fix(nmNum): 修复压裂井参数单位绑定

- 将排水角度和裂缝角度单位统一为 deg
- 补充 mD.m 流动能力单位组
- 修复裂缝角度和导流能力数值显示为空的问题

Bin/XmlFiles/ModelParaDefinesNM_cn.xml

@@ -35,10 +35,10 @@
     <ParaItem Name="W_Skin" Alias="表皮系数"    Unit=""     Default="0"     Max="1000"   Min="-100"   Digit="6"  Desc="skin factor" />
     <ParaItem Name="W_C"    Alias="井筒储集系数" Unit="m^3/MPa" Default="0" Max="1000"   Min="0"      Digit="6"  Desc="wellbore storage coefficient" />
     <ParaItem Name="W_WellLength"         Alias="水平段长度"   Unit="m"    Default="200"  Max="10000" Min="1e-05" Digit="6" Desc="horizontal well length" />
-    <ParaItem Name="W_DrainAngle"         Alias="排水角度"     Unit="°"    Default="0"    Max="360"   Min="-360"  Digit="6" Desc="horizontal well drain angle" />
+    <ParaItem Name="W_DrainAngle"         Alias="排水角度"     Unit="deg"  Default="0"    Max="360"   Min="-360"  Digit="6" Desc="horizontal well drain angle" />
     <ParaItem Name="W_NumberOfFractures"  Alias="裂缝数量"     Unit=""     Default="15"   Max="1000"  Min="2"     Digit="0" Desc="number of fractures" />
     <ParaItem Name="W_FractureHalfLength" Alias="裂缝半长"     Unit="m"    Default="50"   Max="10000" Min="1e-05" Digit="6" Desc="fracture half-length" />
-    <ParaItem Name="W_FractureAngle"      Alias="裂缝角度"     Unit="°"    Default="90"   Max="360"   Min="-360"  Digit="6" Desc="fracture angle" />
+    <ParaItem Name="W_FractureAngle"      Alias="裂缝角度"     Unit="deg"  Default="90"   Max="360"   Min="-360"  Digit="6" Desc="fracture angle" />
     <ParaItem Name="W_Dfc"                Alias="裂缝导流能力" Unit="mD.m" Default="1000" Max="1e+30" Min="0"     Digit="6" Desc="fracture conductivity" />
   </ParaGroup>
 

Bin/XmlFiles/ModelParaDefinesNM_en.xml

@@ -36,10 +36,10 @@
     <ParaItem Name="W_Skin" Alias="Skin Factor"             Unit=""       Default="0"     Max="1000"   Min="-100"   Digit="6"  Desc="skin factor" />
     <ParaItem Name="W_C"    Alias="Wellbore Storage Coeff"  Unit="m^3/MPa" Default="0"     Max="1000"   Min="0"      Digit="6"  Desc="wellbore storage coefficient" />
     <ParaItem Name="W_WellLength"         Alias="Horizontal Well Length" Unit="m"    Default="200"  Max="10000" Min="1e-05" Digit="6" Desc="horizontal well length" />
-    <ParaItem Name="W_DrainAngle"         Alias="Drain Angle"            Unit="°"    Default="0"    Max="360"   Min="-360"  Digit="6" Desc="horizontal well drain angle" />
+    <ParaItem Name="W_DrainAngle"         Alias="Drain Angle"            Unit="deg"  Default="0"    Max="360"   Min="-360"  Digit="6" Desc="horizontal well drain angle" />
     <ParaItem Name="W_NumberOfFractures"  Alias="Number of Fractures"    Unit=""     Default="15"   Max="1000"  Min="2"     Digit="0" Desc="number of fractures" />
     <ParaItem Name="W_FractureHalfLength" Alias="Fracture Half-Length"   Unit="m"    Default="50"   Max="10000" Min="1e-05" Digit="6" Desc="fracture half-length" />
-    <ParaItem Name="W_FractureAngle"      Alias="Fracture Angle"         Unit="°"    Default="90"   Max="360"   Min="-360"  Digit="6" Desc="fracture angle" />
+    <ParaItem Name="W_FractureAngle"      Alias="Fracture Angle"         Unit="deg"  Default="90"   Max="360"   Min="-360"  Digit="6" Desc="fracture angle" />
     <ParaItem Name="W_Dfc"                Alias="Fracture Conductivity"  Unit="mD.m" Default="1000" Max="1e+30" Min="0"     Digit="6" Desc="fracture conductivity" />
   </ParaGroup>
 

Bin/XmlFiles/UnitDefault_cn.xml

@@ -331,10 +331,18 @@
             <Unit ID="U3206" Unit="kgf.s/m^3" k="9.80665"/>
         </UnitGroup>
 
+
+        <!-- ==================== 以下为数值试井模块补充扩展单位 ==================== -->
+
         <!-- ==================== 第33组：井筒储集系数 ==================== -->
         <UnitGroup Type="ToDo3" Name="ToDo3">
             <Unit ID="U3301" Unit="m^3/MPa" k="1" Digit="6" Remark="base unit"/>
         </UnitGroup>
 
+        <!-- ==================== 第34组：流动能力 ==================== -->
+        <UnitGroup Type="flow_capacity" Name="flow_capacity">
+            <Unit ID="U3401" Unit="mD.m" k="1" Digit="6" Remark="base unit"/>
+        </UnitGroup>
+
     </TypeOf>
 </Root>