diff --git a/Bin/Config/Lang/cn/nmNum_cn.qm b/Bin/Config/Lang/cn/nmNum_cn.qm index 10778061..53099f7b 100644 Binary files a/Bin/Config/Lang/cn/nmNum_cn.qm and b/Bin/Config/Lang/cn/nmNum_cn.qm differ diff --git a/Bin/Config/Lang/cn/nmNum_cn.ts b/Bin/Config/Lang/cn/nmNum_cn.ts index 026cd99c..3551f2d0 100644 --- a/Bin/Config/Lang/cn/nmNum_cn.ts +++ b/Bin/Config/Lang/cn/nmNum_cn.ts @@ -3454,6 +3454,10 @@ No valid error was returned; keep the last accepted result and reduce the step.< nmWxPebiResultViewWidget + + Load Slice Test Model + 加载切片测试模型 + No result data.暂无结果数据。 Color Scale色标 Scale Grid比例网格 @@ -8955,6 +8959,22 @@ Average pressure in contour: %2 MPa nmVolumeData + + Slice Test Model + 切片测试模型 + + + Test Layers + 测试分层 + + + Test Gradient + 测试渐变 + + + Not enough memory to create the slice test model. + 内存不足,无法创建切片测试模型。 + Not enough memory to import the volume mesh. 内存不足,无法导入三维网格。 @@ -9062,8 +9082,8 @@ Average pressure in contour: %2 MPa nmVolumeImportTask - An unexpected error occurred while importing the volume mesh. - 导入三维网格时发生意外错误。 + An unexpected error occurred while loading the volume mesh. + 加载三维网格时发生意外错误。 @@ -9139,8 +9159,8 @@ Average pressure in contour: %2 MPa 应用 - Reset - 重置 + Restore + 还原 Close @@ -9154,6 +9174,18 @@ Average pressure in contour: %2 MPa Drag the center or outline to move the plane; drag arrows to rotate. 拖动中心手柄或平面轮廓移动平面,拖动箭头旋转平面。 + + Move the plane origin to the model center without changing its normal. + 将切片原点移到模型中心,保持法向不变。 + + + Set the plane parallel to %1 without changing its origin. + 将切片方向设为平行于 %1 平面,保持原点不变。 + + + Restore the last applied plane parameters. + 恢复上次应用的平面参数。 + nmDfnSession diff --git a/Include/nmNum/nmData/nmVolumeDataBuilder.h b/Include/nmNum/nmData/nmVolumeDataBuilder.h index ecc5f378..58300fea 100644 --- a/Include/nmNum/nmData/nmVolumeDataBuilder.h +++ b/Include/nmNum/nmData/nmVolumeDataBuilder.h @@ -3,10 +3,18 @@ #include "nmVolumeData.h" -/** @brief 文件导入和未来三维求解器共用的发布入口,不保留输入对象的可写别名。 */ +/** @brief 文件导入、内置测试模型和未来三维求解器共用的发布入口,不保留输入对象的可写别名。 */ class NM_DATA_EXPORT nmVolumeDataBuilder { public: + /** + * @brief 在内存中生成切片测试模型,不读取文件,也不依赖分析或求解器。 + * @note 模型为三层六面体网格,附带单元分层与节点渐变两种无量纲测试属性。 + * 通过 buildFromGrid 校验并发布;失败或取消返回空指针,可在工作线程调用。 + */ + static QSharedPointer buildSliceTestModel( + QString* pError = nullptr, nmVolumeImportFeedback* pFeedback = nullptr); + /** * @brief 完整复制、校验后返回只读数据;失败或取消返回空指针。 * @note 调用期间输入网格必须由调用方独占,不能被其他线程修改。 diff --git a/Include/nmNum/nmSubWxs/nmVolumeImportTask.h b/Include/nmNum/nmSubWxs/nmVolumeImportTask.h index f3f0d235..c6f1c1f9 100644 --- a/Include/nmNum/nmSubWxs/nmVolumeImportTask.h +++ b/Include/nmNum/nmSubWxs/nmVolumeImportTask.h @@ -7,16 +7,24 @@ #include /** - * @brief 每个结果窗口独占的导入任务。 - * 工作线程只操作局部 Reader 和数据候选,不访问 QWidget、Renderer 或 Manager。 + * @brief 每个结果窗口独占的三维模型加载任务,支持文件和内置切片测试模型。 + * 工作线程只操作局部 Reader、测试网格和数据候选,不访问 QWidget、Renderer 或 Manager。 * 结果只允许在 finished 后读取;取消标志是唯一由两个线程同时访问的成员。 */ class NM_SUB_WXS_EXPORT nmVolumeImportTask : public QThread, public nmVolumeImportFeedback { Q_OBJECT public: - /** @brief 保存输入路径,线程由调用方显式 start;父对象通常为结果窗口。 */ - explicit nmVolumeImportTask(const QString& sFilePath, QObject* pParent = nullptr); + /** @brief 显式区分数据来源,避免用特殊文件路径触发内置模型。 */ + enum SourceType + { + FileSource, ///< 从指定的 VTK 文件读取体网格。 + SliceTestModelSource ///< 在内存中生成固定的切片测试模型。 + }; + + /** @brief 固定来源及输入路径(仅文件来源使用);线程由调用方显式 start。 */ + explicit nmVolumeImportTask(SourceType eSourceType, const QString& sFilePath, + QObject* pParent = nullptr); /** @brief 请求取消并等待安全退出,禁止释放仍运行的 VTK 代码资源。 */ virtual ~nmVolumeImportTask(); /** @brief 原子请求取消,可由 GUI 线程调用,不阻塞等待 Reader。 */ @@ -40,7 +48,8 @@ protected: private: Q_DISABLE_COPY(nmVolumeImportTask) - QString m_sFilePath; ///< 创建时固定的输入路径,运行期间不再改写。 + SourceType m_eSourceType; ///< 创建时固定的数据来源,工作线程据此选择加载方式。 + QString m_sFilePath; ///< 文件来源的输入路径;内置测试模型不使用此字段。 mutable QAtomicInt m_nCancelRequested; ///< GUI 写入、工作线程读取的原子取消标志。 QSharedPointer m_pResult; ///< 工作线程写入,finished 后 GUI 才读取。 QString m_sError; ///< 工作线程写入的失败原因,finished 后读取。 diff --git a/Include/nmNum/nmSubWxs/nmWxPebiResultViewWidget.h b/Include/nmNum/nmSubWxs/nmWxPebiResultViewWidget.h index 15bb1184..58e7286d 100644 --- a/Include/nmNum/nmSubWxs/nmWxPebiResultViewWidget.h +++ b/Include/nmNum/nmSubWxs/nmWxPebiResultViewWidget.h @@ -25,6 +25,7 @@ class iUnitGroup; class nmDataAnalyzeManager; class nmWxPebiResultRegionState; class nmWxPebiVolumeState; +class nmVolumeImportTask; struct nmVolumeSliceSettings; class nmPebiResultSceneController; class nmPebiResultSnapshot; @@ -210,7 +211,7 @@ public: * @return 已启动任务返回 true;忙碌或路径为空返回 false,当前画面不变。 */ bool importVolumeFile(const QString& sFilePath); - /** @brief 返回当前是否正在显示外部三维数据,而非正式计算结果。 */ + /** @brief 返回当前是否显示独立三维模型(文件导入或内置测试模型),而非正式计算结果。 */ bool isImportedVolumeMode() const; private slots: @@ -236,9 +237,11 @@ private slots: void refreshVolumeSliceView(); /** @brief 从切片菜单选择文件,再启动可取消后台导入。 */ void onImportVolumeRequested(); + /** @brief 从切片菜单启动内置测试模型加载,无需选择外部文件。 */ + void onLoadSliceTestModelRequested(); /** @brief 原子标记取消;不等待或强行终止 Reader。 */ void onCancelVolumeImport(); - /** @brief 在线程结束后准备候选场景,成功才提交外部模型画面。 */ + /** @brief 在线程结束后准备候选场景,成功才提交三维模型画面。 */ void onVolumeImportFinished(); /** @brief 返回仍有效的原结果或最新结果;绑定失败保留外部模型。 */ void onReturnToCalculationResult(); @@ -295,6 +298,11 @@ private: void disconnectDataManager(); /** @brief 汇总播放、导出、绘制和导入任务状态,判定是否允许开始导入。 */ bool canImportVolume() const; + /** + * @brief 接管未启动的加载任务,统一连接进度、取消及场景提交回调。 + * @note 调用者须先在 GUI 线程检查 canImportVolume;任务的父对象应为本窗口。 + */ + void startVolumeLoad(nmVolumeImportTask* pTask); /** @brief 同步切片菜单及外部模式下的业务动作,不触发渲染。 */ void synchronizeVolumeActions(); /** @brief 关闭参数窗口并解绑平面,不渲染;释放数据时同时解除对旧模型的引用。 */ diff --git a/Include/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.h b/Include/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.h index d281855b..a8e9d9f2 100644 --- a/Include/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.h +++ b/Include/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.h @@ -21,7 +21,7 @@ public: explicit nmWxVolumeSliceSettingsDlg(QWidget* pParent = nullptr); /** @brief 更换当前模型及已应用参数,清除前一模型的草稿和错误。 */ void setData(const QSharedPointer& pData, const nmVolumeSliceSettings& oApplied); - /** @brief 提交成功后同步归一化参数,同时更新重置目标。 */ + /** @brief 提交成功后同步归一化参数,同时更新“还原”操作的目标。 */ void setAppliedSettings(const nmVolumeSliceSettings& oSettings); /** @brief 同步底栏已应用的着色属性,保留原点和法向的未应用草稿。 */ void setAppliedProperty(const QString& sPropertyId); @@ -53,15 +53,18 @@ private slots: void onAxisRequested(); /** @brief 将草稿原点移到模型中心,保持法向与属性。 */ void onCenterRequested(); - /** @brief 恢复最后已应用参数并同步辅助平面。 */ - void onResetRequested(); + /** @brief 撤销未应用的平面编辑,恢复最近一次成功应用的参数并同步辅助平面。 */ + void onRestoreRequested(); /** @brief 校验有效后请求宿主提交当前草稿。 */ void onApplyRequested(); /** @brief 更新已应用状态中的显示偏好,不提交原点和法向草稿。 */ void onDisplayOptionsChanged(); private: - /** @brief 按现有参数窗口样式创建分组、对齐的编辑控件及固定顺序的底部按钮。 */ + /** + * @brief 按统一参数窗口样式创建分组、编辑控件及“还原、应用、关闭”按钮。 + * @note 字体和主题决定推荐尺寸,输入列横向伸展;参数与快捷操作沿用原有预览、应用流程。 + */ void createUi(); /** @brief 阻止信号递归地把值对象写入所有控件,然后更新校验提示。 */ void writeSettings(const nmVolumeSliceSettings& oSettings); diff --git a/Src/nmNum/nmData/nmVolumeDataBuilder.cpp b/Src/nmNum/nmData/nmVolumeDataBuilder.cpp index 2aae981c..236d79d3 100644 --- a/Src/nmNum/nmData/nmVolumeDataBuilder.cpp +++ b/Src/nmNum/nmData/nmVolumeDataBuilder.cpp @@ -30,6 +30,10 @@ static const char* const s_pVolumeTranslationMarkers[] = { QT_TRANSLATE_NOOP("nmVolumeData", "The mesh contains non-finite coordinates."), QT_TRANSLATE_NOOP("nmVolumeData", "The mesh contains repeated cell vertices."), QT_TRANSLATE_NOOP("nmVolumeData", "The mesh must have a finite extent in all three directions."), + QT_TRANSLATE_NOOP("nmVolumeData", "Slice Test Model"), + QT_TRANSLATE_NOOP("nmVolumeData", "Test Layers"), + QT_TRANSLATE_NOOP("nmVolumeData", "Test Gradient"), + QT_TRANSLATE_NOOP("nmVolumeData", "Not enough memory to create the slice test model."), QT_TRANSLATE_NOOP("nmVolumeData", "Volume import canceled.") }; @@ -57,6 +61,90 @@ int expectedPointCount(int nCellType) } } +QSharedPointer nmVolumeDataBuilder::buildSliceTestModel( + QString* pError, nmVolumeImportFeedback* pFeedback) +{ + if(pError != nullptr) pError->clear(); + QString sError; + try { + do { + if(canceled(pFeedback)) break; + if(pFeedback != nullptr) pFeedback->reportProgress(0); + + // 固定小网格便于重复测试:5184 个六面体、6175 个共享节点。 + // 三轴范围为 [-120,120]、[-90,90]、[-60,60],初始截面经过原点。 + const int nXCells = 24; + const int nYCells = 18; + const int nZCells = 12; + const double dSpacing = 10.0; + const vtkIdType nRowStride = nXCells + 1; + const vtkIdType nPlaneStride = nRowStride * (nYCells + 1); + const vtkIdType nPointCount = nPlaneStride * (nZCells + 1); + const vtkIdType nCellCount = nXCells * nYCells * nZCells; + vtkSmartPointer pPoints = vtkSmartPointer::New(); + pPoints->SetDataTypeToDouble(); + pPoints->SetNumberOfPoints(nPointCount); + vtkSmartPointer pGradient = vtkSmartPointer::New(); + pGradient->SetName(volumeText("Test Gradient").toUtf8().constData()); + pGradient->SetNumberOfComponents(1); + pGradient->SetNumberOfTuples(nPointCount); + for(int nZ = 0; nZ <= nZCells; ++nZ) { + if(canceled(pFeedback)) break; + for(int nY = 0; nY <= nYCells; ++nY) { + for(int nX = 0; nX <= nXCells; ++nX) { + const vtkIdType nPoint = nZ * nPlaneStride + nY * nRowStride + nX; + pPoints->SetPoint(nPoint, (nX - nXCells / 2) * dSpacing, + (nY - nYCells / 2) * dSpacing, (nZ - nZCells / 2) * dSpacing); + // 三个方向权重不同,斜切时也能辨认方向;范围 0~100,原点值为 50。 + const double dGradient = 100.0 * (double(nX) / nXCells + + 2.0 * nY / nYCells + 3.0 * nZ / nZCells) / 6.0; + pGradient->SetValue(nPoint, dGradient); + } + } + if(pFeedback != nullptr) pFeedback->reportProgress(25 * (nZ + 1) / (nZCells + 1)); + } + if(canceled(pFeedback)) break; + + vtkSmartPointer pGrid = vtkSmartPointer::New(); + pGrid->SetPoints(pPoints); + pGrid->Allocate(nCellCount); + vtkSmartPointer pLayers = vtkSmartPointer::New(); + pLayers->SetName(volumeText("Test Layers").toUtf8().constData()); + pLayers->SetNumberOfComponents(1); + pLayers->SetNumberOfTuples(nCellCount); + for(int nZ = 0; nZ < nZCells; ++nZ) { + if(canceled(pFeedback)) break; + for(int nY = 0; nY < nYCells; ++nY) { + for(int nX = 0; nX < nXCells; ++nX) { + const vtkIdType nBase = nZ * nPlaneStride + nY * nRowStride + nX; + // 按 VTK_HEXAHEDRON 的底面、顶面顺序连接;相邻单元共享节点。 + vtkIdType aPoints[8] = { + nBase, nBase + 1, nBase + nRowStride + 1, nBase + nRowStride, + nBase + nPlaneStride, nBase + nPlaneStride + 1, + nBase + nPlaneStride + nRowStride + 1, nBase + nPlaneStride + nRowStride + }; + const vtkIdType nCell = pGrid->InsertNextCell(VTK_HEXAHEDRON, 8, aPoints); + // 自下而上分为 1、2、3 层,界面位于 Z=-20、Z=20;仅供显示测试。 + pLayers->SetValue(nCell, 1 + nZ / (nZCells / 3)); + } + } + if(pFeedback != nullptr) pFeedback->reportProgress(25 + 30 * (nZ + 1) / nZCells); + } + if(canceled(pFeedback)) break; + // 默认按单元分层着色;用户可在现有属性下拉框中改选连续的节点渐变。 + pGrid->GetCellData()->SetScalars(pLayers); + pGrid->GetPointData()->SetScalars(pGradient); + return buildFromGrid(pGrid, volumeText("Slice Test Model"), pError, pFeedback); + } while(false); + } catch(const std::bad_alloc&) { + sError = volumeText("Not enough memory to create the slice test model."); + } + if(pError != nullptr) { + *pError = canceled(pFeedback) ? volumeText("Volume import canceled.") : sError; + } + return QSharedPointer(); +} + QSharedPointer nmVolumeDataBuilder::buildFromGrid( vtkUnstructuredGrid* pGrid, const QString& sSourceName, QString* pError, nmVolumeImportFeedback* pFeedback) diff --git a/Src/nmNum/nmSubWxs/nmVolumeImportTask.cpp b/Src/nmNum/nmSubWxs/nmVolumeImportTask.cpp index 7aeb5477..7c27c2ac 100644 --- a/Src/nmNum/nmSubWxs/nmVolumeImportTask.cpp +++ b/Src/nmNum/nmSubWxs/nmVolumeImportTask.cpp @@ -1,8 +1,10 @@ #include "nmVolumeImportTask.h" #include "nmVolumeDataImporter.h" +#include "nmVolumeDataBuilder.h" -nmVolumeImportTask::nmVolumeImportTask(const QString& sFilePath, QObject* pParent) - : QThread(pParent), m_sFilePath(sFilePath), m_nCancelRequested(0), m_nLastProgress(-1) +nmVolumeImportTask::nmVolumeImportTask(SourceType eSourceType, const QString& sFilePath, QObject* pParent) + : QThread(pParent), m_eSourceType(eSourceType), m_sFilePath(sFilePath), + m_nCancelRequested(0), m_nLastProgress(-1) { } nmVolumeImportTask::~nmVolumeImportTask() @@ -24,11 +26,16 @@ void nmVolumeImportTask::reportProgress(int nPercent) void nmVolumeImportTask::run() { try { - m_pResult = nmVolumeDataImporter::loadFile(m_sFilePath, &m_sError, this); + // 两种来源都只发布只读候选,场景切换仍由 GUI 在线程结束后统一处理。 + if(m_eSourceType == SliceTestModelSource) { + m_pResult = nmVolumeDataBuilder::buildSliceTestModel(&m_sError, this); + } else { + m_pResult = nmVolumeDataImporter::loadFile(m_sFilePath, &m_sError, this); + } } catch(...) { - // C++ 异常不得越过 QThread::run 边界,否则一次导入可能终止整个进程。 + // C++ 异常不得越过 QThread::run 边界,否则一次加载可能终止整个进程。 m_pResult.clear(); - m_sError = tr("An unexpected error occurred while importing the volume mesh."); + m_sError = tr("An unexpected error occurred while loading the volume mesh."); } if(isCanceled()) m_pResult.clear(); } diff --git a/Src/nmNum/nmSubWxs/nmWxPebiResultViewWidget.cpp b/Src/nmNum/nmSubWxs/nmWxPebiResultViewWidget.cpp index ea25750f..e112205d 100644 --- a/Src/nmNum/nmSubWxs/nmWxPebiResultViewWidget.cpp +++ b/Src/nmNum/nmSubWxs/nmWxPebiResultViewWidget.cpp @@ -1104,22 +1104,23 @@ void nmWxPebiRegionPressureStatisticsDlg::refreshValues() } } -/** @brief 外部三维模式的窗口私有状态,所有成员仅由 GUI 线程管理。 */ +/** @brief 独立三维模型(文件或内置测试模型)的窗口私有状态,仅由 GUI 线程管理。 */ class nmWxPebiVolumeState { public: /** @brief 初始化为空模式;控制器在通用渲染容器创建后绑定。 */ nmWxPebiVolumeState() : m_pController(nullptr), m_pTask(nullptr), m_pProgress(nullptr), - m_pImportAction(nullptr), m_pReturnAction(nullptr), m_pButton(nullptr), + m_pImportAction(nullptr), m_pTestModelAction(nullptr), m_pReturnAction(nullptr), m_pButton(nullptr), m_pSliceAction(nullptr), m_pSliceSettingsAction(nullptr), m_pSliceDialog(nullptr), m_pSliceInteraction(nullptr), m_bImported(false), m_bPendingSync(false), m_bRegionVisible(false), m_bRegionDialogVisible(false) {} nmVolumeSceneController* m_pController; ///< 窗口独占,必须在渲染容器之前析构。 - nmVolumeImportTask* m_pTask; ///< 当前唯一导入线程,结束后才允许读取结果。 + nmVolumeImportTask* m_pTask; ///< 当前唯一模型加载线程,结束后才允许读取结果。 QProgressDialog* m_pProgress; ///< 临时进度框,窗口对象树拥有。 QAction* m_pImportAction; ///< 切片按钮菜单中的三维模型导入动作。 + QAction* m_pTestModelAction; ///< 直接加载内置切片测试模型,复用现有三维显示流程。 QAction* m_pReturnAction; ///< 仅外部模型模式启用的返回动作。 QToolButton* m_pButton; ///< 唯一新增的常驻切片工具按钮。 QAction* m_pSliceAction; ///< 切片按钮菜单中的切片显隐动作。 @@ -1128,7 +1129,7 @@ public: nmVolumeSliceInteraction* m_pSliceInteraction; ///< 窗口独占,负责辅助平面及安全事件转发。 nmVTKViewState m_oSavedView; ///< 第一次进入外部模式前捕获的计算结果视图。 nmVTKViewCommandController::ViewCommands m_eSavedCommands; ///< 原结果提供的视图命令能力。 - bool m_bImported; ///< 当前画面是否为外部三维模型。 + bool m_bImported; ///< 当前是否显示独立三维模型,包含文件导入和内置测试模型。 bool m_bPendingSync; ///< 外部模式期间发生 Manager 变化,返回时重新读取。 bool m_bRegionVisible; ///< 原区域轮廓的实际可见状态。 bool m_bRegionDialogVisible; ///< 原区域统计面板是否可见。 @@ -1988,6 +1989,8 @@ void nmWxPebiResultViewWidget::createUi() QMenu* pSliceMenu = new QMenu(m_pVolumeState->m_pButton); m_pVolumeState->m_pImportAction = new QAction(tr("Import 3D Model..."), this); m_pVolumeState->m_pImportAction->setObjectName(QLatin1String("importVolumeAction")); + m_pVolumeState->m_pTestModelAction = new QAction(tr("Load Slice Test Model"), this); + m_pVolumeState->m_pTestModelAction->setObjectName(QLatin1String("loadSliceTestModelAction")); m_pVolumeState->m_pReturnAction = new QAction(tr("Return to Calculation Result"), this); m_pVolumeState->m_pReturnAction->setObjectName(QLatin1String("returnCalculationAction")); m_pVolumeState->m_pSliceAction = new QAction(tr("Show Slice"), this); @@ -1996,6 +1999,7 @@ void nmWxPebiResultViewWidget::createUi() m_pVolumeState->m_pSliceSettingsAction = new QAction(tr("Slice Settings..."), this); m_pVolumeState->m_pSliceSettingsAction->setObjectName(QLatin1String("volumeSliceSettingsAction")); pSliceMenu->addAction(m_pVolumeState->m_pImportAction); + pSliceMenu->addAction(m_pVolumeState->m_pTestModelAction); pSliceMenu->addSeparator(); pSliceMenu->addAction(m_pVolumeState->m_pSliceAction); pSliceMenu->addAction(m_pVolumeState->m_pSliceSettingsAction); @@ -2004,6 +2008,7 @@ void nmWxPebiResultViewWidget::createUi() m_pVolumeState->m_pButton->setMenu(pSliceMenu); m_pToolBar->addWidget(m_pVolumeState->m_pButton); connect(m_pVolumeState->m_pImportAction, SIGNAL(triggered()), this, SLOT(onImportVolumeRequested())); + connect(m_pVolumeState->m_pTestModelAction, SIGNAL(triggered()), this, SLOT(onLoadSliceTestModelRequested())); connect(m_pVolumeState->m_pReturnAction, SIGNAL(triggered()), this, SLOT(onReturnToCalculationResult())); connect(m_pVolumeState->m_pSliceAction, SIGNAL(toggled(bool)), this, SLOT(onVolumeSliceToggled(bool))); connect(m_pVolumeState->m_pSliceSettingsAction, SIGNAL(triggered()), this, SLOT(onShowVolumeSliceSettings())); @@ -2649,7 +2654,9 @@ bool nmWxPebiResultViewWidget::canImportVolume() const void nmWxPebiResultViewWidget::synchronizeVolumeActions() { if(m_pVolumeState == nullptr || m_pVolumeState->m_pImportAction == nullptr) return; - m_pVolumeState->m_pImportAction->setEnabled(canImportVolume()); + const bool bCanLoad = canImportVolume(); + m_pVolumeState->m_pImportAction->setEnabled(bCanLoad); + m_pVolumeState->m_pTestModelAction->setEnabled(bCanLoad); m_pVolumeState->m_pImportAction->setText(isImportedVolumeMode() ? tr("Replace 3D Model...") : tr("Import 3D Model...")); m_pVolumeState->m_pReturnAction->setEnabled(isImportedVolumeMode() && m_pVolumeState->m_pTask == nullptr); @@ -2685,7 +2692,20 @@ void nmWxPebiResultViewWidget::onImportVolumeRequested() bool nmWxPebiResultViewWidget::importVolumeFile(const QString& sFilePath) { if(!isResultViewGuiThread() || sFilePath.isEmpty() || !canImportVolume()) return false; - m_pVolumeState->m_pTask = new nmVolumeImportTask(sFilePath, this); + startVolumeLoad(new nmVolumeImportTask(nmVolumeImportTask::FileSource, sFilePath, this)); + return true; +} + +void nmWxPebiResultViewWidget::onLoadSliceTestModelRequested() +{ + if(!isResultViewGuiThread() || !canImportVolume()) return; + // 与文件导入共享取消和提交路径,生成失败时保留原模型及其切片。 + startVolumeLoad(new nmVolumeImportTask(nmVolumeImportTask::SliceTestModelSource, QString(), this)); +} + +void nmWxPebiResultViewWidget::startVolumeLoad(nmVolumeImportTask* pTask) +{ + m_pVolumeState->m_pTask = pTask; m_pVolumeState->m_pProgress = new QProgressDialog(tr("Loading 3D model..."), tr("Cancel"), 0, 100, this); m_pVolumeState->m_pProgress->setObjectName(QLatin1String("volumeImportProgress")); m_pVolumeState->m_pProgress->setWindowModality(Qt::WindowModal); @@ -2700,7 +2720,6 @@ bool nmWxPebiResultViewWidget::importVolumeFile(const QString& sFilePath) m_pVolumeState->m_pProgress->show(); synchronizeBusinessActions(); m_pVolumeState->m_pTask->start(); - return true; } void nmWxPebiResultViewWidget::onCancelVolumeImport() diff --git a/Src/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.cpp b/Src/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.cpp index ca09c452..7ea41dd8 100644 --- a/Src/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.cpp +++ b/Src/nmNum/nmSubWxs/nmWxVolumeSliceSettingsDlg.cpp @@ -1,5 +1,4 @@ #include "nmWxVolumeSliceSettingsDlg.h" -#include "nmParameterField.h" #include "nmNumericDisplayFormat.h" #include #include @@ -21,7 +20,8 @@ nmWxVolumeSliceSettingsDlg::nmWxVolumeSliceSettingsDlg(QWidget* pParent) { createUi(); writeSettings(m_oApplied); - resize(minimumWidth(), sizeHint().height()); + // 与测量工具一致,由字体、主题和布局计算初始大小,后续仍允许用户调整窗口。 + adjustSize(); } void nmWxVolumeSliceSettingsDlg::createUi() @@ -36,8 +36,6 @@ void nmWxVolumeSliceSettingsDlg::createUi() setIgnoreEsc(false); // 六个分量各占一行,共用标签列和输入列;原点区与法向区分别放置对应快捷操作。 - const int nEditorHeight = nmParameterField::editorHeight(); - const int nEditorMinimumWidth = nmParameterField::editorMinimumWidth(); QGroupBox* pPlaneGroup = new QGroupBox(tr("Plane Parameters"), this); pPlaneGroup->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed); QGridLayout* pPlaneLayout = new QGridLayout(pPlaneGroup); @@ -45,15 +43,15 @@ void nmWxVolumeSliceSettingsDlg::createUi() pPlaneLayout->setHorizontalSpacing(6); pPlaneLayout->setVerticalSpacing(6); pPlaneLayout->setColumnStretch(1, 1); - int nFieldLabelWidth = 0; const char* pAxes[3] = { "X", "Y", "Z" }; for(int nAxis = 0; nAxis < 3; ++nAxis) { QLabel* pOriginLabel = new QLabel(tr("Origin %1").arg(QLatin1String(pAxes[nAxis])), pPlaneGroup); QLabel* pNormalLabel = new QLabel(tr("Normal %1").arg(QLatin1String(pAxes[nAxis])), pPlaneGroup); pOriginLabel->setAlignment(Qt::AlignRight | Qt::AlignVCenter); pNormalLabel->setAlignment(Qt::AlignRight | Qt::AlignVCenter); - nFieldLabelWidth = qMax(nFieldLabelWidth, - qMax(pOriginLabel->sizeHint().width(), pNormalLabel->sizeHint().width())); + // 标签列由布局按文字自然取宽;不缓存像素尺寸,便于适应字体和主题变化。 + pOriginLabel->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Fixed); + pNormalLabel->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Fixed); pPlaneLayout->addWidget(pOriginLabel, nAxis, 0); pPlaneLayout->addWidget(pNormalLabel, nAxis + 5, 0); m_pOriginEdits[nAxis] = new QLineEdit(pPlaneGroup); @@ -62,10 +60,7 @@ void nmWxVolumeSliceSettingsDlg::createUi() m_pNormalEdits[nAxis]->setObjectName(QString::fromLatin1("sliceNormal") + QLatin1String(pAxes[nAxis])); m_pOriginEdits[nAxis]->setAlignment(Qt::AlignLeft | Qt::AlignVCenter); m_pNormalEdits[nAxis]->setAlignment(Qt::AlignLeft | Qt::AlignVCenter); - m_pOriginEdits[nAxis]->setMinimumWidth(nEditorMinimumWidth); - m_pNormalEdits[nAxis]->setMinimumWidth(nEditorMinimumWidth); - m_pOriginEdits[nAxis]->setFixedHeight(nEditorHeight); - m_pNormalEdits[nAxis]->setFixedHeight(nEditorHeight); + // 横向随输入列伸展;纵向 Fixed 使用主题推荐高度,不指定固定像素高度。 m_pOriginEdits[nAxis]->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed); m_pNormalEdits[nAxis]->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed); pPlaneLayout->addWidget(m_pOriginEdits[nAxis], nAxis, 1); @@ -77,9 +72,9 @@ void nmWxVolumeSliceSettingsDlg::createUi() // 模型中心仅调整原点,放在原点 Z 下方,保持按钮紧凑并与输入框右边界对齐。 QToolButton* pCenterButton = new QToolButton(pPlaneGroup); pCenterButton->setText(tr("Model Center")); + pCenterButton->setToolTip(tr("Move the plane origin to the model center without changing its normal.")); pCenterButton->setAutoRaise(true); - pCenterButton->setMinimumWidth(72); - pCenterButton->setFixedHeight(nEditorHeight); + // 工具按钮按文字与主题计算尺寸,保持紧凑且不裁剪翻译后的标题。 pCenterButton->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed); pPlaneLayout->addWidget(pCenterButton, 3, 1, Qt::AlignRight); pPlaneLayout->setRowMinimumHeight(4, 6); @@ -102,10 +97,10 @@ void nmWxVolumeSliceSettingsDlg::createUi() for(int nPlane = 0; nPlane < 3; ++nPlane) { QToolButton* pButton = new QToolButton(pPlaneGroup); pButton->setText(QString::fromLatin1(pPlanes[nPlane])); + pButton->setToolTip(tr("Set the plane parallel to %1 without changing its origin.") + .arg(QString::fromLatin1(pPlanes[nPlane]))); pButton->setProperty("normalAxis", 2 - nPlane); pButton->setAutoRaise(true); - pButton->setMinimumWidth(44); - pButton->setFixedHeight(nEditorHeight); pButton->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed); pShortcutLayout->addWidget(pButton, 1); setTabOrder(pPreviousShortcutWidget, pButton); @@ -117,26 +112,19 @@ void nmWxVolumeSliceSettingsDlg::createUi() // 着色属性及渲染模式统一使用旧底栏;浮动窗口只保留平面相关的显示选项。 QGroupBox* pDisplayGroup = new QGroupBox(tr("Display Options"), this); pDisplayGroup->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed); - QGridLayout* pDisplayLayout = new QGridLayout(pDisplayGroup); + // 显示选项没有标签列,直接从分组左边距排列,避免沿用参数区的空列缩进。 + QHBoxLayout* pDisplayLayout = new QHBoxLayout(pDisplayGroup); pDisplayLayout->setContentsMargins(8, 15, 8, 10); - pDisplayLayout->setHorizontalSpacing(6); - pDisplayLayout->setVerticalSpacing(6); - pPlaneLayout->setColumnMinimumWidth(0, nFieldLabelWidth); - pDisplayLayout->setColumnMinimumWidth(0, nFieldLabelWidth); - pDisplayLayout->setColumnStretch(1, 1); + pDisplayLayout->setSpacing(12); m_pShowPlaneCheck = new QCheckBox(tr("Show Plane"), pDisplayGroup); m_pShowSourceCheck = new QCheckBox(tr("Show Original Model"), pDisplayGroup); m_pShowPlaneCheck->setObjectName(QLatin1String("sliceShowPlane")); m_pShowSourceCheck->setObjectName(QLatin1String("sliceShowSource")); // 拖动说明放在显示平面的悬停提示中,减少常驻文字对参数布局的干扰。 m_pShowPlaneCheck->setToolTip(tr("Drag the center or outline to move the plane; drag arrows to rotate.")); - QHBoxLayout* pDisplayOptionsLayout = new QHBoxLayout; - pDisplayOptionsLayout->setContentsMargins(0, 0, 0, 0); - pDisplayOptionsLayout->setSpacing(12); - pDisplayOptionsLayout->addWidget(m_pShowPlaneCheck); - pDisplayOptionsLayout->addWidget(m_pShowSourceCheck); - pDisplayOptionsLayout->addStretch(); - pDisplayLayout->addLayout(pDisplayOptionsLayout, 0, 1); + pDisplayLayout->addWidget(m_pShowPlaneCheck); + pDisplayLayout->addWidget(m_pShowSourceCheck); + pDisplayLayout->addStretch(); setTabOrder(pPreviousShortcutWidget, m_pShowPlaneCheck); setTabOrder(m_pShowPlaneCheck, m_pShowSourceCheck); connect(m_pShowPlaneCheck, SIGNAL(toggled(bool)), this, SLOT(onDisplayOptionsChanged())); @@ -154,24 +142,25 @@ void nmWxVolumeSliceSettingsDlg::createUi() pFooterLayout->setContentsMargins(4, 5, 4, 5); pFooterLayout->setSpacing(8); pFooterLayout->addStretch(); - QPushButton* pResetButton = new QPushButton(tr("Reset"), this); + QPushButton* pRestoreButton = new QPushButton(tr("Restore"), this); + // 还原仅撤销未应用的平面编辑,恢复最近一次成功应用的参数,不恢复初始截面。 + pRestoreButton->setToolTip(tr("Restore the last applied plane parameters.")); m_pApplyButton = new QPushButton(tr("Apply"), this); QPushButton* pCloseButton = new QPushButton(tr("Close"), this); m_pApplyButton->setObjectName(QLatin1String("sliceApplyButton")); m_pApplyButton->setDefault(true); - pResetButton->setAutoDefault(false); + pRestoreButton->setAutoDefault(false); pCloseButton->setAutoDefault(false); - pResetButton->setMinimumWidth(72); - m_pApplyButton->setMinimumWidth(72); - pCloseButton->setMinimumWidth(72); pCloseButton->setIcon(zxLoadIcon("Cancel")); - pCloseButton->setIconSize(QSize(16, 16)); - pFooterLayout->addWidget(pResetButton); + pFooterLayout->addWidget(pRestoreButton); pFooterLayout->addWidget(m_pApplyButton); pFooterLayout->addWidget(pCloseButton); connect(m_pApplyButton, SIGNAL(clicked()), this, SLOT(onApplyRequested())); - connect(pResetButton, SIGNAL(clicked()), this, SLOT(onResetRequested())); + connect(pRestoreButton, SIGNAL(clicked()), this, SLOT(onRestoreRequested())); connect(pCloseButton, SIGNAL(clicked()), this, SLOT(close())); + setTabOrder(m_pShowSourceCheck, pRestoreButton); + setTabOrder(pRestoreButton, m_pApplyButton); + setTabOrder(m_pApplyButton, pCloseButton); QVBoxLayout* pMainLayout = new QVBoxLayout(this); pMainLayout->setContentsMargins(12, 10, 12, 0); @@ -179,9 +168,9 @@ void nmWxVolumeSliceSettingsDlg::createUi() pMainLayout->addWidget(pPlaneGroup); pMainLayout->addWidget(pDisplayGroup); pMainLayout->addWidget(m_pErrorLabel); + // 初始高度按内容收紧;手动纵向拉伸的余量留在底部,不拉长输入框或分组行距。 pMainLayout->addStretch(); pMainLayout->addLayout(pFooterLayout); - setMinimumWidth(400); } void nmWxVolumeSliceSettingsDlg::setData(const QSharedPointer& pData, const nmVolumeSliceSettings& oApplied) @@ -198,7 +187,7 @@ void nmWxVolumeSliceSettingsDlg::setAppliedSettings(const nmVolumeSliceSettings& void nmWxVolumeSliceSettingsDlg::setAppliedProperty(const QString& sPropertyId) { - // 底栏属性立即生效;重置、关闭窗口及再次应用平面时也应继续使用此属性。 + // 底栏属性立即生效;还原、关闭窗口及再次应用平面时也应继续使用此属性。 m_oApplied.m_sPropertyId = sPropertyId; } @@ -313,7 +302,7 @@ void nmWxVolumeSliceSettingsDlg::onCenterRequested() onDraftChanged(); } -void nmWxVolumeSliceSettingsDlg::onResetRequested() +void nmWxVolumeSliceSettingsDlg::onRestoreRequested() { writeSettings(m_oApplied); emit previewChanged();