fix(Nm): 统一UTM坐标换算并修复模型位置刷新

- 提取独立投影工具,供模型参考点和模型位置窗口共用
- 替换经纬度近似计算,按参考点投影带反算鼠标位置
- 参考点更新或重新载入后立即刷新,并保留单位选择
- 完善无效坐标处理,补充接口与成员变量中文注释
feature/Dialog-Unification-20261106
lh 3 days ago
parent d2d0460c20
commit f2bfc42d4e

@ -408,10 +408,13 @@ public:
void setMeasureData(nmDataMeasure *pMeasureData);
bool removeMeasureData();
// 模型参考点相关
// 重建空参考点并通知位置显示刷新;返回对象由本 Manager 持有。
nmDataGeoRef* createGeoRefData();
// 借用当前参考点,尚未设置时为空;调用方不得释放或跨重建缓存该指针。
nmDataGeoRef* getGeoRefData() const;
// 返回参考点编辑副本;尚未设置时返回默认空对象,不创建真实工程数据。
nmDataGeoRef getGeoRefDataCopy() const;
// 完整替换参考点后通知位置显示刷新;坐标更新不改变求解物性或网格输入版本。
void updateGeoRefData(const nmDataGeoRef& newData);
// 预测相关
@ -802,6 +805,8 @@ public:
void sigWellRemoved(QString wellCode, QString wellName);
/// @brief 参数面板中的对象列表或对象名称发生变化
void sigGeometryListChanged();
/** @brief 模型参考点已完整更新、重建或随工程替换;接收方需重新读取当前对象。 */
void sigGeoReferenceChanged();
/** @brief 当前分析最后一次排队的 PEBI 建网流程已经结束。 */
void sigPebiGridGenerationFinished(quint64 nGridInputRevision,
bool bSucceeded);

@ -0,0 +1,46 @@
#ifndef NMUTMPROJECTION_H
#define NMUTMPROJECTION_H
#include "nmData_global.h"
#include <QString>
// WGS84/UTM 坐标工具,不依赖 QWidget、分析管理器或当前工程。
// 经纬度统一使用十进制度,投影坐标统一使用米;显示单位由调用方交给框架换算。
namespace nmUtmProjection
{
// 检查有限经纬度及 UTM 覆盖范围:纬度 [-80, 84],经度 [-180, 180]。
NM_DATA_EXPORT bool isValidGeographic(double dLatitude, double dLongitude);
// 检查有限米制坐标及基本范围:东向 [0, 1000000],北向 [0, 10000000]。
// 此检查不能代替反投影后的纬度范围检查。
NM_DATA_EXPORT bool isValidProjected(double dEasting, double dNorthing);
// 解析两位经度带号和纬度带字母(如 50S);S 是纬度带,不表示南半球。
// 排除 32X/34X/36X 等不存在的自然分带;失败时调用方不得使用输出参数。
NM_DATA_EXPORT bool parseZone(const QString& sZone, int& nZone, char& cBand);
// 将合法纬度(度)转换为 C~X 纬度带;纬度无效时返回 0,X 带包含北纬 84 度。
NM_DATA_EXPORT char latitudeBand(double dLatitude);
// 格式化带号和字母,不改变投影坐标;基本字符或数值不合法时返回空串。
// 是否属于有效自然分带仍由 parseZone 检查。
NM_DATA_EXPORT QString zoneText(int nZone, char cBand);
// 正投影:输入纬度/经度(度),输出自然分带和东向/北向(米)。
// 包含 Norway/Svalbard 特殊带宽及 +/-180 度边界;失败时不要使用输出参数。
NM_DATA_EXPORT bool geographicToUtm(double dLatitude, double dLongitude, QString& sZone,
double& dEasting, double& dNorthing);
// 反投影:按指定经度带及字母对应的半球解释米制坐标,输出纬度/经度(度)。
// 不按反算位置自动换成相邻自然带:模型偏移坐标必须继续使用参考点的投影带。
// 字母用于确定假北值,不限制结果仍处于原 8 度纬度带;超出半球/UTM 范围返回 false。
// 失败时不要使用输出参数,调用方应清空派生经纬度,避免保留上一次结果。
NM_DATA_EXPORT bool utmToGeographic(int nZone, char cBand, double dEasting, double dNorthing,
double& dLatitude, double& dLongitude);
// 返回有效自然分带覆盖区域的中心经纬度(度),供用户主动选带时初始化参考点。
// 特殊宽窄带使用覆盖区域中心;无效分带返回 false,不产生默认坐标。
NM_DATA_EXPORT bool zoneCenter(int nZone, char cBand, double& dLatitude, double& dLongitude);
}
#endif // NMUTMPROJECTION_H

@ -14,7 +14,8 @@ class nmDataAnalyzeManager;
/**
* @brief 模型位置显示窗口,跟随所属画布的鼠标位置更新坐标,不修改分析数据。
* @note 本地 X/Y 和东向、北向坐标以米接收,由框架单位绑定器负责显示换算。
* 坐标均可选中复制;UTM 带只展示当前参考点的设置,不提供编辑入口。
* 经纬度由参考点 UTM 坐标加本地偏移后统一反投影,不混用旧工程中独立保存的经纬度。
* 坐标均可选中复制;UTM 带展示参考点的投影设置,跨自然分带时仍使用该带解释平面坐标。
* 输入列与单位列按 8:5 横向伸展,纵向采用字体和主题的推荐高度。
*/
class NM_SUB_WXS_EXPORT nmWxPointerPosDlg : public iDlgBase
@ -29,6 +30,13 @@ public slots:
/** @brief 接收画布的米制坐标,刷新显示并保留各字段已选择的单位。 */
void setPointerPos(double x, double y);
private slots:
/** @brief 参考点变更后按最近的米制鼠标位置重算,无需等待下一次鼠标移动。 */
void refreshCoordinates();
/** @brief 所属分析销毁时解除弱引用并清空显示,避免停留在已关闭分析的坐标上。 */
void onDataManagerDestroyed();
private:
/** @brief 四个长度字段分别保存单位选择,不混用本地坐标与地理坐标。 */
enum LengthField
@ -60,16 +68,18 @@ private:
// 借用所属分析的管理器,删除时自动置空,不使用全局当前分析。
// 参考点可能在窗口打开后新增、清空或重建,每次刷新重新读取,不缓存其裸指针。
QPointer<nmDataAnalyzeManager> m_pDataManager;
double m_dLastLocalX; // 最近收到的本地 X,单位 m;保存 NaN/无穷值以维持无效位置的清空状态。
double m_dLastLocalY; // 最近收到的本地 Y,单位 m;参考点刷新只使用原值,不反读已换单位的文本。
// 长度控件均由 Qt 父子关系释放;绑定状态独立记录,禁止以错误单位展示原始值。
QLineEdit* m_pLengthEdits[LengthFieldCount];
QComboBox* m_pLengthUnits[LengthFieldCount];
bool m_bUnitsBound[LengthFieldCount];
QLineEdit* m_pLengthEdits[LengthFieldCount]; // 本地 X/Y 与东向/北向坐标的只读输入框。
QComboBox* m_pLengthUnits[LengthFieldCount]; // 各字段独立的框架长度单位选择。
bool m_bUnitsBound[LengthFieldCount]; // 单位绑定是否成功,失败时禁止显示未换算值。
// 非长度字段使用普通只读文本框,经纬度文本本身包含度、分、秒符号。
QLineEdit* m_pLonEdit;
QLineEdit* m_pLatEdit;
QLineEdit* m_pUtmZoneEdit;
QLineEdit* m_pLonEdit; // WGS84 经度,按度分秒显示。
QLineEdit* m_pLatEdit; // WGS84 纬度,按度分秒显示。
QLineEdit* m_pUtmZoneEdit; // 解释当前投影坐标所用的参考点分带。
};
#endif // NMWXPOINTERPOSDLG_H

@ -2891,6 +2891,7 @@ nmDataGeoRef* nmDataAnalyzeManager::createGeoRefData()
}
m_pGeoRefData = new nmDataGeoRef;
emit sigGeoReferenceChanged();
return m_pGeoRefData;
}
@ -2915,6 +2916,8 @@ void nmDataAnalyzeManager::updateGeoRefData(const nmDataGeoRef& newData)
}
*m_pGeoRefData = newData; // 调用赋值运算符
// 五个属性全部替换后再通知,已打开的位置窗口立即按最近的鼠标位置刷新。
emit sigGeoReferenceChanged();
}
nmDataForecast* nmDataAnalyzeManager::createForecastData()
@ -6197,6 +6200,7 @@ bool nmDataAnalyzeManager::ReadProjectData(const QString & filePath)
return false;
}
emit sigGeoReferenceChanged();
return true;
}
@ -6958,6 +6962,8 @@ bool nmDataAnalyzeManager::loadNmResult(QString sLoadAnalDir)
swapLoadedProjectState(oLoadedManager);
rebuildLoadedAttributeRegistry();
rebindPebiResultSnapshotToWells();
// 成果发布可能替换或移除参考点,已有位置窗口必须读取发布后的对象。
emit sigGeoReferenceChanged();
emit sigPebiResultSnapshotChanged();
notifyPebiResultStateChangedIfNeeded(oPreviousResultState);
return true;

@ -0,0 +1,171 @@
#include "nmUtmProjection.h"
#include <QtCore/qnumeric.h>
#include <cmath>
namespace nmUtmProjection
{
// WGS84 投影计算只处理度和米,不访问控件、工程对象或显示单位。
const double s_dPi = 3.14159265358979323846;
const double s_dSemiMajor = 6378137.0; // WGS84 长半轴,单位 m。
const double s_dFlattening = 1.0 / 298.257223563;
const double s_dEccentricity2 = 2.0 * s_dFlattening - s_dFlattening * s_dFlattening;
const double s_dScale = 0.9996; // UTM 中央经线比例因子。
const char s_szBands[] = "CDEFGHJKLMNPQRSTUVWX";
// 检查度制经纬度是否有限且位于 WGS84/UTM 支持范围内。
bool isValidGeographic(double dLatitude, double dLongitude)
{
// UTM 仅覆盖南纬 80 度至北纬 84 度;极区需要另一套投影,不能沿用 UTM 公式。
return qIsFinite(dLatitude) && qIsFinite(dLongitude)
&& dLatitude >= -80.0 && dLatitude <= 84.0
&& dLongitude >= -180.0 && dLongitude <= 180.0;
}
// 检查米制投影坐标的基本范围;画布显示范围不参与参考点合法性判断。
bool isValidProjected(double dEasting, double dNorthing)
{
// 检查参考点本身,不随画布缩放范围改变允许输入的坐标范围。
return qIsFinite(dEasting) && qIsFinite(dNorthing)
&& dEasting >= 0.0 && dEasting <= 1000000.0
&& dNorthing >= 0.0 && dNorthing <= 10000000.0;
}
// 解析两位经度带号和一位纬度带字母;失败时输出参数不可用于转换。
bool parseZone(const QString& sZone, int& nZone, char& cBand)
{
bool bNumber = false;
nZone = sZone.left(2).toInt(&bNumber);
if (sZone.size() != 3 || !bNumber || nZone < 1 || nZone > 60
|| sZone.at(0) < QLatin1Char('0') || sZone.at(0) > QLatin1Char('9')
|| sZone.at(1) < QLatin1Char('0') || sZone.at(1) > QLatin1Char('9')) return false;
cBand = sZone.at(2).toLatin1();
if (!QString::fromLatin1(s_szBands).contains(QChar(cBand))) return false;
// Svalbard 的 X 纬度带只有加宽后的奇数分带,32X/34X/36X 不存在。
return cBand != 'X' || (nZone != 32 && nZone != 34 && nZone != 36);
}
// 根据合法的度制纬度确定 C~X 纬度带,跳过 I、O。
char latitudeBand(double dLatitude)
{
if (!isValidGeographic(dLatitude, 0.0)) return 0;
// X 带覆盖 72~84 度,最后一个索引需截断,避免 84 度越界。
const int nBand = qBound(0, static_cast<int>(floor((dLatitude + 80.0) / 8.0)), 19);
return s_szBands[nBand];
}
// 生成与旧工程一致的三字符分带标识,如 01C、50S。
QString zoneText(int nZone, char cBand)
{
if (nZone < 1 || nZone > 60 || !QString::fromLatin1(s_szBands).contains(QChar(cBand)))
return QString();
return QString("%1%2").arg(nZone, 2, 10, QLatin1Char('0')).arg(QChar(cBand));
}
// 按合法的度制经纬度选择自然 UTM 经度带,包含区域特例及日期变更线边界。
static int longitudeZone(double dLatitude, double dLongitude)
{
// +180 度属于第 60 带,不能产生不存在的第 61 带。
int nZone = qBound(1, static_cast<int>(floor((dLongitude + 180.0) / 6.0)) + 1, 60);
// 按 UTM 约定处理 Norway 和 Svalbard 的特殊带宽。
if (dLatitude >= 56.0 && dLatitude < 64.0 && dLongitude >= 3.0 && dLongitude < 12.0)
nZone = 32;
if (dLatitude >= 72.0 && dLongitude >= 0.0 && dLongitude < 42.0) {
if (dLongitude < 9.0) nZone = 31;
else if (dLongitude < 21.0) nZone = 33;
else if (dLongitude < 33.0) nZone = 35;
else nZone = 37;
}
return nZone;
}
// WGS84 正投影:输入纬度/经度(度),成功后输出自然分带和东向/北向坐标(米)。
bool geographicToUtm(double dLatitude, double dLongitude, QString& sZone,
double& dEasting, double& dNorthing)
{
if (!isValidGeographic(dLatitude, dLongitude)) return false;
const int nZone = longitudeZone(dLatitude, dLongitude);
const double dLat = dLatitude * s_dPi / 180.0;
const double dDeltaLon = (dLongitude - (-183.0 + nZone * 6.0)) * s_dPi / 180.0;
const double dE2 = s_dEccentricity2;
const double dEp2 = dE2 / (1.0 - dE2); // 第二偏心率平方,用于横轴墨卡托级数系数。
const double dN = s_dSemiMajor / sqrt(1.0 - dE2 * sin(dLat) * sin(dLat));
const double dT = tan(dLat) * tan(dLat);
const double dC = dEp2 * cos(dLat) * cos(dLat);
const double dA = cos(dLat) * dDeltaLon;
const double dA2 = dA * dA;
const double dM = s_dSemiMajor * (
(1.0 - dE2 / 4.0 - 3.0 * dE2 * dE2 / 64.0 - 5.0 * dE2 * dE2 * dE2 / 256.0) * dLat
- (3.0 * dE2 / 8.0 + 3.0 * dE2 * dE2 / 32.0 + 45.0 * dE2 * dE2 * dE2 / 1024.0) * sin(2.0 * dLat)
+ (15.0 * dE2 * dE2 / 256.0 + 45.0 * dE2 * dE2 * dE2 / 1024.0) * sin(4.0 * dLat)
- 35.0 * dE2 * dE2 * dE2 / 3072.0 * sin(6.0 * dLat));
dEasting = 500000.0 + s_dScale * dN * (dA + (1.0 - dT + dC) * dA * dA2 / 6.0
+ (5.0 - 18.0 * dT + dT * dT + 72.0 * dC - 58.0 * dEp2) * dA * dA2 * dA2 / 120.0);
dNorthing = s_dScale * (dM + dN * tan(dLat) * (dA2 / 2.0
+ (5.0 - dT + 9.0 * dC + 4.0 * dC * dC) * dA2 * dA2 / 24.0
+ (61.0 - 58.0 * dT + dT * dT + 600.0 * dC - 330.0 * dEp2) * dA2 * dA2 * dA2 / 720.0));
if (dLatitude < 0.0) dNorthing += 10000000.0; // 南半球假北值。
sZone = zoneText(nZone, latitudeBand(dLatitude));
return isValidProjected(dEasting, dNorthing);
}
// WGS84 反投影:输入已校验的分带及米制坐标,成功后输出纬度/经度(度)。
bool utmToGeographic(int nZone, char cBand, double dEasting, double dNorthing,
double& dLatitude, double& dLongitude)
{
int nParsedZone = 0; // 公共入口不能依赖调用方已检查分带,避免无效带号直接参与计算。
char cParsedBand = 0;
if (!parseZone(zoneText(nZone, cBand), nParsedZone, cParsedBand)
|| !isValidProjected(dEasting, dNorthing)) return false;
const double dE2 = s_dEccentricity2;
const double dEp2 = dE2 / (1.0 - dE2);
const double dE1 = (1.0 - sqrt(1.0 - dE2)) / (1.0 + sqrt(1.0 - dE2));
const double dY = dNorthing - (cBand < 'N' ? 10000000.0 : 0.0);
const double dMu = dY / (s_dScale * s_dSemiMajor
* (1.0 - dE2 / 4.0 - 3.0 * dE2 * dE2 / 64.0 - 5.0 * dE2 * dE2 * dE2 / 256.0));
const double dPhi = dMu + (3.0 * dE1 / 2.0 - 27.0 * pow(dE1, 3.0) / 32.0) * sin(2.0 * dMu)
+ (21.0 * dE1 * dE1 / 16.0 - 55.0 * pow(dE1, 4.0) / 32.0) * sin(4.0 * dMu)
+ 151.0 * pow(dE1, 3.0) / 96.0 * sin(6.0 * dMu)
+ 1097.0 * pow(dE1, 4.0) / 512.0 * sin(8.0 * dMu);
if (!qIsFinite(dPhi) || qAbs(cos(dPhi)) < 1e-6) return false;
const double dC = dEp2 * cos(dPhi) * cos(dPhi);
const double dT = tan(dPhi) * tan(dPhi);
const double dN = s_dSemiMajor / sqrt(1.0 - dE2 * sin(dPhi) * sin(dPhi));
const double dR = s_dSemiMajor * (1.0 - dE2) / pow(1.0 - dE2 * sin(dPhi) * sin(dPhi), 1.5);
const double dD = (dEasting - 500000.0) / (dN * s_dScale);
const double dD2 = dD * dD;
dLatitude = (dPhi - dN * tan(dPhi) / dR * (dD2 / 2.0
- (5.0 + 3.0 * dT + 10.0 * dC - 4.0 * dC * dC - 9.0 * dEp2) * dD2 * dD2 / 24.0
+ (61.0 + 90.0 * dT + 298.0 * dC + 45.0 * dT * dT - 252.0 * dEp2 - 3.0 * dC * dC)
* dD2 * dD2 * dD2 / 720.0)) * 180.0 / s_dPi;
dLongitude = -183.0 + nZone * 6.0 + (dD - (1.0 + 2.0 * dT + dC) * dD * dD2 / 6.0
+ (5.0 - 2.0 * dC + 28.0 * dT - 3.0 * dC * dC + 8.0 * dEp2 + 24.0 * dT * dT)
* dD * dD2 * dD2 / 120.0) / cos(dPhi) * 180.0 / s_dPi;
if (!qIsFinite(dLatitude) || !qIsFinite(dLongitude)) return false;
// 仅容忍投影级数在覆盖边界的微小数值误差,不把极区坐标截成合法纬度。
if (dLatitude < -80.0000001 || dLatitude > 84.0000001) return false;
dLatitude = qBound(-80.0, dLatitude, 84.0);
if ((cBand < 'N' && dLatitude >= 0.0) || (cBand >= 'N' && dLatitude < 0.0)) return false;
if (dLongitude > 180.0) dLongitude -= 360.0;
if (dLongitude < -180.0) dLongitude += 360.0;
return isValidGeographic(dLatitude, dLongitude);
}
// 为已校验的分带求覆盖区域中心(度),供用户主动选带时初始化参考点。
bool zoneCenter(int nZone, char cBand, double& dLatitude, double& dLongitude)
{
int nParsedZone = 0;
char cParsedBand = 0;
if (!parseZone(zoneText(nZone, cBand), nParsedZone, cParsedBand)) return false;
const int nBand = QString::fromLatin1(s_szBands).indexOf(QChar(cBand));
dLatitude = cBand == 'X' ? 78.0 : -76.0 + nBand * 8.0;
dLongitude = -183.0 + nZone * 6.0;
// 特殊加宽/缩窄带使用实际覆盖区域中心,确保初始化后仍属于用户选中的带。
if (cBand == 'V' && nZone == 31) dLongitude = 1.5;
if (cBand == 'V' && nZone == 32) dLongitude = 7.5;
if (cBand == 'X' && nZone == 31) dLongitude = 4.5;
if (cBand == 'X' && nZone == 37) dLongitude = 37.5;
return true;
}
} // namespace nmUtmProjection

@ -1,4 +1,5 @@
#include "nmWxGeoRefDlg.h"
#include "nmUtmProjection.h"
#include "iUnitGroup.h"
#include "iUnitHelper.h"
@ -14,161 +15,9 @@
#include <QPushButton>
#include <QVBoxLayout>
#include <QtCore/qnumeric.h>
#include <cmath>
namespace
{
// WGS84 投影计算只处理度和米,不访问控件、工程对象或显示单位。
const double s_dPi = 3.14159265358979323846;
const double s_dSemiMajor = 6378137.0; // WGS84 长半轴,单位 m。
const double s_dFlattening = 1.0 / 298.257223563;
const double s_dEccentricity2 = 2.0 * s_dFlattening - s_dFlattening * s_dFlattening;
const double s_dScale = 0.9996; // UTM 中央经线比例因子。
const char s_szBands[] = "CDEFGHJKLMNPQRSTUVWX";
// 检查度制经纬度是否有限且位于 WGS84/UTM 支持范围内。
bool isValidGeographic(double dLatitude, double dLongitude)
{
// UTM 仅覆盖南纬 80 度至北纬 84 度;极区需要另一套投影,不能沿用 UTM 公式。
return qIsFinite(dLatitude) && qIsFinite(dLongitude)
&& dLatitude >= -80.0 && dLatitude <= 84.0
&& dLongitude >= -180.0 && dLongitude <= 180.0;
}
// 检查米制投影坐标的基本范围;画布显示范围不参与参考点合法性判断。
bool isValidProjected(double dEasting, double dNorthing)
{
// 检查参考点本身,不随画布缩放范围改变允许输入的坐标范围。
return qIsFinite(dEasting) && qIsFinite(dNorthing)
&& dEasting >= 0.0 && dEasting <= 1000000.0
&& dNorthing >= 0.0 && dNorthing <= 10000000.0;
}
// 解析两位经度带号和一位纬度带字母;失败时输出参数不可用于转换。
bool parseZone(const QString& sZone, int& nZone, char& cBand)
{
bool bNumber = false;
nZone = sZone.left(2).toInt(&bNumber);
if (sZone.size() != 3 || !bNumber || nZone < 1 || nZone > 60) return false;
cBand = sZone.at(2).toLatin1();
if (!QString::fromLatin1(s_szBands).contains(QChar(cBand))) return false;
// Svalbard 的 X 纬度带只有加宽后的奇数分带,32X/34X/36X 不存在。
return cBand != 'X' || (nZone != 32 && nZone != 34 && nZone != 36);
}
// 根据合法的度制纬度确定 C~X 纬度带,跳过 I、O。
char latitudeBand(double dLatitude)
{
// X 带覆盖 72~84 度,最后一个索引需截断,避免 84 度越界。
const int nBand = qBound(0, static_cast<int>(floor((dLatitude + 80.0) / 8.0)), 19);
return s_szBands[nBand];
}
// 生成与旧工程一致的三字符分带标识,如 01C、50S。
QString zoneText(int nZone, char cBand)
{
return QString("%1%2").arg(nZone, 2, 10, QLatin1Char('0')).arg(QChar(cBand));
}
// 按合法的度制经纬度选择自然 UTM 经度带,包含区域特例及日期变更线边界。
int longitudeZone(double dLatitude, double dLongitude)
{
// +180 度属于第 60 带,不能产生不存在的第 61 带。
int nZone = qBound(1, static_cast<int>(floor((dLongitude + 180.0) / 6.0)) + 1, 60);
// 按 UTM 约定处理 Norway 和 Svalbard 的特殊带宽。
if (dLatitude >= 56.0 && dLatitude < 64.0 && dLongitude >= 3.0 && dLongitude < 12.0)
nZone = 32;
if (dLatitude >= 72.0 && dLongitude >= 0.0 && dLongitude < 42.0) {
if (dLongitude < 9.0) nZone = 31;
else if (dLongitude < 21.0) nZone = 33;
else if (dLongitude < 33.0) nZone = 35;
else nZone = 37;
}
return nZone;
}
// WGS84 正投影:输入纬度/经度(度),成功后输出自然分带和东向/北向坐标(米)。
bool geographicToUtm(double dLatitude, double dLongitude, QString& sZone,
double& dEasting, double& dNorthing)
{
if (!isValidGeographic(dLatitude, dLongitude)) return false;
const int nZone = longitudeZone(dLatitude, dLongitude);
const double dLat = dLatitude * s_dPi / 180.0;
const double dDeltaLon = (dLongitude - (-183.0 + nZone * 6.0)) * s_dPi / 180.0;
const double dE2 = s_dEccentricity2;
const double dEp2 = dE2 / (1.0 - dE2); // 第二偏心率平方,用于横轴墨卡托级数系数。
const double dN = s_dSemiMajor / sqrt(1.0 - dE2 * sin(dLat) * sin(dLat));
const double dT = tan(dLat) * tan(dLat);
const double dC = dEp2 * cos(dLat) * cos(dLat);
const double dA = cos(dLat) * dDeltaLon;
const double dA2 = dA * dA;
const double dM = s_dSemiMajor * (
(1.0 - dE2 / 4.0 - 3.0 * dE2 * dE2 / 64.0 - 5.0 * dE2 * dE2 * dE2 / 256.0) * dLat
- (3.0 * dE2 / 8.0 + 3.0 * dE2 * dE2 / 32.0 + 45.0 * dE2 * dE2 * dE2 / 1024.0) * sin(2.0 * dLat)
+ (15.0 * dE2 * dE2 / 256.0 + 45.0 * dE2 * dE2 * dE2 / 1024.0) * sin(4.0 * dLat)
- 35.0 * dE2 * dE2 * dE2 / 3072.0 * sin(6.0 * dLat));
dEasting = 500000.0 + s_dScale * dN * (dA + (1.0 - dT + dC) * dA * dA2 / 6.0
+ (5.0 - 18.0 * dT + dT * dT + 72.0 * dC - 58.0 * dEp2) * dA * dA2 * dA2 / 120.0);
dNorthing = s_dScale * (dM + dN * tan(dLat) * (dA2 / 2.0
+ (5.0 - dT + 9.0 * dC + 4.0 * dC * dC) * dA2 * dA2 / 24.0
+ (61.0 - 58.0 * dT + dT * dT + 600.0 * dC - 330.0 * dEp2) * dA2 * dA2 * dA2 / 720.0));
if (dLatitude < 0.0) dNorthing += 10000000.0; // 南半球假北值。
sZone = zoneText(nZone, latitudeBand(dLatitude));
return isValidProjected(dEasting, dNorthing);
}
// WGS84 反投影:输入已校验的分带及米制坐标,成功后输出纬度/经度(度)。
bool utmToGeographic(int nZone, char cBand, double dEasting, double dNorthing,
double& dLatitude, double& dLongitude)
{
if (!isValidProjected(dEasting, dNorthing)) return false;
const double dE2 = s_dEccentricity2;
const double dEp2 = dE2 / (1.0 - dE2);
const double dE1 = (1.0 - sqrt(1.0 - dE2)) / (1.0 + sqrt(1.0 - dE2));
const double dY = dNorthing - (cBand < 'N' ? 10000000.0 : 0.0);
const double dMu = dY / (s_dScale * s_dSemiMajor
* (1.0 - dE2 / 4.0 - 3.0 * dE2 * dE2 / 64.0 - 5.0 * dE2 * dE2 * dE2 / 256.0));
const double dPhi = dMu + (3.0 * dE1 / 2.0 - 27.0 * pow(dE1, 3.0) / 32.0) * sin(2.0 * dMu)
+ (21.0 * dE1 * dE1 / 16.0 - 55.0 * pow(dE1, 4.0) / 32.0) * sin(4.0 * dMu)
+ 151.0 * pow(dE1, 3.0) / 96.0 * sin(6.0 * dMu)
+ 1097.0 * pow(dE1, 4.0) / 512.0 * sin(8.0 * dMu);
if (!qIsFinite(dPhi) || qAbs(cos(dPhi)) < 1e-6) return false;
const double dC = dEp2 * cos(dPhi) * cos(dPhi);
const double dT = tan(dPhi) * tan(dPhi);
const double dN = s_dSemiMajor / sqrt(1.0 - dE2 * sin(dPhi) * sin(dPhi));
const double dR = s_dSemiMajor * (1.0 - dE2) / pow(1.0 - dE2 * sin(dPhi) * sin(dPhi), 1.5);
const double dD = (dEasting - 500000.0) / (dN * s_dScale);
const double dD2 = dD * dD;
dLatitude = (dPhi - dN * tan(dPhi) / dR * (dD2 / 2.0
- (5.0 + 3.0 * dT + 10.0 * dC - 4.0 * dC * dC - 9.0 * dEp2) * dD2 * dD2 / 24.0
+ (61.0 + 90.0 * dT + 298.0 * dC + 45.0 * dT * dT - 252.0 * dEp2 - 3.0 * dC * dC)
* dD2 * dD2 * dD2 / 720.0)) * 180.0 / s_dPi;
dLongitude = -183.0 + nZone * 6.0 + (dD - (1.0 + 2.0 * dT + dC) * dD * dD2 / 6.0
+ (5.0 - 2.0 * dC + 28.0 * dT - 3.0 * dC * dC + 8.0 * dEp2 + 24.0 * dT * dT)
* dD * dD2 * dD2 / 120.0) / cos(dPhi) * 180.0 / s_dPi;
if (!qIsFinite(dLatitude) || !qIsFinite(dLongitude)) return false;
// 仅容忍投影级数在覆盖边界的微小数值误差,不把极区坐标截成合法纬度。
if (dLatitude < -80.0000001 || dLatitude > 84.0000001) return false;
dLatitude = qBound(-80.0, dLatitude, 84.0);
if ((cBand < 'N' && dLatitude >= 0.0) || (cBand >= 'N' && dLatitude < 0.0)) return false;
if (dLongitude > 180.0) dLongitude -= 360.0;
if (dLongitude < -180.0) dLongitude += 360.0;
return isValidGeographic(dLatitude, dLongitude);
}
// 为已校验的分带求覆盖区域中心(度),供用户主动选带时初始化参考点。
void zoneCenter(int nZone, char cBand, double& dLatitude, double& dLongitude)
{
const int nBand = QString::fromLatin1(s_szBands).indexOf(QChar(cBand));
dLatitude = cBand == 'X' ? 78.0 : -76.0 + nBand * 8.0;
dLongitude = -183.0 + nZone * 6.0;
// 特殊加宽/缩窄带使用实际覆盖区域中心,确保初始化后仍属于用户选中的带。
if (cBand == 'V' && nZone == 31) dLongitude = 1.5;
if (cBand == 'V' && nZone == 32) dLongitude = 7.5;
if (cBand == 'X' && nZone == 31) dLongitude = 4.5;
if (cBand == 'X' && nZone == 37) dLongitude = 37.5;
}
// 创建与模型位置、测量工具一致的三列坐标网格,布局所有权交给分组控件。
QGridLayout* createCoordinateGrid(QGroupBox* pGroup)
{
@ -229,7 +78,7 @@ void nmWxGeoRefDlg::initUI()
foreach (const QString& sZone, listZones) {
int nZone = 0;
char cBand = 0;
if (parseZone(sZone, nZone, cBand)) m_pUtmZoneComboBox->addItem(sZone);
if (nmUtmProjection::parseZone(sZone, nZone, cBand)) m_pUtmZoneComboBox->addItem(sZone);
}
m_pUtmZoneComboBox->setCurrentIndex(-1);
pProjectionGrid->addWidget(m_pUtmZoneComboBox, 0, 1, 1, 2);
@ -335,10 +184,10 @@ void nmWxGeoRefDlg::loadDataToUI()
m_pUtmZoneComboBox->setCurrentIndex(m_pUtmZoneComboBox->findText(m_sUtmZone));
int nZone = 0;
char cBand = 0;
m_bHasCoordinates = bComplete && parseZone(m_sUtmZone, nZone, cBand)
m_bHasCoordinates = bComplete && nmUtmProjection::parseZone(m_sUtmZone, nZone, cBand)
&& m_pUtmZoneComboBox->currentIndex() >= 0
&& isValidGeographic(m_dBaseValues[Latitude], m_dBaseValues[Longitude])
&& isValidProjected(m_dBaseValues[Easting], m_dBaseValues[Northing]);
&& nmUtmProjection::isValidGeographic(m_dBaseValues[Latitude], m_dBaseValues[Longitude])
&& nmUtmProjection::isValidProjected(m_dBaseValues[Easting], m_dBaseValues[Northing]);
m_bInputValid = m_bHasCoordinates;
// 加载时不重新投影或写回舍入值,避免仅打开旧工程就移动参考点。
m_bRefreshing = false;
@ -370,17 +219,17 @@ bool nmWxGeoRefDlg::updateCoordinates(InputSource eSource)
bool bValid = unitsAvailable();
if (eSource == GeographicInput) {
bValid = bValid && readField(Longitude, dLongitude) && readField(Latitude, dLatitude)
&& geographicToUtm(dLatitude, dLongitude, sZone, dEasting, dNorthing);
&& nmUtmProjection::geographicToUtm(dLatitude, dLongitude, sZone, dEasting, dNorthing);
} else if (eSource == ProjectedInput) {
int nZone = 0;
char cBand = 0;
bValid = bValid && parseZone(sZone, nZone, cBand)
bValid = bValid && nmUtmProjection::parseZone(sZone, nZone, cBand)
&& readField(Easting, dEasting) && readField(Northing, dNorthing)
&& utmToGeographic(nZone, cBand, dEasting, dNorthing, dLatitude, dLongitude);
&& nmUtmProjection::utmToGeographic(nZone, cBand, dEasting, dNorthing, dLatitude, dLongitude);
if (bValid) {
// 字母表示纬度带,不仅是南北半球;北向坐标跨带后同步更新字母。
sZone = zoneText(nZone, latitudeBand(dLatitude));
bValid = parseZone(sZone, nZone, cBand);
sZone = nmUtmProjection::zoneText(nZone, nmUtmProjection::latitudeBand(dLatitude));
bValid = nmUtmProjection::parseZone(sZone, nZone, cBand);
}
} else {
return m_bInputValid;
@ -457,10 +306,10 @@ void nmWxGeoRefDlg::onUtmZoneChanged(int nIndex)
const QString sSelected = m_pUtmZoneComboBox->itemText(nIndex);
double dLatitude = 0.0, dLongitude = 0.0, dEasting = 0.0, dNorthing = 0.0;
QString sZone;
if (!parseZone(sSelected, nZone, cBand)) return;
zoneCenter(nZone, cBand, dLatitude, dLongitude);
if (!nmUtmProjection::parseZone(sSelected, nZone, cBand)) return;
if (!nmUtmProjection::zoneCenter(nZone, cBand, dLatitude, dLongitude)) return;
// 沿用选带后填入区域中心的交互;四个值由同一次正投影产生,避免默认坐标相互矛盾。
m_bInputValid = geographicToUtm(dLatitude, dLongitude, sZone, dEasting, dNorthing)
m_bInputValid = nmUtmProjection::geographicToUtm(dLatitude, dLongitude, sZone, dEasting, dNorthing)
&& sZone == sSelected;
if (m_bInputValid) {
m_eLastInput = NoInput;

@ -3,6 +3,7 @@
#include "iUnitWxBinder.h"
#include "nmDataAnalyzeManager.h"
#include "nmDataGeoRef.h"
#include "nmUtmProjection.h"
#include "nmGuiPlot.h"
#include "ZxBaseUtil.h"
@ -16,7 +17,6 @@
#include <QPushButton>
#include <QVBoxLayout>
#include <qnumeric.h>
#include <cmath>
namespace
{
@ -57,6 +57,8 @@ namespace
nmWxPointerPosDlg::nmWxPointerPosDlg(QWidget* parent)
: iDlgBase(parent),
m_dLastLocalX(0.0),
m_dLastLocalY(0.0),
m_pLonEdit(nullptr),
m_pLatEdit(nullptr),
m_pUtmZoneEdit(nullptr)
@ -76,6 +78,11 @@ nmWxPointerPosDlg::nmWxPointerPosDlg(QWidget* parent)
}
initUI();
if (m_pDataManager) {
// Manager 在完整替换参考点后通知,避免属性逐个赋值时读到不一致的中间状态。
connect(m_pDataManager.data(), SIGNAL(sigGeoReferenceChanged()), this, SLOT(refreshCoordinates()));
connect(m_pDataManager.data(), SIGNAL(destroyed(QObject*)), this, SLOT(onDataManagerDestroyed()));
}
// 沿用原窗口的初始状态:尚未收到鼠标位置时,展示本地原点及对应参考点。
setPointerPos(0.0, 0.0);
setWindowTitle(tr("Pointer position"));
@ -182,8 +189,22 @@ void nmWxPointerPosDlg::clearGeographicValues()
setLengthValue(Northing, 0.0, false);
}
void nmWxPointerPosDlg::refreshCoordinates()
{
setPointerPos(m_dLastLocalX, m_dLastLocalY);
}
void nmWxPointerPosDlg::onDataManagerDestroyed()
{
// 显式置空,不依赖 QPointer 在不同 Qt 版本中的销毁通知先后顺序。
m_pDataManager = nullptr;
refreshCoordinates();
}
void nmWxPointerPosDlg::setPointerPos(double x, double y)
{
m_dLastLocalX = x;
m_dLastLocalY = y;
// 若所属分析已释放或画布已改绑,不把新画布的坐标套用到旧分析的参考点。
nmGuiPlot* pOwnerPlot = qobject_cast<nmGuiPlot*>(parentWidget());
const bool bValidPoint = !m_pDataManager.isNull() && pOwnerPlot != nullptr &&
@ -206,61 +227,41 @@ void nmWxPointerPosDlg::setPointerPos(double x, double y)
}
const QString sZone = pGeoRef->getUtmZone().getValue().toString().trimmed();
bool bZoneOK = false;
const int nZone = sZone.left(2).toInt(&bZoneOK);
const QString sBands("CDEFGHJKLMNPQRSTUVWX");
if (!bZoneOK || nZone < 1 || nZone > 60 || sZone.size() != 3 ||
!sBands.contains(sZone.at(2)))
int nZone = 0; // 参考点的经度带号,整个本地网格始终使用同一投影坐标系。
char cBand = 0; // 参考点的纬度带,用于识别南北半球及假北值。
if (!nmUtmProjection::parseZone(sZone, nZone, cBand))
{
clearGeographicValues();
return;
}
// 空字段不能按 0 参与换算;无效数据只清空显示,不弹校验提示。
// 以分带和 UTM 原值为准,不读取另存的参考点经纬度,避免旧工程两组数值不一致时混算。
bool bEastingOK = false;
bool bNorthingOK = false;
bool bLongitudeOK = false;
bool bLatitudeOK = false;
const double dBaseEasting = pGeoRef->getEasting().getValue().toDouble(&bEastingOK);
const double dBaseNorthing = pGeoRef->getNorthing().getValue().toDouble(&bNorthingOK);
const double dBaseLongitude = pGeoRef->getLongitude().getValue().toDouble(&bLongitudeOK);
const double dBaseLatitude = pGeoRef->getLatitude().getValue().toDouble(&bLatitudeOK);
if (!bEastingOK || !bNorthingOK || !bLongitudeOK || !bLatitudeOK ||
!qIsFinite(dBaseEasting) || !qIsFinite(dBaseNorthing) ||
!qIsFinite(dBaseLongitude) || !qIsFinite(dBaseLatitude) ||
qAbs(dBaseLongitude) > 180.0 || qAbs(dBaseLatitude) > 90.0)
double dLatitude = 0.0; // WGS84 反投影结果,单位为度;仅成功后才格式化显示。
double dLongitude = 0.0;
if (!bEastingOK || !bNorthingOK || !nmUtmProjection::utmToGeographic(
nZone, cBand, dBaseEasting, dBaseNorthing, dLatitude, dLongitude))
{
clearGeographicValues();
return;
}
// 模型坐标为相对参考点的米制偏移,显示单位不参与坐标计算。
// 米制偏移先加在同一投影平面中,再反算经纬度。跨自然经度带/纬度带时不重选投影带,
// 否则相同东向/北向数值会被解释为另一位置;参考点设置与模型位置共用同一反投影入口。
const double dEasting = dBaseEasting + x;
const double dNorthing = dBaseNorthing + y;
if (!qIsFinite(dEasting) || !qIsFinite(dNorthing))
if (!nmUtmProjection::utmToGeographic(nZone, cBand, dEasting, dNorthing, dLatitude, dLongitude))
{
// 非有限值、半球边界或 UTM 覆盖范围外不展示伪坐标;保留本地 X/Y 便于定位。
clearGeographicValues();
return;
}
m_pUtmZoneEdit->setText(sZone);
setLengthValue(Easting, dEasting, true);
setLengthValue(Northing, dNorthing, true);
// 沿用现有的小范围经纬度近似换算,并非严格的 UTM 反投影。
// 极点附近经度换算分母趋近于零,此时保留平面坐标,清空无法可靠计算的经纬度。
const double dMetersPerDegreeLat = 111111.0;
const double dPi = 3.14159265358979323846;
const double dMetersPerDegreeLon = dMetersPerDegreeLat *
std::cos(dBaseLatitude * dPi / 180.0);
if (qAbs(dMetersPerDegreeLon) < 1.0e-6)
{
m_pLonEdit->clear();
m_pLatEdit->clear();
return;
}
const double dLatitude = dBaseLatitude + y / dMetersPerDegreeLat;
const double dLongitude = dBaseLongitude + x / dMetersPerDegreeLon;
m_pLonEdit->setText(formatCoordinate(dLongitude, false));
m_pLatEdit->setText(formatCoordinate(dLatitude, true));
}

Loading…
Cancel
Save