fix(nmNum): 修正流量数据读取并优化包含井表格

- 按 GaugeDataEx2 实际内容判断单相与多相流量
- 将多相数据中的空相按零流量处理
- 优化包含井表格样式、序号和自适应尺寸
- 隐藏不可用的压力流量下拉项
- 更新中文翻译文件

Include/nmNum/nmData/nmDataGaugeRecord.h

@@ -1,4 +1,4 @@
-#pragma once
+#pragma once
 
 #include "nmDefines.h"
 
@@ -26,14 +26,14 @@ struct nmPressureGaugeRecord {
 
 /**
  * @brief 工程井下一条流量测量记录的只读快照。
- * @note 单相记录解析 GaugeData 并按井别归入对应相；多相记录从
- *       GaugeDataEx2 的 N 行数据中按 [段时长、油、气、水] 解析全部相。
+ * @note GaugeDataEx2 非空时按 N 行 [段时长、油、气、水] 解析多相数据；
+ *       否则解析 GaugeData，并按井别归入对应的单相流量。
  */
 struct nmFlowGaugeRecord {
 	QString sGaugeCode;                 // 对应 ZxDataGaugeF::getCode()，选择持久化键
 	QString sGaugeName;                 // 对应 ZxDataGaugeF::getGaugeName()，界面展示用
 	QString sGaugeTime;                 // 对应 ZxDataGaugeF::getGaugeTime()，界面展示用
-	bool bMultiPhase;                   // 对应 ZxDataGaugeF::getMultiPhase()
+	bool bMultiPhase;                   // 实际是否采用 GaugeDataEx2 多相表，不依赖框架多相标志
 	NM_GAUGE_RECORD_STATUS eStatus;     // 记录可用状态
 	QVector<QPointF> vecOilPoints;      // 油相流量点，允许首项为 (0,0) 占位点
 	QVector<QPointF> vecGasPoints;      // 气相流量点，允许首项为 (0,0) 占位点

Include/nmNum/nmSubWxs/nmWxIncludeOtherWells.h

@@ -82,6 +82,8 @@ private:
 	void setupLayouts();
 	/** @brief 连接按钮及表格交互信号。 */
 	void setupConnections();
+	/** @brief 根据列宽和候选井数量设置受屏幕范围约束的初始窗口尺寸。 */
+	void adjustDialogSizeToTable();
 
 	/** @brief 将一条候选井数据写入指定表格行。 */
 	void addWellDataToTable(const WellDataRow& data, int row);

Src/nmNum/nmData/nmDataAnalyzeManager.cpp

@@ -18,6 +18,7 @@
 #include "ZxBaseUtil.h"
 #include <QSet>
 #include <QThread>
+#include <QVariant>
 #include "zxLogInstance.h"
 
 #include "nmDataReservoir.h"
@@ -192,6 +193,21 @@ static NM_GAUGE_RECORD_STATUS readBlockAndClassify(
             ? NM_GaugeRecord_Usable : NM_GaugeRecord_Corrupt;
 }
 
+// 油水等非全相记录会把未使用相保存为空单元格，数值层按零产量接收。
+// 非空内容仍必须是有效数字，避免把真正损坏的数据静默转换为零。
+static bool readOptionalPhaseRate(const QVariant& oValue, double& dRate)
+{
+    if(!oValue.isValid() || oValue.isNull() ||
+       oValue.toString().trimmed().isEmpty()) {
+        dRate = 0.0;
+        return true;
+    }
+
+    bool bOk = false;
+    dRate = oValue.toDouble(&bOk);
+    return bOk;
+}
+
 // 框架的 GaugeDataEx2 保存完整多相表，格式为 N 行 x 4 列；
 // 每行依次为 [段时长、油、气、水]。数值模块读取时拆成三组同轴流量点，
 // 不根据井别或非零值删改任一相的数据。
@@ -231,14 +247,14 @@ static bool readMultiPhaseFlowTable(
         nPointIndex < nPointCount;
         ++nPointIndex) {
         bool bTimeOk = false;
-        bool bOilOk = false;
-        bool bGasOk = false;
-        bool bWaterOk = false;
         const QVector<QVariant>& vecRow = vvecRows[nPointIndex];
         const double dTime = vecRow[0].toDouble(&bTimeOk);
-        const double dOil = vecRow[1].toDouble(&bOilOk);
-        const double dGas = vecRow[2].toDouble(&bGasOk);
-        const double dWater = vecRow[3].toDouble(&bWaterOk);
+        double dOil = 0.0;
+        double dGas = 0.0;
+        double dWater = 0.0;
+        const bool bOilOk = readOptionalPhaseRate(vecRow[1], dOil);
+        const bool bGasOk = readOptionalPhaseRate(vecRow[2], dGas);
+        const bool bWaterOk = readOptionalPhaseRate(vecRow[3], dWater);
         if(!bTimeOk || !bOilOk || !bGasOk || !bWaterOk) {
             vecOilPoints.clear();
             vecGasPoints.clear();
@@ -400,7 +416,9 @@ bool nmDataAnalyzeManager::readFrameworkWellCurves(
         oRecord.sGaugeCode = pGaugeF->getCode();
         oRecord.sGaugeName = pGaugeF->getGaugeName();
         oRecord.sGaugeTime = pGaugeF->getGaugeTime();
-        oRecord.bMultiPhase = pGaugeF->getMultiPhase();
+        // 框架多相标志可能与实际存储不一致，正式读取只依据数据块：
+        // Ex2 非空表示多相表，否则按井别解析 GaugeData 单相主块。
+        oRecord.bMultiPhase = !pGaugeF->getGaugeDataEx2().isEmpty();
         oRecord.eStatus = oRecord.bMultiPhase
                 ? classifyMultiPhaseFlowRecord(
                       pGaugeF, oRecord.vecOilPoints,

Src/nmNum/nmSubWxs/nmWxIncludeOtherWells.cpp

@@ -3,10 +3,11 @@
 #include "nmDataWellBase.h"
 
 #include <QAbstractItemView>
+#include <QApplication>
 #include <QCheckBox>
+#include <QDesktopWidget>
 #include <QHBoxLayout>
-#include <QStandardItem>
-#include <QStandardItemModel>
+#include <QStyle>
 #include <QWidget>
 
 namespace
@@ -124,37 +125,6 @@ QString gaugeRecordLabel(const QString& sGaugeName,
 	return sLabel;
 }
 
-// 异常记录仍显示在下拉列表中，后缀用于说明其不可用于当前选择的原因。
-QString recordStatusSuffix(NM_GAUGE_RECORD_STATUS eStatus)
-{
-	switch(eStatus) {
-	case NM_GaugeRecord_Empty:
-		return nmWxIncludeOtherWells::tr(" (Empty)");
-	case NM_GaugeRecord_Corrupt:
-		return nmWxIncludeOtherWells::tr(" (Corrupt)");
-	case NM_GaugeRecord_InvalidIdentity:
-		return nmWxIncludeOtherWells::tr(" (Invalid)");
-	default:
-		return QString();
-	}
-}
-
-// Qt 4.8 的 QComboBox 没有直接禁用单项的接口，通过其标准项模型设置标志。
-void setComboItemEnabled(QComboBox* pComboBox, int nIndex, bool bEnabled)
-{
-	QStandardItemModel* pModel = qobject_cast<QStandardItemModel*>(
-			pComboBox == nullptr ? nullptr : pComboBox->model());
-	QStandardItem* pItem = pModel == nullptr ? nullptr : pModel->item(nIndex);
-	if(pItem == nullptr) {
-		return;
-	}
-	if(bEnabled) {
-		pItem->setFlags(pItem->flags() | Qt::ItemIsEnabled);
-	} else {
-		pItem->setFlags(pItem->flags() & ~Qt::ItemIsEnabled);
-	}
-}
-
 // 流动段索引是一基索引；统计段数时必须先排除框架可能写入的公共占位行。
 int flowRecordSegmentCount(const nmFlowGaugeRecord& oRecord)
 {
@@ -252,9 +222,9 @@ void nmWxIncludeOtherWells::initUI()
 	this->setupConnections();
 
 	this->setWindowTitle(tr("Include Other Wells"));
-	// 缩小时依靠横向滚动保留稳定列宽，不让中英文标题挤压下拉内容。
-	this->setMinimumSize(760, 280);
-	this->resize(1240, 420);
+	// 初始尺寸跟随列宽和井数量，手动缩小时仍由滚动条保护表头及下拉内容。
+	this->setMinimumSize(720, 240);
+	this->adjustDialogSizeToTable();
 }
 
 void nmWxIncludeOtherWells::setupTable()
@@ -262,14 +232,54 @@ void nmWxIncludeOtherWells::setupTable()
 	m_pTableWidget = new QTableWidget(this);
 	m_pTableWidget->setColumnCount(ColumnCount);
 	m_pTableWidget->setRowCount(0);
-	m_pTableWidget->setSelectionBehavior(QAbstractItemView::SelectRows);
-	m_pTableWidget->setSelectionMode(QAbstractItemView::SingleSelection);
+	// 本表以复选框和下拉框作为操作入口，不使用表格行选中态。
+	m_pTableWidget->setSelectionMode(QAbstractItemView::NoSelection);
+	m_pTableWidget->setFocusPolicy(Qt::NoFocus);
 	m_pTableWidget->setEditTriggers(QAbstractItemView::NoEditTriggers);
+	m_pTableWidget->setSortingEnabled(false);
+	m_pTableWidget->setDragEnabled(false);
+	m_pTableWidget->setAcceptDrops(false);
+	m_pTableWidget->setDropIndicatorShown(false);
 	m_pTableWidget->setAlternatingRowColors(true);
 	m_pTableWidget->setWordWrap(false);
 	m_pTableWidget->setHorizontalScrollMode(QAbstractItemView::ScrollPerPixel);
 	m_pTableWidget->setVerticalScrollMode(QAbstractItemView::ScrollPerPixel);
 
+	// 与编辑井流量明细表使用相同的调色板、表头和网格边框。
+	// 表格内下拉框采用透明无边框样式，使交替行色连续显示。
+	m_pTableWidget->setStyleSheet(
+			"QTableWidget {"
+			"    background-color: palette(base);"
+			"    alternate-background-color: rgb(232, 232, 232);"
+			"    gridline-color: palette(midlight);"
+			"    border: 1px solid palette(mid);"
+			"}"
+			"QHeaderView {"
+			"    background-color: palette(button);"
+			"    color: palette(button-text);"
+			"}"
+			"QHeaderView::section {"
+			"    background-color: palette(button);"
+			"    color: palette(button-text);"
+			"    border: none;"
+			"    border-right: 1px solid palette(mid);"
+			"    border-bottom: 1px solid palette(mid);"
+			"}"
+			"QTableCornerButton::section {"
+			"    background-color: palette(base);"
+			"    border: none;"
+			"    border-right: 1px solid palette(mid);"
+			"    border-bottom: 1px solid palette(mid);"
+			"}"
+			"QTableWidget QComboBox {"
+			"    border: none;"
+			"    background: transparent;"
+			"    padding-left: 6px;"
+			"}"
+			"QTableWidget QComboBox::drop-down {"
+			"    border: none;"
+			"}");
+
 	QStringList listHeaders;
 	listHeaders << tr("Name") << tr("Well category") << tr("Included")
 			<< tr("Oil production") << tr("Gas production")
@@ -277,6 +287,7 @@ void nmWxIncludeOtherWells::setupTable()
 			<< tr("Flow segment");
 	m_pTableWidget->setHorizontalHeaderLabels(listHeaders);
 	m_pTableWidget->horizontalHeader()->setVisible(true);
+	m_pTableWidget->horizontalHeader()->setMovable(false);
 	m_pTableWidget->horizontalHeader()->setMinimumSectionSize(64);
 	m_pTableWidget->horizontalHeader()->setStretchLastSection(false);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
@@ -284,25 +295,21 @@ void nmWxIncludeOtherWells::setupTable()
 	m_pTableWidget->horizontalHeader()->setResizeMode(
 			ColumnWellCategory, QHeaderView::ResizeToContents);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
-			ColumnIncluded, QHeaderView::Fixed);
+			ColumnIncluded, QHeaderView::ResizeToContents);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
-			ColumnOilRate, QHeaderView::Interactive);
+			ColumnOilRate, QHeaderView::ResizeToContents);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
-			ColumnGasRate, QHeaderView::Interactive);
+			ColumnGasRate, QHeaderView::ResizeToContents);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
-			ColumnWaterRate, QHeaderView::Interactive);
+			ColumnWaterRate, QHeaderView::ResizeToContents);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
-			ColumnPressure, QHeaderView::Interactive);
+			ColumnPressure, QHeaderView::ResizeToContents);
 	m_pTableWidget->horizontalHeader()->setResizeMode(
-			ColumnFlowSegment, QHeaderView::Fixed);
-	m_pTableWidget->setColumnWidth(ColumnIncluded, 76);
-	m_pTableWidget->setColumnWidth(ColumnOilRate, 180);
-	m_pTableWidget->setColumnWidth(ColumnGasRate, 180);
-	m_pTableWidget->setColumnWidth(ColumnWaterRate, 180);
-	m_pTableWidget->setColumnWidth(ColumnPressure, 190);
-	m_pTableWidget->setColumnWidth(ColumnFlowSegment, 96);
-
-	m_pTableWidget->verticalHeader()->setVisible(false);
+			ColumnFlowSegment, QHeaderView::ResizeToContents);
+
+	m_pTableWidget->verticalHeader()->setVisible(true);
+	m_pTableWidget->verticalHeader()->setMovable(false);
+	m_pTableWidget->verticalHeader()->setDefaultAlignment(Qt::AlignCenter);
 	m_pTableWidget->verticalHeader()->setDefaultSectionSize(32);
 	m_pTableWidget->verticalHeader()->setMinimumSectionSize(28);
 
@@ -396,7 +403,73 @@ void nmWxIncludeOtherWells::setupTable()
 		pEmptyItem->setFlags(Qt::NoItemFlags);
 		pEmptyItem->setTextAlignment(Qt::AlignCenter);
 		m_pTableWidget->setItem(0, 0, pEmptyItem);
+		// 空状态行不是候选井，不显示容易产生误解的行号“1”。
+		m_pTableWidget->verticalHeader()->setVisible(false);
+	} else {
+		// Qt 默认按一基显示纵向表头；宽度随最大行号位数增长。
+		const int nRowNumberWidth = m_pTableWidget->fontMetrics().width(
+				QString::number(m_vecWellData.size())) + 18;
+		m_pTableWidget->verticalHeader()->setFixedWidth(
+				qMax(32, nRowNumberWidth));
+	}
+	// 单元格控件全部创建完成后再按真实表头和下拉内容计算列宽。
+	m_pTableWidget->resizeColumnsToContents();
+}
+
+void nmWxIncludeOtherWells::adjustDialogSizeToTable()
+{
+	if(m_pTableWidget == nullptr || m_pMainLayout == nullptr) {
+		return;
+	}
+
+	int nTableWidth = m_pTableWidget->frameWidth() * 2;
+	if(m_pTableWidget->verticalHeader()->isVisible()) {
+		nTableWidth += m_pTableWidget->verticalHeader()->width();
 	}
+	for(int nColumn = 0; nColumn < ColumnCount; ++nColumn) {
+		nTableWidth += m_pTableWidget->columnWidth(nColumn);
+	}
+
+	const int nVisibleRows = qMin(qMax(1, m_pTableWidget->rowCount()), 10);
+	int nTableHeight = m_pTableWidget->frameWidth() * 2 +
+			m_pTableWidget->horizontalHeader()->sizeHint().height() +
+			nVisibleRows * m_pTableWidget->verticalHeader()->defaultSectionSize();
+	const int nScrollBarExtent = style()->pixelMetric(QStyle::PM_ScrollBarExtent);
+	if(m_pTableWidget->rowCount() > nVisibleRows) {
+		nTableWidth += nScrollBarExtent;
+	}
+
+	int nLeft = 0;
+	int nTop = 0;
+	int nRight = 0;
+	int nBottom = 0;
+	m_pMainLayout->getContentsMargins(&nLeft, &nTop, &nRight, &nBottom);
+	const int nLayoutWidth = nLeft + nRight;
+	const int nButtonHeight = qMax(m_pOkButton->sizeHint().height(),
+			m_pCancelButton->sizeHint().height());
+	const int nLayoutHeight = nTop + nBottom + nButtonHeight +
+			m_pMainLayout->spacing();
+
+	QRect oAvailableGeometry;
+	QDesktopWidget* pDesktop = QApplication::desktop();
+	if(pDesktop != nullptr) {
+		oAvailableGeometry = pDesktop->availableGeometry(this);
+	}
+	if(!oAvailableGeometry.isValid()) {
+		oAvailableGeometry = QRect(0, 0, 1280, 720);
+	}
+
+	const int nMaximumWidth = qMax(640, oAvailableGeometry.width() * 9 / 10);
+	const int nMaximumHeight = qMax(260, oAvailableGeometry.height() * 4 / 5);
+	int nDialogWidth = qMin(nTableWidth + nLayoutWidth, nMaximumWidth);
+	if(nTableWidth + nLayoutWidth > nDialogWidth) {
+		nTableHeight += nScrollBarExtent;
+	}
+	const int nDialogHeight = qMin(nTableHeight + nLayoutHeight,
+			nMaximumHeight);
+
+	resize(qMax(minimumWidth(), nDialogWidth),
+			qMax(minimumHeight(), nDialogHeight));
 }
 
 void nmWxIncludeOtherWells::addWellDataToTable(
@@ -405,6 +478,7 @@ void nmWxIncludeOtherWells::addWellDataToTable(
 	QTableWidgetItem* pNameItem = new QTableWidgetItem(data.m_sName);
 	pNameItem->setData(Qt::UserRole, data.m_sWellCode);
 	pNameItem->setTextAlignment(Qt::AlignLeft | Qt::AlignVCenter);
+	pNameItem->setToolTip(data.m_sName);
 	m_pTableWidget->setItem(row, ColumnName, pNameItem);
 
 	QTableWidgetItem* pCategoryItem = new QTableWidgetItem(
@@ -433,6 +507,7 @@ void nmWxIncludeOtherWells::addWellDataToTable(
 		QComboBox* pRateCombo = new QComboBox(m_pTableWidget);
 		pRateCombo->setProperty("row", row);
 		pRateCombo->setProperty("phase", static_cast<int>(arrPhases[nIndex]));
+		pRateCombo->setSizeAdjustPolicy(QComboBox::AdjustToContents);
 		pRateCombo->setMaxVisibleItems(16);
 		connect(pRateCombo, SIGNAL(currentIndexChanged(int)),
 				this, SLOT(onRateSourceChanged(int)));
@@ -441,6 +516,7 @@ void nmWxIncludeOtherWells::addWellDataToTable(
 
 	QComboBox* pPressureCombo = new QComboBox(m_pTableWidget);
 	pPressureCombo->setProperty("row", row);
+	pPressureCombo->setSizeAdjustPolicy(QComboBox::AdjustToContents);
 	pPressureCombo->setMaxVisibleItems(16);
 	connect(pPressureCombo, SIGNAL(currentIndexChanged(int)),
 			this, SLOT(onPressureSourceChanged(int)));
@@ -448,6 +524,7 @@ void nmWxIncludeOtherWells::addWellDataToTable(
 
 	QComboBox* pSegmentCombo = new QComboBox(m_pTableWidget);
 	pSegmentCombo->setProperty("row", row);
+	pSegmentCombo->setSizeAdjustPolicy(QComboBox::AdjustToContents);
 	connect(pSegmentCombo, SIGNAL(currentIndexChanged(int)),
 			this, SLOT(onFlowSegmentChanged(int)));
 	m_pTableWidget->setCellWidget(row, ColumnFlowSegment, pSegmentCombo);
@@ -512,18 +589,15 @@ void nmWxIncludeOtherWells::populateRateCombo(
 	pComboBox->clear();
 	pComboBox->addItem(tr("None"), QString());
 
-	// 三个分相下拉框都列出完整记录集合，但当前相无数据的记录保持可见且禁用。
+	// 选择控件只展示当前相真正可用的记录；异常记录仍可在“检查数据”中查看。
 	for(int nIndex = 0; nIndex < data.m_vecFlowRecords.size(); ++nIndex) {
 		const nmFlowGaugeRecord& oRecord = data.m_vecFlowRecords[nIndex];
-		const bool bSelectable = isSelectableFlowPhase(oRecord, ePhase);
-		QString sLabel = gaugeRecordLabel(
-				oRecord.sGaugeName, oRecord.sGaugeCode, oRecord.sGaugeTime);
-		sLabel += recordStatusSuffix(oRecord.eStatus);
-		if(oRecord.eStatus == NM_GaugeRecord_Usable && !bSelectable) {
-			sLabel += tr(" (No data)");
+		if(!isSelectableFlowPhase(oRecord, ePhase)) {
+			continue;
 		}
-		pComboBox->addItem(sLabel, oRecord.sGaugeCode);
-		setComboItemEnabled(pComboBox, pComboBox->count() - 1, bSelectable);
+		pComboBox->addItem(gaugeRecordLabel(
+				oRecord.sGaugeName, oRecord.sGaugeCode, oRecord.sGaugeTime),
+				oRecord.sGaugeCode);
 	}
 
 	int nCurrentIndex = 0;
@@ -549,15 +623,12 @@ void nmWxIncludeOtherWells::populatePressureCombo(
 	pComboBox->addItem(tr("None"), QString());
 	for(int nIndex = 0; nIndex < data.m_vecPressureRecords.size(); ++nIndex) {
 		const nmPressureGaugeRecord& oRecord = data.m_vecPressureRecords[nIndex];
-		const bool bSelectable = isSelectablePressureRecord(oRecord);
-		QString sLabel = gaugeRecordLabel(
-				oRecord.sGaugeName, oRecord.sGaugeCode, oRecord.sGaugeTime);
-		sLabel += recordStatusSuffix(oRecord.eStatus);
-		if(oRecord.eStatus == NM_GaugeRecord_Usable && !bSelectable) {
-			sLabel += tr(" (No data)");
+		if(!isSelectablePressureRecord(oRecord)) {
+			continue;
 		}
-		pComboBox->addItem(sLabel, oRecord.sGaugeCode);
-		setComboItemEnabled(pComboBox, pComboBox->count() - 1, bSelectable);
+		pComboBox->addItem(gaugeRecordLabel(
+				oRecord.sGaugeName, oRecord.sGaugeCode, oRecord.sGaugeTime),
+				oRecord.sGaugeCode);
 	}
 
 	const int nCurrentIndex = pComboBox->findData(
@@ -656,7 +727,6 @@ void nmWxIncludeOtherWells::onCheckBoxStateChanged(int state)
 		return;
 	}
 	oData.m_bIsIncluded = state == Qt::Checked;
-	m_pTableWidget->selectRow(nRow);
 }
 
 void nmWxIncludeOtherWells::onRateSourceChanged(int nIndex)
@@ -695,7 +765,6 @@ void nmWxIncludeOtherWells::onRateSourceChanged(int nIndex)
 	// 自动使用同一记录；新记录没有的相自动回到“无”。
 	normalizeFlowSelection(oData);
 	refreshRowEditors(nRow);
-	m_pTableWidget->selectRow(nRow);
 }
 
 void nmWxIncludeOtherWells::onPressureSourceChanged(int nIndex)
@@ -711,7 +780,6 @@ void nmWxIncludeOtherWells::onPressureSourceChanged(int nIndex)
 	m_vecWellData[nRow].m_sPressureGaugeCode =
 			pComboBox->itemData(nIndex).toString();
 	pComboBox->setToolTip(pComboBox->currentText());
-	m_pTableWidget->selectRow(nRow);
 }
 
 void nmWxIncludeOtherWells::onFlowSegmentChanged(int nIndex)
@@ -727,7 +795,6 @@ void nmWxIncludeOtherWells::onFlowSegmentChanged(int nIndex)
 	m_vecWellData[nRow].m_nFlowSegmentIndex =
 			pComboBox->itemData(nIndex).toInt();
 	pComboBox->setToolTip(pComboBox->currentText());
-	m_pTableWidget->selectRow(nRow);
 }
 
 QVector<WellDataRow> nmWxIncludeOtherWells::getWellData() const
@@ -749,7 +816,7 @@ void nmWxIncludeOtherWells::setupLayouts()
 	m_pButtonLayout->addWidget(m_pCancelButton);
 
 	m_pMainLayout = new QVBoxLayout(this);
-	m_pMainLayout->addWidget(m_pTableWidget);
+	m_pMainLayout->addWidget(m_pTableWidget, 1);
 	m_pMainLayout->addLayout(m_pButtonLayout);
 	setLayout(m_pMainLayout);
 }