#include "nmWxForecast.h"
#include <QApplication>
#include <QStyle>
#include <QSpacerItem>
#include <QSizePolicy>
#include <QLabel>

nmWxForecast::nmWxForecast(QWidget *parent)
	: iDlgBase(parent)
	, m_initialPressureComponent(nullptr)
	, m_abandonmentRateComponent(nullptr)
	, m_maximumRateComponent(nullptr)
	, m_forecastDurationComponent(nullptr)
	, m_producingPressureComponent(nullptr)
	, m_producingPressureEndComponent(nullptr)
	, m_pressureChangePeriodComponent(nullptr)
	, m_pressureTableWidget(nullptr)
	, m_pDurationUnitCombo(nullptr)
	, m_pPressureUnitCombo(nullptr)
	, m_rateTableWidget(nullptr)
	, m_rDurationUnitCombo(nullptr)
	, m_rRateUnitCombo(nullptr) 
	, m_extMultiR(nullptr)
	, m_extStackedWidget(nullptr) 
	, m_extEmpty(nullptr)
{
	setWindowTitle("Forecast");
	setFixedSize(520, 560);

	PressureRow tempDefaults;
	m_currentDurationUnit = tempDefaults.duration.getUnit();
	m_currentPressureUnit = tempDefaults.pressure.getUnit();

	FlowRow tempFlowDefaults;
	m_currentRateUnit = tempFlowDefaults.q0.getUnit();

	// 先构建UI
	setupUI();
	setupConnections();

	// 从数据中心加载数据
	loadDataFromManager();

	// 根据加载的数据更新界面
	updateParametersForOption();
}

nmWxForecast::~nmWxForecast()
{
}

void nmWxForecast::loadDataFromManager()
{
	// 从数据中心获取预测数据的副本
	nmDataAnalyzeManager* pManager = nmDataAnalyzeManager::getCurrentInstance();

	if(pManager) {
		m_forecastData = pManager->getForecastDataCopy();

		// 根据数据设置单选按钮
		nmDataForecast::ForecastOption option = m_forecastData.getForecastOption();

		switch(option) {
		case nmDataForecast::ConstantPressureOption:
			m_constantPressureRadio->setChecked(true);
			break;

		case nmDataForecast::DecliningPressureOption:
			m_decliningPressureRadio->setChecked(true);
			break;

		case nmDataForecast::MultiplePressuresOption:
			m_multiplePressuresRadio->setChecked(true);
			break;
		case nmDataForecast::MultipleRatesOption:
			m_multipleRatesRadio->setChecked(true);
			break;
		}
	} else {
		// 如果数据中心不存在，使用默认数据
		m_constantPressureRadio->setChecked(true);
		m_forecastData.setForecastOption(nmDataForecast::ConstantPressureOption);
	}
}

void nmWxForecast::saveDataToManager()
{
	// 先从界面更新数据
	updateDataFromUI();

	// 保存到数据中心
	nmDataAnalyzeManager* pManager = nmDataAnalyzeManager::getCurrentInstance();

	if(pManager) {
		pManager->updateForecastData(m_forecastData);
	}
}

void nmWxForecast::setupUI()
{
	m_mainLayout = new QVBoxLayout(this);

	// ========== Forecast options ==========
	m_forecastOptionsGroup  = new QGroupBox("Forecast options", this);
	m_forecastOptionsLayout = new QVBoxLayout(m_forecastOptionsGroup);

	m_constantPressureRadio   = new QRadioButton("Constant pressure", this);
	m_decliningPressureRadio  = new QRadioButton("Declining pressure (ramp)", this);
	m_multiplePressuresRadio  = new QRadioButton("Multiple pressures", this);
	m_multipleRatesRadio      = new QRadioButton("Multiple rates", this);

	m_forecastButtonGroup = new QButtonGroup(this);
	m_forecastButtonGroup->addButton(m_constantPressureRadio, 0);
	m_forecastButtonGroup->addButton(m_decliningPressureRadio, 1);
	m_forecastButtonGroup->addButton(m_multiplePressuresRadio, 2);
	m_forecastButtonGroup->addButton(m_multipleRatesRadio, 3);

	m_usePastHistoryCheck   = new QCheckBox("Use past history", this);
	m_surfacePressuresCheck = new QCheckBox("Surface pressures", this);
	m_usePastHistoryCheck->setEnabled(false);
	m_surfacePressuresCheck->setEnabled(false);

	m_forecastOptionsLayout->addWidget(m_constantPressureRadio);
	m_forecastOptionsLayout->addWidget(m_decliningPressureRadio);
	m_forecastOptionsLayout->addWidget(m_multiplePressuresRadio);
	m_forecastOptionsLayout->addWidget(m_multipleRatesRadio);

	QHBoxLayout *checkBoxLayout = new QHBoxLayout();
	checkBoxLayout->addWidget(m_usePastHistoryCheck);
	checkBoxLayout->addWidget(m_surfacePressuresCheck);
	checkBoxLayout->addStretch();
	m_forecastOptionsLayout->addLayout(checkBoxLayout);

	// ========== Parameters ==========
	m_parametersGroup  = new QGroupBox("Parameters", this);
	QVBoxLayout *parametersOuterLayout = new QVBoxLayout(m_parametersGroup);
	parametersOuterLayout->setContentsMargins(6, 6, 6, 6);

	// 基础区
	QWidget *baseWidget = new QWidget(this);
	m_parametersLayout  = new QGridLayout(baseWidget);
	m_parametersLayout->setHorizontalSpacing(8);
	m_parametersLayout->setVerticalSpacing(8);
	m_parametersLayout->setColumnStretch(0, 0);  // 复选框列
	m_parametersLayout->setColumnStretch(1, 1);  // 组件列（会自动扩展）

	int row = 0;

	// 1. 创建一个“占位符” (strut)，用于永久撑开第0列
	QWidget* column0Strut = new QWidget(this);
	// 2. 将占位符添加到 (row 0, col 0)
	m_parametersLayout->addWidget(column0Strut, row, 0); 

	// (row 0) Initial pressure
	ConstantPressure& constantPressureData = m_forecastData.getConstantPressureData();
	m_initialPressureComponent = new nmGUIComponentLineEdit(
		&constantPressureData.getInitialPressure(),
		true,
		this
		);
	m_parametersLayout->addWidget(m_initialPressureComponent, row, 1);
	row++;

	// (row 1) Abandonment rate
	m_abandonmentRateCheck = new QCheckBox(this);
	m_abandonmentRateComponent = new nmGUIComponentLineEdit(&constantPressureData.getAbandonmentRate(), true, this);
	// 创建 QStackedWidget 来包裹 组件
	m_abandonmentStack = new QStackedWidget(this);
	m_abandonmentSpacer = new QWidget(this);
	// 使用组件的高度来设置占位符高度
	m_abandonmentSpacer->setFixedHeight(m_abandonmentRateComponent->sizeHint().height()); 
	m_abandonmentStack->addWidget(m_abandonmentRateComponent); // 第 0 页 (组件)
	m_abandonmentStack->addWidget(m_abandonmentSpacer);        // 第 1 页 (占位符)
	m_parametersLayout->addWidget(m_abandonmentRateCheck, row, 0); // 将复选框添加到第 0 列
	m_parametersLayout->addWidget(m_abandonmentStack, row, 1);     // 将堆栈(内含组件)添加到第 1 列
	row++;

	// (row 2) Maximum rate
	m_maximumRateCheck = new QCheckBox(this);
	m_maximumRateComponent = new nmGUIComponentLineEdit(&m_forecastData.getConstantPressureData().getMaximumRate(), true, this);
	// 创建 QStackedWidget 来包裹组件
	m_maximumStack = new QStackedWidget(this);
	m_maximumSpacer = new QWidget(this);
	m_maximumSpacer->setFixedHeight(m_maximumRateComponent->sizeHint().height());
	m_maximumStack->addWidget(m_maximumRateComponent); // 第 0 页 (组件)
	m_maximumStack->addWidget(m_maximumSpacer);        // 第 1 页 (占位符)
	m_parametersLayout->addWidget(m_maximumRateCheck, row, 0); // 将复选框添加到第 0 列
	m_parametersLayout->addWidget(m_maximumStack, row, 1);     // 将堆栈(内含组件)添加到第 1 列
	row++;

	// (row 3) Forecast duration
	m_forecastDurationComponent = new nmGUIComponentLineEdit(&m_forecastData.getConstantPressureData().getForecastDuration(), true, this);
	m_parametersLayout->addWidget(m_forecastDurationComponent, row, 1);
	row++;

	// 设置占位符的固定宽度，使其等于复选框的宽度
	int chkBoxWidth = m_abandonmentRateCheck->minimumSizeHint().width();
	column0Strut->setFixedWidth(chkBoxWidth);

	// (row 4) Producing pressure
	m_producingPressureComponent = new nmGUIComponentLineEdit(&m_forecastData.getConstantPressureData().getProducingPressure(), true, this);
	m_parametersLayout->addWidget(m_producingPressureComponent, row, 1);
	row++;

	// ========== 扩展区：固定位置添加所有扩展组件 ==========

	// --- 1. 先构建所有扩展页面 ---

	// (row 5) Ramp 扩展组件 (原row 5)
	m_extRamp = buildExtRampPage();

	// (row 6) Multiple Pressures 表格 (原row 6)
	m_extMultiP = buildExtMultiPressurePage();
	m_extMultiP->setMinimumHeight(80);

	// (row 7) Multiple Rates 表格
	m_extMultiR = buildExtMultiRatePage();
	m_extMultiR->setMinimumHeight(80);

	// --- 2. 创建一个空页面---
	m_extEmpty = buildExtEmptyPage("");

	// --- 3. 创建 QStackedWidget 并添加所有页面 ---
	m_extStackedWidget = new QStackedWidget(this);
	m_extStackedWidget->addWidget(m_extEmpty);  // 页面 0
	m_extStackedWidget->addWidget(m_extRamp);   // 页面 1
	m_extStackedWidget->addWidget(m_extMultiP); // 页面 2
	m_extStackedWidget->addWidget(m_extMultiR); // 页面 3

	// --- 4. 将 QStackedWidget 添加到布局的固定位置 (row 5) ---
	m_parametersLayout->addWidget(m_extStackedWidget, row, 1);
	row++; // row 变为 6

	parametersOuterLayout->addWidget(baseWidget);
	//parametersOuterLayout->addWidget(m_extStackedWidget);

	// ========== Buttons ==========
	m_buttonLayout   = new QHBoxLayout();
	m_loadDataButton = new QPushButton("Load data", this);
	m_generateButton = new QPushButton("Generate", this);
	m_cancelButton   = new QPushButton("Cancel", this);
	m_loadDataButton->setEnabled(false);

	m_buttonLayout->addWidget(m_loadDataButton);
	m_buttonLayout->addStretch();
	m_buttonLayout->addWidget(m_generateButton);
	m_buttonLayout->addWidget(m_cancelButton);

	// ========== Main ==========
	m_mainLayout->addWidget(m_forecastOptionsGroup);
	m_mainLayout->addWidget(m_parametersGroup);
	m_mainLayout->addStretch();
	m_mainLayout->addLayout(m_buttonLayout);

	// 收集所有组件
	QList<nmGUIComponentLineEdit*> allComponents;
	allComponents.append(m_initialPressureComponent);
	allComponents.append(m_abandonmentRateComponent);
	allComponents.append(m_maximumRateComponent);
	allComponents.append(m_forecastDurationComponent);
	allComponents.append(m_producingPressureComponent);
	allComponents.append(m_producingPressureEndComponent);
	allComponents.append(m_pressureChangePeriodComponent);

	// 计算最大标签宽度
	int maxLabelWidth = 0;

	for(int i = 0; i < allComponents.size(); ++i) {
		if(allComponents.at(i)) {
			// 获取标签控件（假设是第一个子控件）
			QLabel* label = allComponents.at(i)->findChild<QLabel*>();

			if(label) {
				int w = label->sizeHint().width();

				if(w > maxLabelWidth) {
					maxLabelWidth = w;
				}
			}
		}
	}

	// 设置统一的标签宽度（+10 像素余量）
	for(int i = 0; i < allComponents.size(); ++i) {
		if(allComponents.at(i)) {
			QLabel* label = allComponents.at(i)->findChild<QLabel*>();

			if(label) {
				label->setMinimumWidth(maxLabelWidth + 10);
				label->setMaximumWidth(maxLabelWidth + 10);
			}
		}
	}
}

QWidget* nmWxForecast::buildExtEmptyPage(const QString& text)
{
	QWidget *root = new QWidget(this);
	QVBoxLayout *v = new QVBoxLayout(root);
	v->setContentsMargins(0, 0, 0, 0);

	if(!text.isEmpty()) {
		QLabel *lbl = new QLabel(text, root);
		lbl->setAlignment(Qt::AlignCenter);
		v->addStretch();
		v->addWidget(lbl);
		v->addStretch();
	} else {
		v->addSpacing(1);
	}

	root->setMinimumHeight(80);
	return root;
}

QWidget* nmWxForecast::buildExtMultiPressurePage()
{
	QWidget *root = new QWidget(this);
	QVBoxLayout *layout = new QVBoxLayout(root);
	layout->setContentsMargins(0, 0, 0, 0);
	layout->setSpacing(8);

	// 创建表格
	m_pressureTableWidget = new QTableWidget(0, 2);
	m_pressureTableWidget->setHorizontalHeaderLabels(QStringList() << "Duration" << "Pressure");
	m_pressureTableWidget->verticalHeader()->setVisible(false);
	m_pressureTableWidget->horizontalHeader()->setResizeMode(QHeaderView::Stretch);

	// 表头下的“单位”行
	m_pressureTableWidget->insertRow(0);
	m_pressureTableWidget->setRowHeight(0, 24); // 设置一个合适的高度

	PressureRow tempDefaults; // 用于获取单位列表
	QStringList durationUnits = tempDefaults.duration.getListUnitSelections();
	QStringList pressureUnits = tempDefaults.pressure.getListUnitSelections();

	// --- 第0列：Duration 单位下拉框 ---
	m_pDurationUnitCombo = new QComboBox(m_pressureTableWidget);

	if(!durationUnits.isEmpty()) {
		m_pDurationUnitCombo->addItems(durationUnits);
	}

	m_pDurationUnitCombo->setCurrentIndex(m_pDurationUnitCombo->findText(m_currentDurationUnit)); // 设置当前单位
	// 设置样式
	m_pDurationUnitCombo->setEditable(true);
	m_pDurationUnitCombo->lineEdit()->setAlignment(Qt::AlignCenter);
	m_pDurationUnitCombo->lineEdit()->setReadOnly(true);
	m_pDurationUnitCombo->setStyleSheet(
		"QComboBox { border: none; background: transparent; padding-left: 4px; }"
		"QComboBox::drop-down { border: none; }"
		);
	m_pressureTableWidget->setCellWidget(0, 0, m_pDurationUnitCombo);

	// --- 第1列：Pressure 单位下拉框 ---
	m_pPressureUnitCombo = new QComboBox(m_pressureTableWidget);

	if(!pressureUnits.isEmpty()) {
		m_pPressureUnitCombo->addItems(pressureUnits);
	}

	m_pPressureUnitCombo->setCurrentIndex(m_pPressureUnitCombo->findText(m_currentPressureUnit)); // 设置当前单位
	// 设置样式
	m_pPressureUnitCombo->setEditable(true);
	m_pPressureUnitCombo->lineEdit()->setAlignment(Qt::AlignCenter);
	m_pPressureUnitCombo->lineEdit()->setReadOnly(true);
	m_pPressureUnitCombo->setStyleSheet(
		"QComboBox { border: none; background: transparent; padding-left: 4px; }"
		"QComboBox::drop-down { border: none; }"
		);
	m_pressureTableWidget->setCellWidget(0, 1, m_pPressureUnitCombo);

	layout->addWidget(m_pressureTableWidget);
	return root;
}

QTableWidgetItem* nmWxForecast::makeCenteredEmptyItem()
{
	QTableWidgetItem* it = new QTableWidgetItem();
	it->setTextAlignment(Qt::AlignCenter);
	return it;
}

QWidget* nmWxForecast::buildExtMultiRatePage()
{
	QWidget *root = new QWidget(this);
	QVBoxLayout *layout = new QVBoxLayout(root);
	layout->setContentsMargins(0, 0, 0, 0);   layout->setSpacing(8);

	// 创建表格
	m_rateTableWidget = new QTableWidget(0, 2);
	// 根据截图设置表头
	m_rateTableWidget->setHorizontalHeaderLabels(QStringList() << "Duration" << "Qo"); 
	m_rateTableWidget->verticalHeader()->setVisible(false);
	m_rateTableWidget->horizontalHeader()->setResizeMode(QHeaderView::Stretch);

	// 表头下的“单位”行
	m_rateTableWidget->insertRow(0);
	m_rateTableWidget->setRowHeight(0, 24); 

	FlowRow tempDefaults; // 使用 FlowRow 获取单位
	QStringList durationUnits = tempDefaults.duration.getListUnitSelections();
	QStringList rateUnits = tempDefaults.q0.getListUnitSelections(); // 获取速率单位

	// --- 第0列：Duration 单位下拉框 ---
	m_rDurationUnitCombo = new QComboBox(m_rateTableWidget);

	if(!durationUnits.isEmpty()) {
		m_rDurationUnitCombo->addItems(durationUnits);
	}

	m_rDurationUnitCombo->setCurrentIndex(m_rDurationUnitCombo->findText(m_currentDurationUnit)); 
	m_rDurationUnitCombo->setEditable(true);
	m_rDurationUnitCombo->lineEdit()->setAlignment(Qt::AlignCenter);
	m_rDurationUnitCombo->lineEdit()->setReadOnly(true);
	m_rDurationUnitCombo->setStyleSheet(
		"QComboBox { border: none; background: transparent; padding-left: 4px; }"
		"QComboBox::drop-down { border: none; }"
		);
	m_rateTableWidget->setCellWidget(0, 0, m_rDurationUnitCombo);

	// --- 第1列：Rate (Qo) 单位下拉框 ---
	m_rRateUnitCombo = new QComboBox(m_rateTableWidget);

	if(!rateUnits.isEmpty()) {
		m_rRateUnitCombo->addItems(rateUnits);
	}

	m_rRateUnitCombo->setCurrentIndex(m_rRateUnitCombo->findText(m_currentRateUnit)); // 设置当前速率单位
	m_rRateUnitCombo->setEditable(true);
	m_rRateUnitCombo->lineEdit()->setAlignment(Qt::AlignCenter);
	m_rRateUnitCombo->lineEdit()->setReadOnly(true);
	m_rRateUnitCombo->setStyleSheet(
		"QComboBox { border: none; background: transparent; padding-left: 4px; }"
		"QComboBox::drop-down { border: none; }"
		);
	m_rateTableWidget->setCellWidget(0, 1, m_rRateUnitCombo);

	layout->addWidget(m_rateTableWidget);
	return root;
}

QWidget* nmWxForecast::buildExtRampPage()
{
	QWidget *root = new QWidget(this);
	root->setContentsMargins(0, 0, 0, 0);

	QVBoxLayout *layout = new QVBoxLayout(root);
	layout->setContentsMargins(0, 0, 0, 0);
	layout->setSpacing(8);  // 与基础区一致

	// Producing pressure at end
	m_producingPressureEndComponent = new nmGUIComponentLineEdit(
		&m_forecastData.getDecliningPressureData().getProducingPressureEnd(),
		true,
		root
		);
	layout->addWidget(m_producingPressureEndComponent);

	// Pressure change period
	m_pressureChangePeriodComponent = new nmGUIComponentLineEdit(
		&m_forecastData.getDecliningPressureData().getPressureChangePeriod(),
		true,
		root
		);
	layout->addWidget(m_pressureChangePeriodComponent);

	layout->addStretch();  // 底部弹性空间

	root->setMinimumHeight(80);
	return root;
}

void nmWxForecast::setupConnections()
{
	// Forecast option connections
	connect(m_constantPressureRadio,  SIGNAL(clicked()), this, SLOT(onConstantPressureSelected()));
	connect(m_decliningPressureRadio, SIGNAL(clicked()), this, SLOT(onDecliningPressureSelected()));
	connect(m_multiplePressuresRadio, SIGNAL(clicked()), this, SLOT(onMultiplePressuresSelected()));

	connect(m_multipleRatesRadio,     SIGNAL(clicked()), this, SLOT(onMultipleRatesSelected())); 

	connect(m_usePastHistoryCheck,   SIGNAL(toggled(bool)), this, SLOT(onUsePastHistoryToggled(bool)));
	connect(m_surfacePressuresCheck, SIGNAL(toggled(bool)), this, SLOT(onSurfacePressuresToggled(bool)));

	// 复选框联动
	connect(m_abandonmentRateCheck, SIGNAL(toggled(bool)), this, SLOT(onAbandonmentRateCheckToggled(bool)));
	connect(m_maximumRateCheck, SIGNAL(toggled(bool)), this, SLOT(onMaximumRateCheckToggled(bool)));

	// Buttons
	connect(m_loadDataButton, SIGNAL(clicked()), this, SLOT(onLoadDataClicked()));
	connect(m_generateButton, SIGNAL(clicked()), this, SLOT(onGenerateClicked()));
	connect(m_cancelButton,   SIGNAL(clicked()), this, SLOT(onCancelClicked()));

	// Pressure Table
	if(m_pressureTableWidget) {
		connect(m_pressureTableWidget, SIGNAL(cellChanged(int, int)), this, SLOT(onPressureCellChanged(int, int)));
	}
	if(m_pDurationUnitCombo) {
		connect(m_pDurationUnitCombo, SIGNAL(currentIndexChanged(const QString &)),
			this, SLOT(onSharedDurationUnitChanged(const QString &)));
	}
	if(m_pPressureUnitCombo) {
		connect(m_pPressureUnitCombo, SIGNAL(currentIndexChanged(const QString &)),
			this, SLOT(onPressureUnitChanged(const QString &)));
	}

	// Rate Table Connections
	if(m_rateTableWidget) {
		connect(m_rateTableWidget, SIGNAL(cellChanged(int, int)), this, SLOT(onRateCellChanged(int, int)));
	}
	if(m_rDurationUnitCombo) {
		connect(m_rDurationUnitCombo, SIGNAL(currentIndexChanged(const QString &)),
			this, SLOT(onSharedDurationUnitChanged(const QString &)));
	}
	if(m_rRateUnitCombo) {
		connect(m_rRateUnitCombo, SIGNAL(currentIndexChanged(const QString &)),
			this, SLOT(onRateUnitChanged(const QString &)));
	}
}

void nmWxForecast::onAbandonmentRateCheckToggled(bool checked)
{
	if(m_abandonmentRateComponent) {
		m_abandonmentRateComponent->setEnabled(checked);
	}

	// 同步到数据模型
	nmDataForecast::ForecastOption option = m_forecastData.getForecastOption(); // Get current option

	if(option == nmDataForecast::ConstantPressureOption) {
		m_forecastData.getConstantPressureData().setIsAbandonmentRate(checked);
	} else if(option == nmDataForecast::DecliningPressureOption) {
		m_forecastData.getDecliningPressureData().setIsAbandonmentRate(checked);
	} else if(option == nmDataForecast::MultiplePressuresOption) {
		m_forecastData.getMultiplePressuresData().setIsAbandonmentRate(checked);
	}
}

void nmWxForecast::onMaximumRateCheckToggled(bool checked)
{
	if(m_maximumRateComponent) {
		m_maximumRateComponent->setEnabled(checked);
	}

	// 同步到数据模型
	nmDataForecast::ForecastOption option = m_forecastData.getForecastOption(); // Get current option

	if(option == nmDataForecast::ConstantPressureOption) {
		m_forecastData.getConstantPressureData().setIsMaximumRate(checked);
	} else if(option == nmDataForecast::DecliningPressureOption) {
		m_forecastData.getDecliningPressureData().setIsMaximumRate(checked);
	} else if(option == nmDataForecast::MultiplePressuresOption) {
		m_forecastData.getMultiplePressuresData().setIsMaximumRate(checked);
	}
}

void nmWxForecast::onConstantPressureSelected()
{
	updateDataFromUI();  // 保存当前界面数据
	m_forecastData.setForecastOption(nmDataForecast::ConstantPressureOption);
	updateParametersForOption();
}

void nmWxForecast::onDecliningPressureSelected()
{
	updateDataFromUI();  // 保存当前界面数据
	m_forecastData.setForecastOption(nmDataForecast::DecliningPressureOption);
	updateParametersForOption();
}

void nmWxForecast::onMultiplePressuresSelected()
{
	updateDataFromUI();  // 保存当前界面数据
	m_forecastData.setForecastOption(nmDataForecast::MultiplePressuresOption);
	updateParametersForOption();
}

void nmWxForecast::onMultipleRatesSelected()
{
	updateDataFromUI();  // 保存当前界面数据
	m_forecastData.setForecastOption(nmDataForecast::MultipleRatesOption);
	updateParametersForOption();
}

void nmWxForecast::onUsePastHistoryToggled(bool checked)
{
	Q_UNUSED(checked);
}

void nmWxForecast::onSurfacePressuresToggled(bool checked)
{
	Q_UNUSED(checked);
}


void nmWxForecast::updateParametersForOption()
{
	this->setUpdatesEnabled(false);

	const nmDataForecast::ForecastOption option = m_forecastData.getForecastOption();

	// 默认显示所有基本组件
	if (m_abandonmentRateCheck) m_abandonmentRateCheck->setVisible(true); 
	if (m_abandonmentStack) m_abandonmentStack->setCurrentIndex(0);
	if (m_maximumRateCheck) m_maximumRateCheck->setVisible(true);       
	if (m_maximumStack) m_maximumStack->setCurrentIndex(0);            

	if (m_forecastDurationComponent) m_forecastDurationComponent->setVisible(true);
	if (m_producingPressureComponent) m_producingPressureComponent->setVisible(true);

	// 更新各组件的数据源指针并控制显示
	if(option == nmDataForecast::ConstantPressureOption) {
		ConstantPressure& cpData = m_forecastData.getConstantPressureData();

		if(m_initialPressureComponent)
			m_initialPressureComponent->setOriginValue(&cpData.getInitialPressure());
		if(m_abandonmentRateComponent)
			m_abandonmentRateComponent->setOriginValue(&cpData.getAbandonmentRate());
		if(m_maximumRateComponent)
			m_maximumRateComponent->setOriginValue(&cpData.getMaximumRate());
		if(m_forecastDurationComponent)
			m_forecastDurationComponent->setOriginValue(&cpData.getForecastDuration());
		if(m_producingPressureComponent)
			m_producingPressureComponent->setOriginValue(&cpData.getProducingPressure());
		if (m_extStackedWidget) m_extStackedWidget->setCurrentWidget(m_extEmpty);

	} else if(option == nmDataForecast::DecliningPressureOption) {
		DecliningPressure& dpData = m_forecastData.getDecliningPressureData();

		if(m_initialPressureComponent)
			m_initialPressureComponent->setOriginValue(&dpData.getInitialPressure());
		if(m_abandonmentRateComponent)
			m_abandonmentRateComponent->setOriginValue(&dpData.getAbandonmentRate());
		if(m_maximumRateComponent)
			m_maximumRateComponent->setOriginValue(&dpData.getMaximumRate());
		if(m_forecastDurationComponent)
			m_forecastDurationComponent->setOriginValue(&dpData.getForecastDuration());
		if(m_producingPressureComponent)
			m_producingPressureComponent->setOriginValue(&dpData.getProducingPressureStart());

		if (m_extStackedWidget) m_extStackedWidget->setCurrentWidget(m_extRamp);

	} else if(option == nmDataForecast::MultiplePressuresOption) {
		MultiplePressures& mpData = m_forecastData.getMultiplePressuresData();

		if(m_initialPressureComponent)
			m_initialPressureComponent->setOriginValue(&mpData.getInitialPressure());
		if(m_abandonmentRateComponent)
			m_abandonmentRateComponent->setOriginValue(&mpData.getAbandonmentRate());
		if(m_maximumRateComponent)
			m_maximumRateComponent->setOriginValue(&mpData.getMaximumRate());

		if(m_abandonmentStack) m_abandonmentStack->setCurrentIndex(0);
		if(m_maximumStack) m_maximumStack->setCurrentIndex(0);

		// 隐藏"Duration"和"Pressure"输入框
		if(m_forecastDurationComponent)
			m_forecastDurationComponent->setVisible(false);
		if(m_producingPressureComponent)
			m_producingPressureComponent->setVisible(false);

		if (m_extStackedWidget) m_extStackedWidget->setCurrentWidget(m_extMultiP);

	} else if(option == nmDataForecast::MultipleRatesOption) {
		MultipleRates& mrData = m_forecastData.getMultipleRatesData();

		if(m_initialPressureComponent)
			m_initialPressureComponent->setOriginValue(&mrData.getInitialPressure());

		if (m_abandonmentRateCheck) m_abandonmentRateCheck->setVisible(false);
		if (m_abandonmentStack) m_abandonmentStack->setCurrentIndex(1);      

		if (m_maximumRateCheck) m_maximumRateCheck->setVisible(false);
		if (m_maximumStack) m_maximumStack->setCurrentIndex(1);            

		if (m_forecastDurationComponent) m_forecastDurationComponent->setVisible(false);
		if (m_producingPressureComponent) m_producingPressureComponent->setVisible(false);

		if (m_extStackedWidget) m_extStackedWidget->setCurrentWidget(m_extMultiR);
	}

	// 更新界面显示
	updateUIFromData();

	this->setUpdatesEnabled(true);
	this->update(); 
}


void nmWxForecast::updateUIFromData()
{
	const nmDataForecast::ForecastOption option = m_forecastData.getForecastOption();

	// 更新复选框状态
	// 更新复选框状态
	if(option == nmDataForecast::ConstantPressureOption) {
		const ConstantPressure& cpData = m_forecastData.getConstantPressureData();

		bool isAbandoned = cpData.getIsAbandonmentRate();
		bool isMaxRate = cpData.getIsMaximumRate();

		m_abandonmentRateCheck->setChecked(isAbandoned);
		m_maximumRateCheck->setChecked(isMaxRate);

		// 手动设置初始状态
		if (m_abandonmentRateComponent) m_abandonmentRateComponent->setEnabled(isAbandoned);
		if (m_maximumRateComponent) m_maximumRateComponent->setEnabled(isMaxRate);

	} else if(option == nmDataForecast::DecliningPressureOption) {
		const DecliningPressure& dpData = m_forecastData.getDecliningPressureData();

		bool isAbandoned = dpData.getIsAbandonmentRate();
		bool isMaxRate = dpData.getIsMaximumRate();

		m_abandonmentRateCheck->setChecked(isAbandoned);
		m_maximumRateCheck->setChecked(isMaxRate);

		// 手动设置初始状态
		if (m_abandonmentRateComponent) m_abandonmentRateComponent->setEnabled(isAbandoned);
		if (m_maximumRateComponent) m_maximumRateComponent->setEnabled(isMaxRate);

	} else if(option == nmDataForecast::MultiplePressuresOption) {
		const MultiplePressures& mpData = m_forecastData.getMultiplePressuresData();

		bool isAbandoned = mpData.getIsAbandonmentRate();
		bool isMaxRate = mpData.getIsMaximumRate();

		m_abandonmentRateCheck->setChecked(isAbandoned);
		m_maximumRateCheck->setChecked(isMaxRate);

		// 手动设置初始状态
		if (m_abandonmentRateComponent) m_abandonmentRateComponent->setEnabled(isAbandoned);
		if (m_maximumRateComponent) m_maximumRateComponent->setEnabled(isMaxRate);
	}

	// 刷新所有组件的显示值
	if(m_initialPressureComponent)
		m_initialPressureComponent->updateValueFromOrigin();

	if(m_abandonmentRateComponent)
		m_abandonmentRateComponent->updateValueFromOrigin();

	if(m_maximumRateComponent)
		m_maximumRateComponent->updateValueFromOrigin();

	if(m_forecastDurationComponent)
		m_forecastDurationComponent->updateValueFromOrigin();

	if(m_producingPressureComponent)
		m_producingPressureComponent->updateValueFromOrigin();

	if(option == nmDataForecast::DecliningPressureOption) {
		if(m_producingPressureEndComponent)
			m_producingPressureEndComponent->updateValueFromOrigin();

		if(m_pressureChangePeriodComponent)
			m_pressureChangePeriodComponent->updateValueFromOrigin();
	} else if(option == nmDataForecast::MultiplePressuresOption) {

		// 填充压力表格
		if(m_pressureTableWidget) {
			m_pressureTableWidget->blockSignals(true);

			if(m_pDurationUnitCombo) m_pDurationUnitCombo->blockSignals(true);

			if(m_pPressureUnitCombo) m_pPressureUnitCombo->blockSignals(true);

			// 清空数据行 (保留第0行单位行)
			while(m_pressureTableWidget->rowCount() > 1) {
				m_pressureTableWidget->removeRow(1);
			}

			const QVector<PressureRow>& tableData = m_forecastData.getMultiplePressuresData().getPressureTable();
			PressureRow tempDefaults; // 用于获取单位列表和默认值

			int dataSize = tableData.size();
			// 如果数据为空，至少显示1行（使用默认值），否则显示所有数据
			int displayRowCount = (dataSize == 0) ? 1 : dataSize;

			m_pressureTableWidget->setRowCount(1 + displayRowCount + 1);

			if(m_pDurationUnitCombo) m_pDurationUnitCombo->setCurrentIndex(m_pDurationUnitCombo->findText(m_currentDurationUnit));

			if(m_pPressureUnitCombo) m_pPressureUnitCombo->setCurrentIndex(m_pPressureUnitCombo->findText(m_currentPressureUnit));

			for(int i = 0; i < displayRowCount; ++i) {
				// 如果i < dataSize，使用加载的数据；否则 (即 dataSize==0) 使用默认值
				const PressureRow& rowData = (i < dataSize) ? tableData.at(i) : tempDefaults;

				int tableRow = i + 1;

				// 转换值：从 "数据的基础单位" 转换为 "当前显示的单位"
				double baseDurValue = rowData.duration.getValue().toDouble();
				QString baseDurUnit = rowData.duration.getUnit();
				double displayDurValue = tempDefaults.duration.convertValueByUnitType(baseDurValue, baseDurUnit, m_currentDurationUnit);

				double basePresValue = rowData.pressure.getValue().toDouble();
				QString basePresUnit = rowData.pressure.getUnit();
				double displayPresValue = tempDefaults.pressure.convertValueByUnitType(basePresValue, basePresUnit, m_currentPressureUnit);

				QTableWidgetItem* durationItem = new QTableWidgetItem(QString::number(displayDurValue));
				durationItem->setTextAlignment(Qt::AlignCenter);
				m_pressureTableWidget->setItem(tableRow, 0, durationItem);

				QTableWidgetItem* pressureItem = new QTableWidgetItem(QString::number(displayPresValue));
				pressureItem->setTextAlignment(Qt::AlignCenter);
				m_pressureTableWidget->setItem(tableRow, 1, pressureItem);
			}

			if (m_pDurationUnitCombo) m_pDurationUnitCombo->blockSignals(false);
			if (m_pPressureUnitCombo) m_pPressureUnitCombo->blockSignals(false);
			m_pressureTableWidget->blockSignals(false);
		}
	}
	else if(option == nmDataForecast::MultipleRatesOption) {

		// 填充速率表格
		if(m_rateTableWidget) {
			// 锁定信号
			m_rateTableWidget->blockSignals(true);
			if(m_rDurationUnitCombo) m_rDurationUnitCombo->blockSignals(true);
			if(m_rRateUnitCombo) m_rRateUnitCombo->blockSignals(true);

			// 清空数据行 (保留第0行单位行)
			while(m_rateTableWidget->rowCount() > 1) {
				m_rateTableWidget->removeRow(1);
			}

			const QVector<FlowRow>& tableData = m_forecastData.getMultipleRatesData().getFlowTable();
			FlowRow tempDefaults; // 用于获取单位列表和默认值

			int dataSize = tableData.size();
			int displayRowCount = (dataSize == 0) ? 1 : dataSize;

			// 设置行数： 1(单位) + N(数据) + 1(空白)
			m_rateTableWidget->setRowCount(1 + displayRowCount + 1);

			// 设置下拉框为当前单位
			if(m_rDurationUnitCombo) m_rDurationUnitCombo->setCurrentIndex(m_rDurationUnitCombo->findText(m_currentDurationUnit));
			if(m_rRateUnitCombo) m_rRateUnitCombo->setCurrentIndex(m_rRateUnitCombo->findText(m_currentRateUnit));

			for(int i = 0; i < displayRowCount; ++i) {
				// 如果i < dataSize，使用加载的数据；否则 (即 dataSize==0) 使用默认值
				const FlowRow& rowData = (i < dataSize) ? tableData.at(i) : tempDefaults;

				int tableRow = i + 1;

				// 转换值：从 "数据的基础单位" 转换为 "当前显示的单位"
				double baseDurValue = rowData.duration.getValue().toDouble();
				QString baseDurUnit = rowData.duration.getUnit();
				double displayDurValue = tempDefaults.duration.convertValueByUnitType(baseDurValue, baseDurUnit, m_currentDurationUnit);

				double baseRateValue = rowData.q0.getValue().toDouble();
				QString baseRateUnit = rowData.q0.getUnit();
				double displayRateValue = tempDefaults.q0.convertValueByUnitType(baseRateValue, baseRateUnit, m_currentRateUnit);

				QTableWidgetItem* durationItem = new QTableWidgetItem(QString::number(displayDurValue));
				durationItem->setTextAlignment(Qt::AlignCenter);
				m_rateTableWidget->setItem(tableRow, 0, durationItem);

				QTableWidgetItem* rateItem = new QTableWidgetItem(QString::number(displayRateValue));
				rateItem->setTextAlignment(Qt::AlignCenter);
				m_rateTableWidget->setItem(tableRow, 1, rateItem);
			}

			// 解锁信号
			if (m_rDurationUnitCombo) m_rDurationUnitCombo->blockSignals(false);
			if (m_rRateUnitCombo) m_rRateUnitCombo->blockSignals(false);
			m_rateTableWidget->blockSignals(false);
		}
	}
}

void nmWxForecast::updateDataFromUI()
{
	// 将界面数据写回到数据模型
	if(m_initialPressureComponent)
		m_initialPressureComponent->updateValueToOrigin();

	if(m_abandonmentRateComponent)
		m_abandonmentRateComponent->updateValueToOrigin();

	if(m_maximumRateComponent)
		m_maximumRateComponent->updateValueToOrigin();

	if(m_forecastDurationComponent)
		m_forecastDurationComponent->updateValueToOrigin();

	if(m_producingPressureComponent)
		m_producingPressureComponent->updateValueToOrigin();

	const nmDataForecast::ForecastOption option = m_forecastData.getForecastOption();

	if(option == nmDataForecast::DecliningPressureOption) {
		if(m_producingPressureEndComponent)
			m_producingPressureEndComponent->updateValueToOrigin();

		if(m_pressureChangePeriodComponent)
			m_pressureChangePeriodComponent->updateValueToOrigin();
	}  else if(option == nmDataForecast::MultiplePressuresOption) {

		// 从表格保存数据
		if(m_pressureTableWidget) {
			QVector<PressureRow>& tableData = m_forecastData.getMultiplePressuresData().getPressureTable();
			tableData.clear();

			PressureRow tempDefaults;
			QString baseDurUnit = tempDefaults.duration.getUnit();
			QString basePresUnit = tempDefaults.pressure.getUnit();

			// 循环到 rowCount() - 1 来跳过最后那个空白行
			for(int i = 1; i < m_pressureTableWidget->rowCount() - 1; ++i) {
				QTableWidgetItem* durationItem = m_pressureTableWidget->item(i, 0);
				QTableWidgetItem* pressureItem = m_pressureTableWidget->item(i, 1);

				bool durationEmpty = (durationItem == NULL || durationItem->text().trimmed().isEmpty());
				bool pressureEmpty = (pressureItem == NULL || pressureItem->text().trimmed().isEmpty());

				if(durationEmpty && pressureEmpty) {
					continue;
				}

				PressureRow newRow; // newRow 包含基础单位 (hr, psia)

				if(!durationEmpty) {
					double displayVal = durationItem->text().toDouble();
					// 转换值：从 "当前显示的单位" 转换回 "数据的基础单位"
					double storageVal = tempDefaults.duration.convertValueByUnitType(displayVal, m_currentDurationUnit, baseDurUnit);
					newRow.duration.setValue(storageVal);
				}

				if(!pressureEmpty) {
					double displayVal = pressureItem->text().toDouble();
					double storageVal = tempDefaults.pressure.convertValueByUnitType(displayVal, m_currentPressureUnit, basePresUnit);
					newRow.pressure.setValue(storageVal);
				}

				tableData.append(newRow);
			}
		}
	}
	else if (option == nmDataForecast::MultipleRatesOption) {

		// 从速率表格保存数据
		if(m_rateTableWidget) {
			// 获取数据模型的引用
			QVector<FlowRow>& tableData = m_forecastData.getMultipleRatesData().getFlowTable();
			tableData.clear();

			FlowRow tempDefaults;
			// 获取数据模型的基础单位
			QString baseDurUnit = tempDefaults.duration.getUnit();
			QString baseRateUnit = tempDefaults.q0.getUnit();

			// 循环到 rowCount() - 1 来跳过最后那个空白行
			for(int i = 1; i < m_rateTableWidget->rowCount() - 1; ++i) { 
				QTableWidgetItem* durationItem = m_rateTableWidget->item(i, 0);
				QTableWidgetItem* rateItem = m_rateTableWidget->item(i, 1);

				bool durationEmpty = (durationItem == NULL || durationItem->text().trimmed().isEmpty());
				bool rateEmpty = (rateItem == NULL || rateItem->text().trimmed().isEmpty());

				// 如果两个单元格都为空，则跳过该行
				if(durationEmpty && rateEmpty) {
					continue;
				}

				FlowRow newRow; // newRow 将使用基础单位

				if(!durationEmpty) {
					double displayVal = durationItem->text().toDouble();
					// 转换值：从 "当前显示的单位" 转换回 "数据的基础单位"
					double storageVal = tempDefaults.duration.convertValueByUnitType(displayVal, m_currentDurationUnit, baseDurUnit);
					newRow.duration.setValue(storageVal);
				}
				if(!rateEmpty) {
					double displayVal = rateItem->text().toDouble();
					double storageVal = tempDefaults.q0.convertValueByUnitType(displayVal, m_currentRateUnit, baseRateUnit);
					newRow.q0.setValue(storageVal);
				}
				tableData.append(newRow);
			}
		}
	}
}

void nmWxForecast::onLoadDataClicked()
{
	// TODO: Implement load data functionality
}

void nmWxForecast::onGenerateClicked()
{
	// 确保最新的界面数据写回到模型
	updateDataFromUI();

	// 保存数据到数据中心
	saveDataToManager();

	// TODO: 使用数据中心的数据进行预测计算

	accept();
}

void nmWxForecast::onCancelClicked()
{
	reject();
}

void nmWxForecast::onPressureCellChanged(int row, int column)
{
	Q_UNUSED(column);
	if (!m_pressureTableWidget) return;
	if (row == 0) return; // 忽略单位行

	// 让被编辑行的两列都居中
	QTableWidgetItem* it0 = m_pressureTableWidget->item(row, 0);
	if (it0) it0->setTextAlignment(Qt::AlignCenter);
	QTableWidgetItem* it1 = m_pressureTableWidget->item(row, 1);
	if (it1) it1->setTextAlignment(Qt::AlignCenter);

	// 如果编辑的是最后一行，追加一个新的空白行，并预置居中 item
	int lastRow = m_pressureTableWidget->rowCount() - 1;
	if (row == lastRow) {
		m_pressureTableWidget->blockSignals(true);

		int newRow = m_pressureTableWidget->rowCount();
		m_pressureTableWidget->insertRow(newRow);

		// 给新行两列预置空 item，这样用户一输入就居中
		m_pressureTableWidget->setItem(newRow, 0, makeCenteredEmptyItem());
		m_pressureTableWidget->setItem(newRow, 1, makeCenteredEmptyItem());

		m_pressureTableWidget->blockSignals(false);
	}
}


void nmWxForecast::onPressureUnitChanged(const QString& unit)
{
	if(unit == m_currentPressureUnit) return;  // 单位没变

	QString oldUnit = m_currentPressureUnit;
	m_currentPressureUnit = unit;

	// 锁定信号
	m_pressureTableWidget->blockSignals(true);

	PressureRow tempDefaults; // 用于获取转换函数

	// 遍历所有数据行 (从 1 到 rowCount - 2)
	for(int i = 1; i < m_pressureTableWidget->rowCount() - 1; ++i) {
		QTableWidgetItem* dataItem = m_pressureTableWidget->item(i, 1); // 第1列

		if(dataItem && !dataItem->text().isEmpty()) {

			double oldDisplayValue = dataItem->text().toDouble();
			double newDisplayValue = tempDefaults.pressure.convertValueByUnitType(oldDisplayValue, oldUnit, unit);
			dataItem->setText(QString::number(newDisplayValue));
		}
	}

	// 解锁信号
	m_pressureTableWidget->blockSignals(false);
}

void nmWxForecast::onRateCellChanged(int row, int column)
{
	Q_UNUSED(column);
	if (!m_rateTableWidget) return;
	if (row == 0) return; // 忽略单位行

	// 让被编辑行的两列都居中
	QTableWidgetItem* it0 = m_rateTableWidget->item(row, 0);
	if (it0) it0->setTextAlignment(Qt::AlignCenter);
	QTableWidgetItem* it1 = m_rateTableWidget->item(row, 1);
	if (it1) it1->setTextAlignment(Qt::AlignCenter);

	// 若编辑的是最后一行，则在末尾追加一个新的空白行，并预置居中 item
	int lastRow = m_rateTableWidget->rowCount() - 1;
	if (row == lastRow) {
		m_rateTableWidget->blockSignals(true);

		int newRow = m_rateTableWidget->rowCount();
		m_rateTableWidget->insertRow(newRow);

		m_rateTableWidget->setItem(newRow, 0, makeCenteredEmptyItem());
		m_rateTableWidget->setItem(newRow, 1, makeCenteredEmptyItem());

		m_rateTableWidget->blockSignals(false);
	}
}

void nmWxForecast::onSharedDurationUnitChanged(const QString& unit)
{
	// 检查单位是否真的改变了
	if(unit.isEmpty() || unit == m_currentDurationUnit) return;

	QString oldUnit = m_currentDurationUnit;
	m_currentDurationUnit = unit; // 更新全局的当前单位

	// --- 1. 更新 Pressure 表格 ---
	if(m_pressureTableWidget) {
		// 锁定信号，防止在setText时触发 cellChanged
		m_pressureTableWidget->blockSignals(true);
		PressureRow tempDefaults; // 用于获取转换函数

		// 遍历所有数据行 (从 1 到 rowCount - 2，跳过单位行和最后空白行)
		for(int i = 1; i < m_pressureTableWidget->rowCount() - 1; ++i) {
			QTableWidgetItem* dataItem = m_pressureTableWidget->item(i, 0); // 第0列 (Duration)

			if(dataItem && !dataItem->text().isEmpty()) {
				double oldDisplayValue = dataItem->text().toDouble();
				// 转换值
				double newDisplayValue = tempDefaults.duration.convertValueByUnitType(oldDisplayValue, oldUnit, unit);
				dataItem->setText(QString::number(newDisplayValue));
			}
		}
		m_pressureTableWidget->blockSignals(false);
	}

	// --- 2. 更新 Rate 表格 ---
	if(m_rateTableWidget) {
		// 锁定信号
		m_rateTableWidget->blockSignals(true);
		FlowRow tempDefaults; // 用于获取转换函数

		// 遍历所有数据行
		for(int i = 1; i < m_rateTableWidget->rowCount() - 1; ++i) {
			QTableWidgetItem* dataItem = m_rateTableWidget->item(i, 0); // 第0列 (Duration)

			if(dataItem && !dataItem->text().isEmpty()) {
				double oldDisplayValue = dataItem->text().toDouble();
				// 转换值
				double newDisplayValue = tempDefaults.duration.convertValueByUnitType(oldDisplayValue, oldUnit, unit);
				dataItem->setText(QString::number(newDisplayValue));
			}
		}
		m_rateTableWidget->blockSignals(false);
	}

	if(m_pDurationUnitCombo) {
		m_pDurationUnitCombo->blockSignals(true);
		m_pDurationUnitCombo->setCurrentIndex(m_pDurationUnitCombo->findText(unit));
		m_pDurationUnitCombo->blockSignals(false);
	}

	if(m_rDurationUnitCombo) {
		m_rDurationUnitCombo->blockSignals(true);
		m_rDurationUnitCombo->setCurrentIndex(m_rDurationUnitCombo->findText(unit));
		m_rDurationUnitCombo->blockSignals(false);
	}
}

void nmWxForecast::onRateUnitChanged(const QString& unit)
{
	if(unit == m_currentRateUnit) return;  // 单位没变

	QString oldUnit = m_currentRateUnit;
	m_currentRateUnit = unit;

	// 锁定信号
	m_rateTableWidget->blockSignals(true);

	FlowRow tempDefaults; // 用于获取转换函数

	// 遍历所有数据行 (从 1 到 rowCount - 2)
	for(int i = 1; i < m_rateTableWidget->rowCount() - 1; ++i) {
		QTableWidgetItem* dataItem = m_rateTableWidget->item(i, 1); // 第1列

		if(dataItem && !dataItem->text().isEmpty()) {
			double oldDisplayValue = dataItem->text().toDouble();
			// 使用 q0 (FlowRate) 进行单位转换
			double newDisplayValue = tempDefaults.q0.convertValueByUnitType(oldDisplayValue, oldUnit, unit);
			dataItem->setText(QString::number(newDisplayValue));
		}
	}

	// 解锁信号
	m_rateTableWidget->blockSignals(false);
}