErrorMessage;
    QWidget* p3DWidget = pSubWndFit->getFitSubRstWxOf(
                FSRT_Nm3D, true, &sErrorMessage);
    if(p3DWidget == nullptr) {
        return false;
    }

    nmWxPostprocessingAnimationWidget* pVtkWidget =
            p3DWidget->findChild<nmWxPostprocessingAnimationWidget*>();
    if(pVtkWidget != nullptr) {
        // 复用既有渲染窗口和 VTK 管道，只切换本轮已整体提交的数据。
        pVtkWidget->refreshResult();
    } else {
        pVtkWidget = new nmWxPostprocessingAnimationWidget(NULL, pDataManager);
        QLayout* p3DLayout = p3DWidget->layout();
        if(p3DLayout == nullptr) {
            p3DLayout = new QVBoxLayout(p3DWidget);
        } else {
            QLayoutItem* pItem = nullptr;
            while((pItem = p3DLayout->takeAt(0)) != nullptr) {
                if(pItem->widget() != nullptr) {
                    delete pItem->widget();
                }
                delete pItem;
            }
        }
        p3DLayout->addWidget(pVtkWidget);
    }

    // 结果参数界面
    QWidget* pResultPage = pSubWndFit->getFitSubRstWxOf(
                FSRT_NmRst, true, &sErrorMessage);
    if(pResultPage == nullptr) {
        return false;
    }

    nmWxParaPropertyPebi* pResultWidget =
            pResultPage->findChild<nmWxParaPropertyPebi*>();
    if(pResultWidget == nullptr) {
        // 与左侧共用属性面板类，结果区使用独立实例和只读参数列表。
        pResultWidget = new nmWxParaPropertyPebi;
        pResultWidget->initUI();
        pResultWidget->setDataManager(pDataManager);
        // 保持 8 月 24 日版本的稳定顺序：离屏完成参数构建后再加入可见布局。
        pResultWidget->rebuildResultParas();

        QLayout* pResultLayout = pResultPage->layout();
        if(pResultLayout == nullptr) {
            pResultLayout = new QVBoxLayout(pResultPage);
        } else {
            QLayoutItem* pItem = nullptr;
            while((pItem = pResultLayout->takeAt(0)) != nullptr) {
                if(pItem->widget() != nullptr) {
                    delete pItem->widget();
                }
                delete pItem;
            }
        }
        pResultLayout->addWidget(pResultWidget);
        return true;
    }

    pResultWidget->setDataManager(pDataManager);
    pResultWidget->rebuildResultParas();
    return true;
}

void nmSubWndMain::schedulePendingResultWidgets()
{
    if(m_bPendingResultWidgetRefresh) {
        QTimer::singleShot(0, this, SLOT(populatePendingResultWidgets()));
    }
}

void nmSubWndMain::populatePendingResultWidgets()
{
    if(!m_bPendingResultWidgetRefresh) {
        return;
    }

    iSubWndFitting* pSubWndFit = m_pPendingResultFitting.data();
    nmDataAnalyzeManager* pDataManager = m_pPendingResultDataManager.data();
    m_bPendingResultWidgetRefresh = false;
    m_pPendingResultDataManager = nullptr;
    m_pPendingResultFitting = nullptr;

    const bool bResultWindowReady =
            populateResultWidgets(pSubWndFit, pDataManager);
    if(m_bPendingResultCompletionMessage) {
        m_bPendingResultWindowReady = bResultWindowReady;
        QTimer::singleShot(
                    0,
                    this,
                    SLOT(showPendingSolverResultCompletion()));
    }
}

void nmSubWndMain::showPendingSolverResultCompletion()
{
    if(!m_bPendingResultCompletionMessage) {
        return;
    }

    const bool bResultWindowReady = m_bPendingResultWindowReady;
    const int nPebiCount = m_nPendingResultPebiCount;
    const int nSolveTimeMs = m_nPendingResultSolveTimeMs;
    m_bPendingResultCompletionMessage = false;
    m_bPendingResultWindowReady = false;
    m_nPendingResultPebiCount = -1;
    m_nPendingResultSolveTimeMs = -1;
    showSolverResultCompletion(bResultWindowReady,
                               nPebiCount,
                               nSolveTimeMs);
}

bool nmSubWndMain::inithalfLog(QVector<QVector<double >> & vvecLogPreData, QVector<iCurveDesc>& vecDescs, bool isHistoryData)
{
    // 半对数压力曲线
    iCurveDesc curveDesc;

    if(vvecLogPreData.size() != 2) {
        vecDescs.append(curveDesc);
        return false;
    }

    // X轴数据
    curveDesc.m_vecX = vvecLogPreData[0];
    // Y轴数据
    curveDesc.m_vecY = vvecLogPreData[1];

    curveDesc.m_oCurveType = POT_CurvePressure;

    // 判断是历史数据还是计算数据
    if(isHistoryData)	{
		curveDesc.m_sCurveName = s_SemiSouce_Curve;
        curveDesc.m_bLineVisible = false; // 关闭线模式可见性
		curveDesc.m_bPointVisible = true; // 开启点模式可见性
        curveDesc.m_oDot.setColor(Qt::red); // 设置点的颜色
        curveDesc.m_oDot.setStyle(ZxDotType::DTS_Cross); // x形状
    } else {
		curveDesc.m_sCurveName = s_SemiTheorySouce_Curve; // 理论曲线
        curveDesc.m_bLineVisible = true; // 开启线模式可见性
		curveDesc.m_bPointVisible = false; // 关闭点模式可见性
        curveDesc.m_oPen.setColor(Qt::green); // 设置线的颜色
    }

    // 将 curveDesc 添加到 QVector
    vecDescs.append(curveDesc);
    return true;
}

bool nmSubWndMain::initloglog(QVector<QVector<double> > &vvecLogPreData, QVector<iCurveDesc>& vecDescs, bool isHistoryData)
{
    // 双对数压力曲线
    iCurveDesc curveDesc1, curveDesc2;

    if(vvecLogPreData.size() != 3) {
        vecDescs.append(curveDesc1);
        vecDescs.append(curveDesc2);
        return false;
    }

    // 确保每个内部 QVector 都不为空，然后移除其最后一个元素
    // 移除 vvecLogPreData[0] (vX) 中的最后一个元素
    if(!vvecLogPreData[0].isEmpty()) {
        vvecLogPreData[0].remove(vvecLogPreData[0].size() - 1);
    } else {
        return false;
    }

    // 移除 vvecLogPreData[1] (vY) 中的最后一个元素
    if(!vvecLogPreData[1].isEmpty()) {
        vvecLogPreData[1].remove(vvecLogPreData[1].size() - 1);
    } else {
        return false;
    }

    // 移除 vvecLogPreData[2] (vZ) 中的最后一个元素
    if(!vvecLogPreData[2].isEmpty()) {
        vvecLogPreData[2].remove(vvecLogPreData[2].size() - 1);
    } else {
        return false;
    }

    // 曲线1
    curveDesc1.m_vecX = vvecLogPreData[0];
    curveDesc1.m_vecY = vvecLogPreData[1];
    // 曲线2
    curveDesc2.m_vecX = vvecLogPreData[0];
    curveDesc2.m_vecY = vvecLogPreData[2];

    curveDesc1.m_oCurveType = POT_CurveDiscrete;
    curveDesc2.m_oCurveType = POT_CurveDiscrete;
    
    // 判断是历史数据还是计算数据
    if(isHistoryData)	{
		curveDesc1.m_sCurveName = s_Souce_Curve;
		curveDesc2.m_sCurveName = s_Deriv_Curve;

		curveDesc1.m_bLineVisible = false; // 关闭线模式可见性
		curveDesc1.m_bPointVisible = true; // 开启点模式可见性
        curveDesc1.m_oDot.setColor(Qt::green); // 设置点的颜色
        curveDesc1.m_oDot.setStyle(ZxDotType::DTS_Cross); // X形状

		curveDesc2.m_bLineVisible = false; // 关闭线模式可见性
		curveDesc2.m_bPointVisible = true; // 开启点模式可见性
        curveDesc2.m_oDot.setColor(Qt::red); // 设置点的颜色
        curveDesc2.m_oDot.setStyle(ZxDotType::DTS_Circle); // O形状
		curveDesc2.m_oDot.setFilling(false); // 不填充
    } else {
	    curveDesc1.m_sCurveName = s_TheorySouce_Curve;
		curveDesc2.m_sCurveName = s_TheoryDeriv_Curve;

		curveDesc1.m_bLineVisible = true; // 关闭线模式可见性
		curveDesc1.m_bPointVisible = false; // 开启点模式可见性
        curveDesc1.m_oPen.setColor(Qt::red); // 设置线的颜色

		curveDesc2.m_bLineVisible = true; // 关闭线模式可见性
		curveDesc2.m_bPointVisible = false; // 开启点模式可见性
        curveDesc2.m_oPen.setColor(Qt::green); // 设置线的颜色
    }

    // 将 curveDesc 添加到 QVector
    vecDescs.append(curveDesc1);
    // 将 curveDesc 添加到 QVector
    vecDescs.append(curveDesc2);

    return true;
}

bool nmSubWndMain::initPreHistory(QVector<QVector<double> > &vvecHistoryData, QVector<iCurveDesc>& vecDescs, bool isHistoryData)
{
    // 压力曲线
    iCurveDesc curveDesc;

    if(vvecHistoryData.size() != 2) {
        vecDescs.append(curveDesc);
        return false;
    }

    // X轴数据
    curveDesc.m_vecX = vvecHistoryData[0];
    // Y轴数据
    curveDesc.m_vecY = vvecHistoryData[1];

	curveDesc.m_oCurveType = POT_CurvePressure;

    // 判断是历史数据还是计算数据
    if(isHistoryData)	{
		curveDesc.m_sCurveName = s_HistorySouce_CurveP;
		curveDesc.m_bLineVisible = false; // 关闭线模式可见性
		curveDesc.m_bPointVisible = true; // 开启点模式可见性
        curveDesc.m_oDot.setColor(Qt::red); // 设置点的颜色
        curveDesc.m_oDot.setStyle(ZxDotType::DTS_Plus); // +形状
    } else {
		curveDesc.m_sCurveName = s_HistoryFit_CurveP;
		curveDesc.m_bLineVisible = true; // 关闭线模式可见性
		curveDesc.m_bPointVisible = false; // 开启点模式可见性
        curveDesc.m_oPen.setColor(Qt::green); // 设置线的颜色
    }

    // 将 curveDesc 添加到 QVector
    vecDescs.append(curveDesc);
    return true;
}

bool nmSubWndMain::onConfirmClosing()
{
    // 正常关闭入口在求解结束前保持当前成果和 DataManager 存活；应用退出等绕过
    // 该确认流程的路径仍由析构函数 wait() 兜底。
    if(m_bSolverStartPending ||
       (m_pSolverTask != nullptr && m_pSolverTask->isRunning())) {
        QMessageBox::information(this, tr("solver error"), tr("task is running!"));
        return false;
    }

    return iSubWndBaseAF::onConfirmClosing();
}

void nmSubWndMain::reservoirCharacteristics()
{
    // 第一步：取得当前分析窗口对应的数据管理器，避免新对话框访问全局单例。
    nmDataAnalyzeManager* pDataManager = nmDataAnalyzeManager::getCurrentInstance();
    if (pDataManager == nullptr)
    {
        QMessageBox::warning(this, tr("Reservoir properties"),
                             tr("The current numerical well-test data is unavailable."));
        return;
    }

    // 第二步：在入口处组装数据源和编辑器，两个对象的生命周期覆盖整个模态会话。
    nmAnalyzeManagerReservoirDataSource oDataSource(pDataManager);
    nmWxReservoirPropertiesEditor oEditor(&oDataSource, this);

    // 第三步：先建立工作副本；初始化失败时不打开不完整的参数界面。
    QString sError;
    if (!oEditor.initialize(sError))
    {
        QMessageBox::warning(this, tr("Reservoir properties"), sError);
        return;
    }

    // 第四步：确定时由编辑会话一次性提交，取消时真实数据保持不变。
    oEditor.exec();
}

void nmSubWndMain::geoLayering()
{
    nmWxGeometryLayerDlg dlg;

    if(dlg.exec() == QDialog::Rejected) {
        return;
    } else {
        QVector<nmDataLayer*> layers = dlg.getLayerData();
        // 添加到数据中心
        nmDataAnalyzeManager::getCurrentInstance()->setLayers(layers);

        //for (int i = 0; i < layers.size(); ++i) {
        //    nmDataLayer* layer = layers[i];
        //    qDebug() << "Layer" << i + 1 << "Top:" << layer->getTop()
        //             << "Bottom:" << layer->getBottom()
        //             << "Thickness:" << layer->getThickness()
        //             << "IsChecked:" << layer->getIsChecked();
        //}
    }
}

bool nmSubWndMain::on_calculationFinished(NM_Calculation_Result result)
{
    if(result == NM_Calculation_Result_Success) {
        return this->mergeAnaResultToFitting();
    } else {
        // 如果失败，进度条其实没必要拉满了，直接提示错误
        QMessageBox::warning(this, tr("solver error"), tr("solver failed!"));
        return false;
    }
}

void nmSubWndMain::scheduleSolverResultCompletion(
    bool bSucceeded,
    int nPebiCount,
    int nSolveTimeMs,
    bool bInputChanged)
{
    s_pPendingSolverWindow = this;
    m_bSolverResultCompletionPending = true;
    m_bPendingSolverSucceeded = bSucceeded;
    m_bPendingSolverInputChanged = bInputChanged;
    m_nPendingSolverPebiCount = nPebiCount;
    m_nPendingSolverTimeMs = nSolveTimeMs;

    // 当前完成信号栈只登记后续工作；隐藏和结果刷新各占一轮独立事件。
    QTimer::singleShot(0, this, SLOT(dismissPendingSolverProgress()));
}

void nmSubWndMain::dismissPendingSolverProgress()
{
    if(m_pProgressDlg != nullptr) {
        m_pProgressDlg->hide();
    }
    QTimer::singleShot(0, this, SLOT(completePendingSolverResult()));
}

void nmSubWndMain::completePendingSolverResult()
{
    if(!m_bSolverResultCompletionPending) {
        return;
    }

    const bool bSucceeded = m_bPendingSolverSucceeded;
    const bool bInputChanged = m_bPendingSolverInputChanged;
    const int nPebiCount = m_nPendingSolverPebiCount;
    const int nSolveTimeMs = m_nPendingSolverTimeMs;
    m_bSolverResultCompletionPending = false;
    m_bPendingSolverSucceeded = false;
    m_bPendingSolverInputChanged = false;
    m_nPendingSolverPebiCount = -1;
    m_nPendingSolverTimeMs = -1;

    bool bResultWindowReady = false;
    if(bInputChanged) {
        QMessageBox::warning(
                    this,
                    tr("Solver result discarded"),
                    tr("The input changed while the solver was preparing or running. "
                       "The outdated result was discarded."));
    } else {
        bResultWindowReady = on_calculationFinished(bSucceeded
                ? NM_Calculation_Result_Success
                : NM_Calculation_Result_Fail);
    }

    // mergeAnaResultToFitting() 已使用完启动时捕获的上下文。
    m_pSolverDataManager = nullptr;
    m_pSolverFitting = nullptr;
    m_bSolverCancelRequested = false;

    if(bSucceeded && bResultWindowReady &&
       m_bPendingResultWidgetRefresh) {
        // 首次结果页尚未填充，最终提示必须等页面真实创建结果返回后再显示。
        m_bPendingResultCompletionMessage = true;
        m_nPendingResultPebiCount = nPebiCount;
        m_nPendingResultSolveTimeMs = nSolveTimeMs;
    } else if(bSucceeded) {
        showSolverResultCompletion(bResultWindowReady,
                                   nPebiCount,
                                   nSolveTimeMs);
    }

    // 首次结果载体创建后再跨一个事件循环填充，避免 Qt 4.8 布局重入。
    schedulePendingResultWidgets();
    if(s_pPendingSolverWindow == this) {
        s_pPendingSolverWindow = nullptr;
    }
}

void nmSubWndMain::showSolverResultCompletion(
    bool bResultWindowReady,
    int nPebiCount,
    int nSolveTimeMs)
{
    if(bResultWindowReady && nPebiCount >= 0 && nSolveTimeMs >= 0) {
        QMessageBox::information(this, tr("Solver completed"),
                                 tr("Grid count: %1\nSolve time: %2 ms")
                                     .arg(nPebiCount)
                                     .arg(nSolveTimeMs));
    } else if(!bResultWindowReady) {
        QMessageBox::warning(
                    this,
                    tr("Result display error"),
                    tr("Solver completed and the results were committed, but the "
                       "result window could not be opened."));
    }
}

void nmSubWndMain::on_solverTaskFinished(bool isSuccessed)
{
    // 第一步：只接受当前窗口实际启动的任务，忽略已经失效的旧回调。
    nmCalculationDllPebiSolverTask* pTask = qobject_cast<nmCalculationDllPebiSolverTask*>(sender());
    if(pTask == nullptr || pTask != m_pSolverTask) {
        return;
    }

    int nPebiCount = pTask != nullptr ? pTask->getPebiCount() : -1;
    int nSolveTimeMs = pTask != nullptr ? pTask->getSolveTimeMs() : -1;
    const bool bCancelled = pTask->wasCancelled();
    bool bInputChanged = false;
    // 后台线程只生成局部结果快照。回到主线程后先验证所属 DataManager 和
    // 输入版本，再整体替换旧成果；输入变化与真正的求解失败分别提示。
    if(isSuccessed && !bCancelled) {
        if(m_pProgressDlg != nullptr) {
            m_pProgressDlg->setLabelText(tr("Committing results..."));
            m_pProgressDlg->setRange(0, 0);
        }
        bInputChanged =
                pTask->hasInputChanged(m_pSolverDataManager.data());
        isSuccessed = pTask->commitResult(m_pSolverDataManager.data());
        bInputChanged = !isSuccessed && bInputChanged;
    } else if(bCancelled) {
        isSuccessed = false;
    }
    m_pSolverTask = nullptr;
    if(pTask == s_pRunningSolverTask) {
        s_pRunningSolverTask = nullptr;
    }
	// 正常完成路径由主线程延迟释放任务；析构路径则会等待并直接释放。
	pTask->deleteLater();

    // 第二步：停止不属于失败，也不允许触发结果提交或覆盖旧成果。
    if(bCancelled) {
        if(m_pProgressDlg != nullptr) {
            m_pProgressDlg->hide();
        }
        m_pSolverDataManager = nullptr;
        m_pSolverFitting = nullptr;
        m_bSolverCancelRequested = false;
    } else {
        scheduleSolverResultCompletion(isSuccessed,
                                       nPebiCount,
                                       nSolveTimeMs,
                                       bInputChanged);
    }
}

void nmSubWndMain::deleteOneObj()
{
    this->triggerToolBarAction(NMOT_Delete);
}

void nmSubWndMain::setLocked()
{
    if(m_lockState) { // 锁定
        m_lockState = false;

        int objCount = this->m_pWxPlot->m_pPlot->getObjCount();

        for(int i = 0; i < objCount; i++) {
            ZxObjBase* obj = this->m_pWxPlot->m_pPlot->getObjByIndex(i);

            if(!_isSame("nObjPointWell", obj->getTagName())) {
                obj->setReadOnly(false);
                obj->setLockPos(false);
            }
        }

        QStringList nIDs;
        nIDs.append("5125");
        nIDs.append("5124");
        nIDs.append("5123");
        nIDs.append("5114");
        nIDs.append("5115");
        nIDs.append("5116");
        nIDs.append("5117");
        nIDs.append("5118");
        nIDs.append("5119");
        nIDs.append("5102");
        nIDs.append("5120");
        nIDs.append("5103");
        nIDs.append("5104");
        nIDs.append("5105");
        nIDs.append("5106");
        nIDs.append("5107");
        // nIDs.append("5108"); // 新建井菜单暂时停用
        nIDs.append("5109");
        nIDs.append("5110");
        nIDs.append("5111");
        nIDs.append("5121");
        nIDs.append("5112");
        nIDs.append("5113");
        nIDs.append("5122");

        nIDs.append("9002");
        nIDs.append("9003");
        nIDs.append("9101");
        nIDs.append("9102");
        nIDs.append("9103");
        nIDs.append("9104");

        nIDs.append("3104");
        emit sigFreshRnStates(nIDs);
        /*
        if (m_pMainWindow != NULL) {
            //m_pMainWindow->slotFreshRnStates(nIDs);
        }
        */
        //m_pMainWindow->getMainRibbon
    } else {
        m_lockState = true;

        int objCount = this->m_pWxPlot->m_pPlot->getObjCount();

        for(int i = 0; i < objCount; i++) {
            ZxObjBase* obj = this->m_pWxPlot->m_pPlot->getObjByIndex(i);

            if(!_isSame("nObjPointWell", obj->getTagName())) {
                obj->setReadOnly(true);
                obj->setLockPos(true);
            }
        }

        QStringList nIDs;
        nIDs.append("5125");
        nIDs.append("5124");
        nIDs.append("5123");
        nIDs.append("5114");
        nIDs.append("5115");
        nIDs.append("5116");
        nIDs.append("5117");
        nIDs.append("5118");
        nIDs.append("5119");
        nIDs.append("5102");
        nIDs.append("5120");
        nIDs.append("5103");
        nIDs.append("5104");
        nIDs.append("5105");
        nIDs.append("5106");
        nIDs.append("5107");
        // nIDs.append("5108"); // 新建井菜单暂时停用
        nIDs.append("5109");
        nIDs.append("5110");
        nIDs.append("5111");
        nIDs.append("5121");
        nIDs.append("5112");
        nIDs.append("5113");
        nIDs.append("5122");

        //nIDs.append("9002");
        //nIDs.append("9003");
        nIDs.append("9101");
        nIDs.append("9102");
        nIDs.append("9103");
        nIDs.append("9104");

        nIDs.append("3104");
        emit sigFreshRnStates(nIDs);
        /*
        if (m_pMainWindow != NULL) {
        	m_pMainWindow->slotFreshRnStates(nIDs);
        }
        */
        /*
        emit sigFreshRnStates(nIDs);
        if (m_pMainWindow != NULL) {
            m_pMainWindow->slotFreshRnStates(nIDs);
        }

        bool b;
        QString sName = "NmUnlocked";
        int nID = 5119;
        bool bLicensed;
        nmSubWndMain::checkCmdEnable(b, sName, nID, bLicensed);
        nID = 5125;
        sName = "NmPrint";
        nmSubWndMain::checkCmdEnable(b, sName, nID, bLicensed);
        */
    }
}

nmGuiPlot * nmSubWndMain::getWxPlot() const
{
    return m_pWxPlot;
}

void nmSubWndMain::onWellSelected(const QString& sWellCode)
{
    nmDataAnalyzeManager* pInstance = nmDataAnalyzeManager::getCurrentInstance();
    if(pInstance == nullptr) {
        return;
    }

    nmDataWellBase* pWellData = pInstance->findWellByCode(sWellCode);

    if(pWellData == NULL)
        return;

    // 切换结果井只影响曲线展示，不再改变参数编辑井或主分析井。
    pInstance->setCurrentResultWellCode(sWellCode);

    // 1.获取流动段分析窗口
    iSubWndFitting* pSubWndFit = nmDataAnalyzeManager::getCurrentFitting();
    Q_ASSERT(pSubWndFit != nullptr);

    if(!pSubWndFit) return;

    // 2.根据选择的井名获取计算数据
    QVector<QVector<double>> vvecHistoryData;
    QVector<QVector<double>> vvecLogPreData;
    QVector<QVector<double>> vvecSemiLogPreData;

    if(pInstance->getGridType() == NM_Grid_PEBI) {
        vvecHistoryData = pWellData->getResultPressure();
        vvecLogPreData = pWellData->getResultLogLog();
        vvecSemiLogPreData = pWellData->getResultSemiLog();
    }

    // 调用函数
    QVector<QVector<double>> vvecHistoryPressureData; //压力历史数据
    QVector<QVector<double>> vvecHistoryLogData;      // 历史双对数曲线数据
    QVector<QVector<double>> vvecHistorySemiLogData;  // 历史半对数曲线数据

	pInstance->calculationLogData(pWellData, vvecHistoryPressureData, vvecHistoryLogData, vvecHistorySemiLogData);

    // 删除末尾无效元素
    //if (!vvecHistoryLogData.empty() &&
    //	vvecHistoryLogData.size() >= 3 &&           // 确保有3个子数组
    //	!vvecHistoryLogData[0].empty() &&           // 检查x数组非空
    //	!vvecHistoryLogData[1].empty() &&           // 检查y数组非空
    //	!vvecHistoryLogData[2].empty()) {           // 检查z数组非空
    //		// 同时删除x、y、z的最后一个数据点
    //		vvecHistoryLogData[0].removeLast();  // 删除最后一个x
    //		vvecHistoryLogData[1].removeLast();  // 删除最后一个y
    //		vvecHistoryLogData[2].removeLast();  // 删除最后一个z
    //}

    // 窗口标识，半对数、双对数、历史压力
    FitSubRstTag tag;
    // 错误信息
    QString errorMessage;

    // 3、半对数曲线
    QVector<iCurveDesc> vecHistoryHalfLog;
    this->inithalfLog(vvecHistorySemiLogData, vecHistoryHalfLog, true);
    tag = FSRT_SemiLog;
    // 删除原来的线，并将当前查看井的历史半对数曲线渲染出来
    pSubWndFit->adjustFitSubPlotBy(tag, vecHistoryHalfLog, true, &errorMessage);
    //计算出来的半对数数据，同样需要删除原来的
    QVector<iCurveDesc> vecHalfLog;
    this->inithalfLog(vvecSemiLogPreData, vecHalfLog, false);
    pSubWndFit->adjustFitSubPlotBy(tag, vecHalfLog, true, &errorMessage);

    // 双对数
    QVector<iCurveDesc> vecHistoryLog;
    this->initloglog(vvecHistoryLogData, vecHistoryLog, true);
    tag = FSRT_DoubleLog;
    // 删除原来的线，并将当前查看井的历史双对数曲线渲染出来
    pSubWndFit->adjustFitSubPlotBy(tag, vecHistoryLog, true, &errorMessage);
    //计算出来的双对数数据，同样需要删除原来的
    QVector<iCurveDesc> vecLogLog;
    this->initloglog(vvecLogPreData, vecLogLog, false);
    pSubWndFit->adjustFitSubPlotBy(tag, vecLogLog, true, &errorMessage);

    // 历史压力曲线
    QVector<iCurveDesc> vecHistoryPre;
    this->initPreHistory(vvecHistoryPressureData, vecHistoryPre, true);
    tag = FSRT_Hist;
    // 删除原来的线，并将当前查看井的历史压力曲线渲染出来
    pSubWndFit->adjustFitSubPlotBy(tag, vecHistoryPre, true, &errorMessage);
    //计算出来的压力数据，同样需要删除原来的
    QVector<iCurveDesc> vecHistory;
    this->initPreHistory(vvecHistoryData, vecHistory, false);
    pSubWndFit->adjustFitSubPlotBy(tag, vecHistory, true, &errorMessage);
}

#include <Windows.h>

//void nmSubWndMain::calculationLogData(
//    nmDataWellBase* pWellData,
//    QVector<QVector<double>>& vvecHistoryData,
//    QVector<QVector<double>>& vvecLogPreData,
//    QVector<QVector<double>>& vvecSemiLogPreData)
//{
//    // 清空输出参数
//    vvecHistoryData.clear();
//    vvecLogPreData.clear();
//    vvecSemiLogPreData.clear();
//
//    if(pWellData == nullptr) {
//        return;
//    }
//
//    // 初始化二维数组结构
//    vvecHistoryData.resize(2);     // [0]=x, [1]=y
//    vvecLogPreData.resize(3);      // [0]=x, [1]=y, [2]=z
//    vvecSemiLogPreData.resize(2);  // [0]=x, [1]=pointData[0]
//
//    // 准备压力数据
//    QVector<QPointF> vecPressure = pWellData->getPressurePoints();
//    std::vector<Point> wellPressureData;
//
//    // 填充 wellPressureData 和 vvecHistoryData
//    foreach(const QPointF& qpoint, vecPressure) {
//        // wellPressureData
//        Point pt;
//        pt.x = qpoint.x();
//        pt.y = qpoint.y();
//        pt.z = 0.0;
//        wellPressureData.push_back(pt);
//
//        // vvecHistoryData
//        vvecHistoryData[0].append(qpoint.x());  // x
//        vvecHistoryData[1].append(qpoint.y());  // y
//    }
//
//    // 准备流量段数据
//    QVector<QPointF> vecTimeQ = pWellData->getFlowPoints();
//    int nTimeNumQ = vecTimeQ.size() - 1;
//    std::vector<double> timeQ(nTimeNumQ);
//    std::vector<double> q(nTimeNumQ);
//
//    for(int i = 0; i < nTimeNumQ; ++i) {
//        timeQ[i] = vecTimeQ[i + 1].x();
//        q[i] = vecTimeQ[i + 1].y();
//    }
//
//    // 调用 DLL 计算双对数曲线
//    std::vector<Point> logPre;
//    int iSectionFlowIndex = pWellData->getIndexF();
//
//    HMODULE hMod_solver = LoadLibrary(L"singlePhaseSolverDll.dll");
//
//    if(hMod_solver) {
//        typedef bool (*PreLog)(const std::vector<Point>&, const int&, double*, double*, int, std::vector<Point>&);
//        PreLog preLogFun = (PreLog)GetProcAddress(hMod_solver, "logLogPre");
//
//		if(nullptr == preLogFun) {
//			FreeLibrary(hMod_solver);
//			std::cout << "preLogFun failed!\n";
//			return;
//		}
//
//		preLogFun(wellPressureData, iSectionFlowIndex, timeQ.data(), q.data(), nTimeNumQ, logPre);
//
//		// 不添加最后一个元素
//		for(uint i = 0; i < logPre.size() - 1; i++) {
//			//logFile << logPre[i].x << "\t" << logPre[i].y << "\t" << logPre[i].z << "\t" << std::endl;
//			vvecLogPreData[0].append(logPre[i].x);  // x
//			vvecLogPreData[1].append(logPre[i].y);  // y
//			vvecLogPreData[2].append(logPre[i].z);  // z
//		}
//
//		// 填充半对数曲线数据 (x, pointData[0])
//		foreach(const auto& point, logPre) {
//			vvecSemiLogPreData[0].append(point.x);  // x
//			double y_value = point.pointData.empty() ? 0.0 : point.pointData[0];
//			vvecSemiLogPreData[1].append(y_value);  // pointData[0] 或默认值
//		}
//        FreeLibrary(hMod_solver);
//    }
//}

void nmSubWndMain::onGenerateButtonClicked()
{
    if(nmDataAnalyzeManager::getCurrentInstance()->getGridType() == NM_Grid_PEBI) {
        // 求解任务创建时会捕获完整输入。网格无效时，工作线程只基于值快照生成
        // 一次局部网格，求解成功后再和全部结果一起回主线程提交。
        this->solveAndAnalyze();
    }
}

void nmSubWndMain::generateDFN()
{
    nmWxDFN dfnDialog(nullptr);
    dfnDialog.exec();
}

void nmSubWndMain::displaySetting()
{
    nmWxDisplaySettings disPlayDlg;
    disPlayDlg.exec();
}

void nmSubWndMain::updateMapByDataManager(nmDataAnalyzeManager* pDataManager)
{
    // 删除原来的图元信息
    if(m_pWxPlot == nullptr || pDataManager == nullptr) {
        return;
    }

    // 一个Map同一时间只展示一个分析的数据，切换前先解除其他DataManager对当前Plot的绑定。
    foreach(nmDataAnalyzeManager* pManager, nmDataAnalyzeManager::s_mapDataAnalManager.values()) {
        if(pManager != nullptr && pManager != pDataManager && pManager->getPlot() == m_pWxPlot) {
            pManager->setPlot(nullptr);
        }
    }

    // 更新对应的Plot成员变量
    pDataManager->setPlot(m_pWxPlot);

    m_pWxPlot->deleteAllPlotObjs();

    // 切换分析时更新 Binder 绑定的 DataManager，
    // 确保用户新画断层时添加到正确的 DataManager
    if(m_pWxPlot->graphicBinder()) {
        m_pWxPlot->graphicBinder()->updateDataMgr(pDataManager);
    }

    // 根据数据中心内容绘制新图元
    m_pWxPlot->setPlotsByDataManger(pDataManager);
}