feat(nmNum): 实现单井单相分段产量预测及主界面结果展示

Include/nmNum/nmCalculation/nmCalculationDllPebiSolverTask.h

@@ -78,6 +78,11 @@ class NMCALCULATION_EXPORT nmCalculationDllPebiSolverTask : public QThread {
 
     /** @brief 返回自动拟合目标井的原始压力结果副本。 */
     QVector<QVector<double> > getAutoFitResultPressure() const;
+    /** @brief 启动前设置单井单相预测制度；单位为 MPa、hr、m^3/D，仅修改任务副本。 */
+    bool configureRateForecast(double initialPressure, const QVector<double>& durations,
+                               const QVector<double>& rates);
+    /** @brief 线程结束后读取预测时间（hr）和井底压力（MPa），不生成试井诊断曲线。 */
+    QVector<QVector<double> > getRateForecastPressure() const;
     /** @brief 返回自动拟合目标井的双对数结果副本。 */
     QVector<QVector<double> > getAutoFitResultLogLog() const;
     /** @brief 返回自动拟合目标井的半对数结果副本。 */

Include/nmNum/nmSubWnd/nmSubWndMain.h

@@ -91,6 +91,8 @@ class NM_SUB_WND_EXPORT nmSubWndMain : public iSubWndBaseFit {
 
   protected:
 
+    bool eventFilter(QObject* watched, QEvent* event);
+
     // 绑定图形信号
     virtual void bindChartSignals(iGuiPlot* pWxPlot);
 
@@ -168,6 +170,13 @@ class NM_SUB_WND_EXPORT nmSubWndMain : public iSubWndBaseFit {
     void onSensitivityTaskDestroyed();
     /** @brief 在框架已有的敏感性子窗口叠加显示本分析的双对数结果。 */
     void onShowSensitiveResults();
+    // 预测结果复用所属分析内的 MDI 子窗口，模型变化时移除旧结果。
+    void onShowForecastResult(const QString& wellName, const QVector<double>& times,
+                              const QVector<double>& pressures, const QVector<double>& durations,
+                              const QVector<double>& rates);
+    void clearForecastResult();
+    void syncForecastTimeAxis(double minimum, double maximum, bool recalcTicks, bool adjustZoom);
+    void fitForecastViews();
     void onSensitiveFilterChanged();
     void onSensitiveShowClicked();
     /** @brief 刷新主界面的误差直方图，修改分箱数时复用当前批次结果。 */

Include/nmNum/nmSubWxs/nmWxForecast.h

@@ -13,17 +13,30 @@
 #include <QStackedWidget>
 #include <QTableWidget>
 #include <QComboBox>
+#include <QPointer>
 #include "nmDataForecast.h"
 #include "nmGUIComponentLineEdit.h"
 #include "nmDataAnalyzeManager.h"
 
+class nmCalculationDllPebiSolverTask;
+class QProgressDialog;
+
 class nmWxForecast : public iDlgBase
 {
     Q_OBJECT
 public:
-    explicit nmWxForecast(QWidget *parent = 0);
+    explicit nmWxForecast(QWidget *parent = 0, nmDataAnalyzeManager* manager = 0);
     ~nmWxForecast();
 
+signals:
+    // 计算完成后由所属分析主界面承载结果，输入窗口不持有结果窗口。
+    void sigForecastReady(const QString& wellName, const QVector<double>& times,
+                          const QVector<double>& pressures, const QVector<double>& durations,
+                          const QVector<double>& rates);
+
+public slots:
+    void reject();
+
     private slots:
         // Forecast option slots
         void onConstantPressureSelected();
@@ -41,6 +54,8 @@ public:
         void onLoadDataClicked();
         void onGenerateClicked();
         void onCancelClicked();
+        void onForecastFinished();
+        void onModelChanged();
 
         // Table edit
         void onPressureCellChanged(int row, int column);
@@ -60,6 +75,7 @@ private:
     void updateUIFromData();
     void updateDataFromUI();
     void saveDataToManager();
+    bool readRateSchedule(QVector<double>& durations, QVector<double>& rates, QString& error) const;
 
     QWidget* buildExtEmptyPage(const QString& text = QString());
     QWidget* buildExtRampPage();
@@ -71,6 +87,13 @@ private:
 private:
 
     nmDataForecast m_forecastData;
+    QPointer<nmDataAnalyzeManager> m_manager; ///< 固定所属分析窗口，不跟随全局当前窗口。
+    nmCalculationDllPebiSolverTask* m_task;
+    QProgressDialog* m_progress;
+    QString m_sourceSnapshotId;
+    QString m_wellName;
+    QVector<double> m_durations; ///< 本次计算的分段时长（hr）。
+    QVector<double> m_rates;     ///< 本次计算的分段产量（m^3/D）。
 
     // Main layout
     QVBoxLayout *m_mainLayout;

Include/nmNum/nmSubWxs/nmWxNumericalDesign.h

@@ -70,6 +70,10 @@ public:
 	void activateCurrentInstance();
 
 signals:
+	// 将预测结果转交给本面板所属的分析主界面。
+	void sigForecastReady(const QString& wellName, const QVector<double>& times,
+	                      const QVector<double>& pressures, const QVector<double>& durations,
+	                      const QVector<double>& rates);
 	void sigGenerateClicked(); // 点击生成按钮时发出的信号
 	// 敏感性批量任务交给所属主窗口，复用普通求解进度框。
 	void sigSensitivityTaskReady(nmWxSensitive* dialog, nmCalculationDllPebiSolverTask* task);

Src/nmNum/nmCalculation/nmCalculationDllPebiSolverTask.cpp

@@ -90,6 +90,7 @@ struct nmPebiSolverInputSnapshot
           m_bGridResultNeedsCommit(false),
           m_bMayUseCachedGrid(false),
           m_bAutoFitTargetOnly(false),
+          m_bRateForecast(false),
           m_bResultMetadataCaptured(false)
     {
     }
@@ -114,6 +115,7 @@ struct nmPebiSolverInputSnapshot
     bool m_bGridResultNeedsCommit;    ///< 完整求解成功后是否需在主线程提交新网格。
     bool m_bMayUseCachedGrid;         ///< 捕获时是否存在同版本网格缓存。
     bool m_bAutoFitTargetOnly;        ///< true 时只构造目标井临时曲线，不提交成果。
+    bool m_bRateForecast;             ///< 产量预测只返回原始压力，不计算双对数和半对数。
     bool m_bResultMetadataCaptured;   ///< 正式结果元数据是否已在主线程完整冻结。
 };
 
@@ -1795,6 +1797,90 @@ bool nmCalculationDllPebiSolverTask::captureInputSnapshot(
     return true;
 }
 
+bool nmCalculationDllPebiSolverTask::configureRateForecast(
+        double initialPressure, const QVector<double>& durations,
+        const QVector<double>& rates)
+{
+    // 使用已有模型的任务副本，从零时刻重新施加制度，绝不改写正式模型及历史数据。
+    if(isRunning() || !m_bInputSnapshotValid || m_pInputSnapshot == NULL ||
+       !m_pInputSnapshot->m_bAutoFitTargetOnly) {
+        return fail(tr("Forecast input is unavailable."));
+    }
+    m_bInputSnapshotValid = false;
+    if(m_pDataManager == NULL || !m_pDataManager->isPebiResultSnapshotCurrent() ||
+       hasInputChanged(m_pDataManager)) {
+        return fail(tr("Generate the current model before forecasting."));
+    }
+    nmPebiGridInputSnapshot& grid = m_pInputSnapshot->m_oGridInput;
+    nmDataBinaryTools::NM_PEBI_SCENE& scene = grid.m_oScene;
+    const int model = scene.solverType;
+    if(model < SMT_Oil_ConstPvt || model > SMT_Gas_PseudoPressure) {
+        return fail(tr("Rate forecast currently supports single-phase models only."));
+    }
+    int target = -1;
+    int wellCount = 0;
+    for(int i = 0; i < grid.m_vecWellInputs.size(); ++i) {
+        const nmPebiWellInputSnapshot& well = grid.m_vecWellInputs[i];
+        if(!well.m_bRealWell) continue;
+        ++wellCount;
+        if(well.m_sWellCode == m_sAutoFitTargetWellCode && well.m_bRateControlled) target = i;
+    }
+    if(wellCount != 1 || target < 0) {
+        return fail(tr("Rate forecast currently requires one rate-controlled well."));
+    }
+    if(!isFiniteSolverNumber(initialPressure) || initialPressure <= 0.0 ||
+       durations.isEmpty() || durations.size() != rates.size()) {
+        return fail(tr("Enter a positive initial pressure and a complete rate schedule."));
+    }
+    double totalTime = 0.0;
+    double cumulative = 0.0;
+    for(int i = 0; i < durations.size(); ++i) {
+        const double nextTime = totalTime + durations[i];
+        cumulative += rates[i] * durations[i] / 24.0;
+        if(!isFiniteSolverNumber(durations[i]) || durations[i] <= 0.0 ||
+           !isFiniteSolverNumber(rates[i]) || rates[i] < 0.0 ||
+           !isFiniteSolverNumber(nextTime) || nextTime <= totalTime ||
+           !isFiniteSolverNumber(cumulative)) {
+            return fail(tr("Each duration must be positive and each production rate non-negative."));
+        }
+        totalTime = nextTime;
+    }
+
+    // 当前 DLL 除油单相常量 PVT 外，单段制度会抛出 vector<T> too long。
+    // 拆为两个同产量的等长段，仅满足 DLL 输入要求，不改变用户的生产制度。
+    QVector<double> solverDurations = durations;
+    QVector<double> solverRates = rates;
+    if(durations.size() == 1 && model != SMT_Oil_ConstPvt) {
+        solverDurations[0] = durations[0] / 2.0;
+        solverDurations.append(durations[0] - solverDurations[0]);
+        solverRates.append(rates[0]);
+    }
+    // 外层数组保持网格槽位顺序；手工裂缝不施加流量，单相流量只填入对应相。
+    const int slotCount = grid.m_vecWellInputs.size();
+    scene.Rate.t.assign(slotCount, std::vector<double>());
+    scene.Rate.qo.assign(slotCount, std::vector<double>());
+    scene.Rate.qg.assign(slotCount, std::vector<double>());
+    scene.Rate.qw.assign(slotCount, std::vector<double>());
+    scene.Rate.t[target].assign(solverDurations.constBegin(), solverDurations.constEnd());
+    scene.Rate.qo[target].assign(solverRates.size(), 0.0);
+    scene.Rate.qg[target].assign(solverRates.size(), 0.0);
+    scene.Rate.qw[target].assign(solverRates.size(), 0.0);
+    std::vector<double>& phaseRates = model <= SMT_Oil_VariablePvt ? scene.Rate.qo[target]
+            : model <= SMT_Water_VariablePvt ? scene.Rate.qw[target] : scene.Rate.qg[target];
+    phaseRates.assign(solverRates.constBegin(), solverRates.constEnd());
+    scene.Base.Pi = initialPressure;
+    m_pInputSnapshot->m_bRateForecast = true;
+    m_bInputSnapshotValid = true;
+    return true;
+}
+
+QVector<QVector<double> > nmCalculationDllPebiSolverTask::getRateForecastPressure() const
+{
+    // 沿用目标井临时结果容器，预测结果不进入正式成果提交路径。
+    return m_pInputSnapshot != NULL && m_pInputSnapshot->m_bRateForecast
+            ? m_autoFitResultPressure : QVector<QVector<double> >();
+}
+
 bool nmCalculationDllPebiSolverTask::prepareManualInput()
 {
     if(m_pInputSnapshot == nullptr) {
@@ -1911,7 +1997,8 @@ bool nmCalculationDllPebiSolverTask::execPebiMode()
     }
 
     const QAtomicInt* pCancelRequested =
-            m_pInputSnapshot->m_bAutoFitTargetOnly && m_pSensitivitySampling.isNull()
+            m_pInputSnapshot->m_bAutoFitTargetOnly && !m_pInputSnapshot->m_bRateForecast &&
+            m_pSensitivitySampling.isNull()
             ? NULL : &m_nCancelRequested;
 
     // 第一步：清空本次任务自己的输出。旧成果仍保留在 DataManager 中，只有主线程
@@ -2166,6 +2253,43 @@ bool nmCalculationDllPebiSolverTask::buildPebiModeResult(
     QVector<QVector<double>> vvecPressure;
     QVector<QVector<double>> vvecLogLog;
     QVector<QVector<double>> vvecSemiLog;
+    if(m_pInputSnapshot->m_bRateForecast) {
+        // 预测允许单段产量和全程关井，不依赖历史流动段或试井诊断曲线。
+        const nmPebiGridInputSnapshot& grid = m_pInputSnapshot->m_oGridInput;
+        int target = -1;
+        for(int i = 0; i < grid.m_vecWellInputs.size(); ++i) {
+            if(grid.m_vecWellInputs[i].m_bRealWell &&
+               grid.m_vecWellInputs[i].m_sWellCode == m_sAutoFitTargetWellCode) target = i;
+        }
+        if(target < 0 || target >= static_cast<int>(p1.pw.size()) || p1.t.empty() ||
+           p1.pw[target].size() != p1.t.size()) {
+            return fail(tr("The solver returned incomplete forecast pressure data."));
+        }
+        double endTime = 0.0;
+        for(size_t i = 0; i < grid.m_oScene.Rate.t[target].size(); ++i)
+            endTime += grid.m_oScene.Rate.t[target][i];
+        const double tolerance = qMax(1.0, endTime) * 1.0e-8;
+        QVector<QVector<double> > pressure(2);
+        if(p1.t[0] > 0.0) {
+            pressure[0].append(0.0);
+            pressure[1].append(grid.m_oScene.Base.Pi);
+        }
+        for(size_t i = 0; i < p1.t.size(); ++i) {
+            if(isCancelRequested()) return false;
+            if(!isFiniteSolverNumber(p1.t[i]) || p1.t[i] < 0.0 ||
+               p1.t[i] > endTime + tolerance || (i > 0 && p1.t[i] <= p1.t[i - 1]) ||
+               !isFiniteSolverNumber(p1.pw[target][i]) || p1.pw[target][i] <= 0.0) {
+                return fail(tr("Invalid forecast pressure or time. Check the rate schedule and model."));
+            }
+            pressure[0].append(p1.t[i]);
+            pressure[1].append(p1.pw[target][i]);
+        }
+        if(qAbs(p1.t.back() - endTime) > tolerance) {
+            return fail(tr("The solver did not reach the end of the forecast schedule."));
+        }
+        m_autoFitResultPressure = pressure;
+        return true;
+    }
     // p1.pw 是求解器返回的原始井底压力, 后续仍按 MPa 保存到 vvecPressure.
     // 只有气单相变化 PVT 模型的双对数和半对数计算需要改用拟压力.
     const bool usePseudoPressure = (modelType == static_cast<int>(SMT_Gas_VariablePvt));

Src/nmNum/nmSubWnd/nmSubWndMain.cpp

@@ -1901,6 +1901,166 @@ void nmSubWndMain::onSensitivityTaskDestroyed()
     m_pProgressDlg->hide();
 }
 
+void nmSubWndMain::onShowForecastResult(const QString& wellName, const QVector<double>& times,
+                                      const QVector<double>& pressures, const QVector<double>& durations,
+                                      const QVector<double>& rates)
+{
+    // 使用面板绑定的分析页面，切换活动分析不会改变预测结果的归属。
+    iSubWndFitting* fitting = m_pResultRefreshFitting.data();
+    nmDataAnalyzeManager* manager = m_pResultRefreshDataManager.data();
+    if(!fitting || !fitting->m_pMdiArea || !manager ||
+       nmDataAnalyzeManager::findManagerByFitting(fitting) != manager ||
+       !manager->isPebiResultSnapshotCurrent()) return;
+    ZxMdiArea* area = fitting->m_pMdiArea;
+    QMdiSubWindow* window = area->findChild<QMdiSubWindow*>("nmForecastResult");
+    const bool created = window == nullptr;
+    if(created) {
+        // 结果页面由 MDI 承载，关闭预测输入对话框不销毁结果。
+        QWidget* page = new QWidget;
+        QVBoxLayout* layout = new QVBoxLayout(page);
+        layout->setContentsMargins(0, 0, 0, 0);
+        QSplitter* charts = new QSplitter(Qt::Vertical, page);
+        charts->setObjectName("nmForecastCharts");
+        charts->setChildrenCollapsible(false);
+        layout->addWidget(charts);
+        // 布局完成后统一适配画布，避免小窗口下两个绘图区缩放比例不同。
+        charts->installEventFilter(this);
+        connect(charts, SIGNAL(splitterMoved(int,int)), this, SLOT(fitForecastViews()), Qt::QueuedConnection);
+        for(int i = 0; i < 2; ++i) {
+            iGuiPlot* plot = new iGuiPlot(true, charts);
+            plot->setObjectName(i == 0 ? "nmForecastRate" : "nmForecastPressure");
+            plot->initUI(i == 0 ? tr("Production rate") : tr("Bottomhole pressure"));
+            plot->m_pPlotView->setSimpleMode(true);
+            plot->setDropEnabled(false);
+            plot->setAxisX(tr("Time"), "hr");
+            plot->setAxisY(i == 0 ? tr("Production rate") : tr("Bottomhole pressure"), i == 0 ? "m^3/D" : "MPa");
+            plot->setAxisY(i == 0 ? tr("Cumulative production") : QString(), i == 0 ? "m^3" : "", true);
+            for(int axis = 0; axis < 3; ++axis) plot->setAxisXYLog(false, axis);
+            plot->getAxisOf(2)->setVisible(true);
+            // 下图右侧保留空轴位，确保两张图的时间刻度在水平方向对齐。
+            if(i == 1) {
+                plot->getAxisOf(2)->setColor(Qt::transparent);
+            }
+            plot->m_pPlot->setBKColor(Qt::white);
+            plot->m_pPlot->setLegendVisible(false);
+            charts->addWidget(plot);
+            charts->setStretchFactor(i, 1);
+            connect(plot->getAxisOf(0), SIGNAL(sigRangeChanged(double,double,bool,bool)),
+                    this, SLOT(syncForecastTimeAxis(double,double,bool,bool)));
+        }
+        window = area->addSubWindow(page);
+        window->setObjectName("nmForecastResult");
+        window->setAttribute(Qt::WA_DeleteOnClose, false);
+    }
+    window->setWindowTitle(tr("Forecast - %1").arg(wellName));
+
+    // 压力直接取求解器结果；阶梯产量及累计量按本次输入制度精确构造。
+    QVector<double> rateTimes, rateValues, cumulativeTimes, cumulativeValues;
+    double time = 0.0, cumulative = 0.0;
+    cumulativeTimes.append(0.0);
+    cumulativeValues.append(0.0);
+    for(int i = 0; i < durations.size(); ++i) {
+        rateTimes << time << time + durations[i];
+        rateValues << rates[i] << rates[i];
+        time += durations[i];
+        cumulative += rates[i] * durations[i] / 24.0;
+        cumulativeTimes.append(time);
+        cumulativeValues.append(cumulative);
+    }
+    const QStringList names = QStringList() << tr("Bottomhole pressure") << tr("Production rate") << tr("Cumulative production");
+    QVector<iCurveDesc> curves;
+    for(int i = 0; i < 3; ++i) {
+        iCurveDesc curve;
+        curve.m_sCurveName = names[i];
+        curve.m_oCurveType = POT_CurveDiscrete;
+        curve.m_bLineVisible = true;
+        curve.m_bPointVisible = false;
+        curve.m_bUseY2 = i == 2;
+        curve.m_oPen = QPen(i == 0 ? Qt::red : i == 1 ? Qt::darkGreen : Qt::gray, 0.35);
+        curve.m_vecX = i == 0 ? times : i == 1 ? rateTimes : cumulativeTimes;
+        curve.m_vecY = i == 0 ? pressures : i == 1 ? rateValues : cumulativeValues;
+        curves.append(curve);
+    }
+    iGuiPlot* plots[] = {window->findChild<iGuiPlot*>("nmForecastRate"),
+                        window->findChild<iGuiPlot*>("nmForecastPressure")};
+    for(int i = 0; i < 2; ++i) {
+        iGuiPlot* plot = plots[i];
+        // 重复生成只替换曲线，清理旧图元和撤销记录，保留上下图窗口。
+        for(int j = plot->m_pPlot->getObjCount() - 1; j >= 0; --j)
+            if(qobject_cast<ZxObjCurve*>(plot->m_pPlot->getObjByIndex(j))) plot->m_pPlot->removeObjByIndex(j);
+        plot->clearUndoStack();
+        plot->setCurveData(i == 0 ? curves.mid(1, 2) : curves.mid(0, 1));
+        plot->runUpdate();
+        plot->setReadOnly(true);
+        plot->freshAxisScales(true, true);
+        // 自动定标会压缩没有曲线的右轴，下图需要保留这块空白以对齐上图。
+        plot->getAxisOf(2)->setMinimizeAxis(false);
+        // 两张图都以完整预测时长为基准，缩放复原时也回到同一时间范围。
+        VecDouble ticks;
+        for(int tick = 0; tick <= 5; ++tick) ticks.append(time * tick / 5.0);
+        plot->setAxisScaleX(0.0, time, ticks);
+        // 时间刻度及标题只在下图显示，上图仍保留横轴数据与同步关系。
+        plot->getAxisOf(0)->setMinimizeAxis(i == 0);
+    }
+    const bool restore = window->isHidden();
+    window->widget()->show();
+    window->show();
+    // 隐藏的分析页交给框架显示事件布局，避免此时重排把结果重新隐藏。
+    if((created || restore) && area->isVisible()) area->relayoutSubWnds();
+    area->setActiveSubWindow(window);
+    QTimer::singleShot(0, this, SLOT(fitForecastViews()));
+}
+
+bool nmSubWndMain::eventFilter(QObject* watched, QEvent* event)
+{
+    // 子窗口缩放、重新显示均在内部控件完成尺寸更新后再适配。
+    if(watched->objectName() == "nmForecastCharts" &&
+       (event->type() == QEvent::Resize || event->type() == QEvent::Show))
+        QTimer::singleShot(0, this, SLOT(fitForecastViews()));
+    return iSubWndBaseFit::eventFilter(watched, event);
+}
+
+void nmSubWndMain::fitForecastViews()
+{
+    // 只适配图形画布的显示尺寸，不改变用户选定的时间和压力范围。
+    iSubWndFitting* fitting = m_pResultRefreshFitting.data();
+    if(!fitting || !fitting->m_pMdiArea) return;
+    QMdiSubWindow* window = fitting->m_pMdiArea->findChild<QMdiSubWindow*>("nmForecastResult");
+    if(!window) return;
+    foreach(iGuiPlot* plot, window->findChildren<iGuiPlot*>())
+        plot->m_pPlotView->setZoomMode(ZxRenderView::eZoomFitWindow, true);
+}
+
+void nmSubWndMain::syncForecastTimeAxis(double minimum, double maximum, bool recalcTicks, bool adjustZoom)
+{
+    // 只同步本分析预测图的横轴；阻断回传，避免两张图相互触发范围更新。
+    iSubWndFitting* fitting = m_pResultRefreshFitting.data();
+    if(!fitting || !fitting->m_pMdiArea) return;
+    QMdiSubWindow* window = fitting->m_pMdiArea->findChild<QMdiSubWindow*>("nmForecastResult");
+    if(!window) return;
+    iGuiPlot* rate = window->findChild<iGuiPlot*>("nmForecastRate");
+    iGuiPlot* pressure = window->findChild<iGuiPlot*>("nmForecastPressure");
+    if(!rate || !pressure) return;
+    iGuiPlot* target = sender() == rate->getAxisOf(0) ? pressure : rate;
+    ZxSubAxisBase* axis = target->getAxisOf(0);
+    const bool blocked = axis->blockSignals(true);
+    axis->setRangeMinMax(minimum, maximum, recalcTicks, adjustZoom);
+    axis->blockSignals(blocked);
+    target->m_pPlot->update();
+}
+
+void nmSubWndMain::clearForecastResult()
+{
+    // 由数据管理器通知主界面清场，不依赖预测输入对话框是否仍然打开。
+    iSubWndFitting* fitting = m_pResultRefreshFitting.data();
+    if(sender() != m_pResultRefreshDataManager.data() || !fitting || !fitting->m_pMdiArea) return;
+    QMdiSubWindow* window = fitting->m_pMdiArea->findChild<QMdiSubWindow*>("nmForecastResult");
+    if(window) {
+        fitting->m_pMdiArea->removeSubWindow(window);
+        delete window;
+    }
+}
+
 void nmSubWndMain::onShowSensitiveResults()
 {
     // 使用固定所属分析的窗口与数据，不能把结果画到当前活动的其他分析中。

Src/nmNum/nmSubWnd/nmSubWndUtils.cpp

@@ -481,6 +481,8 @@ void nmSubWndUtils::setupNumericalDockWidgets(nmDataAnalyzeManager* pDataManager
     // 数值设计面板只发出操作请求，具体处理仍由主窗口完成。
     connect(pAnalWx, SIGNAL(sigGenerateClicked()),
             pSubWndMain, SLOT(onGenerateButtonClicked()));
+    connect(pAnalWx, SIGNAL(sigForecastReady(QString,QVector<double>,QVector<double>,QVector<double>,QVector<double>)),
+            pSubWndMain, SLOT(onShowForecastResult(QString,QVector<double>,QVector<double>,QVector<double>,QVector<double>)));
     connect(pAnalWx, SIGNAL(sigSensitivityTaskReady(nmWxSensitive*,nmCalculationDllPebiSolverTask*)),
             pSubWndMain, SLOT(onSensitivityTaskReady(nmWxSensitive*,nmCalculationDllPebiSolverTask*)));
     connect(pAnalWx, SIGNAL(sigResultWellChanged(QString)),
@@ -488,6 +490,11 @@ void nmSubWndUtils::setupNumericalDockWidgets(nmDataAnalyzeManager* pDataManager
 
     // 手工求解和自动拟合都发布同一种正式快照，统一复用主窗口结果刷新逻辑。
     pSubWndMain->bindPebiResultRefreshContext(pDataManager, pSubWndFitting);
+    // 输入窗口关闭后，主界面仍负责清理因模型变化而失效的预测。
+    connect(pDataManager, SIGNAL(sigPebiResultSnapshotChanged()),
+            pSubWndMain, SLOT(clearForecastResult()), Qt::UniqueConnection);
+    connect(pDataManager, SIGNAL(sigPebiResultStateChanged()),
+            pSubWndMain, SLOT(clearForecastResult()), Qt::UniqueConnection);
     connect(pDataManager, SIGNAL(sigSensitiveResultsChanged()),
             pSubWndMain, SLOT(onShowSensitiveResults()),
             static_cast<Qt::ConnectionType>(Qt::QueuedConnection | Qt::UniqueConnection));

Src/nmNum/nmSubWxs/nmWxForecast.cpp

@@ -4,9 +4,17 @@
 #include <QSpacerItem>
 #include <QSizePolicy>
 #include <QLabel>
+#include <QMessageBox>
+#include <QProgressDialog>
+#include <QtCore/qnumeric.h>
+#include "nmCalculationDllPebiSolverTask.h"
+#include "nmPebiResultSnapshot.h"
 
-nmWxForecast::nmWxForecast(QWidget *parent)
+nmWxForecast::nmWxForecast(QWidget *parent, nmDataAnalyzeManager* manager)
 	: iDlgBase(parent)
+	, m_manager(manager ? manager : nmDataAnalyzeManager::getCurrentInstance())
+	, m_task(NULL)
+	, m_progress(NULL)
 	, m_initialPressureComponent(nullptr)
 	, m_abandonmentRateComponent(nullptr)
 	, m_maximumRateComponent(nullptr)
@@ -26,6 +34,7 @@ nmWxForecast::nmWxForecast(QWidget *parent)
 {
 	setWindowTitle("Forecast");
 	setFixedSize(520, 560);
+	setAttribute(Qt::WA_DeleteOnClose);
 
 	PressureRow tempDefaults;
 	m_currentDurationUnit = tempDefaults.duration.getUnit();
@@ -43,44 +52,41 @@ nmWxForecast::nmWxForecast(QWidget *parent)
 
 	// 根据加载的数据更新界面
 	updateParametersForOption();
+	if(m_manager) {
+		connect(m_manager, SIGNAL(sigPebiResultSnapshotChanged()), this, SLOT(onModelChanged()));
+		connect(m_manager, SIGNAL(sigPebiResultStateChanged()), this, SLOT(onModelChanged()));
+		connect(m_manager, SIGNAL(destroyed()), this, SLOT(close()));
+	}
 }
 
 nmWxForecast::~nmWxForecast()
 {
+	// DLL 内部不能强行中断，析构前等待任务退出，避免悬空回调。
+	if(m_task) {
+		m_task->requestCancel();
+		m_task->wait();
+		delete m_task;
+	}
 }
 
 void nmWxForecast::loadDataFromManager()
 {
-	// 从数据中心获取预测数据的副本
-	nmDataAnalyzeManager* pManager = nmDataAnalyzeManager::getCurrentInstance();
-
-	if(pManager) {
-		m_forecastData = pManager->getForecastDataCopy();
-
-		// 根据数据设置单选按钮
-		nmDataForecast::ForecastOption option = m_forecastData.getForecastOption();
-
-		switch(option) {
-		case nmDataForecast::ConstantPressureOption:
-			m_constantPressureRadio->setChecked(true);
-			break;
-
-		case nmDataForecast::DecliningPressureOption:
-			m_decliningPressureRadio->setChecked(true);
-			break;
-
-		case nmDataForecast::MultiplePressuresOption:
-			m_multiplePressuresRadio->setChecked(true);
-			break;
-		case nmDataForecast::MultipleRatesOption:
-			m_multipleRatesRadio->setChecked(true);
-			break;
+	// 当前先开放分段产量，初始压力默认取已生成模型，输入只保留在内存中。
+	if(m_manager) m_forecastData = m_manager->getForecastDataCopy();
+	nmDataAttribute& pressure = m_forecastData.getMultipleRatesData().getInitialPressure();
+	if(m_manager && m_forecastData.getForecastOption() != nmDataForecast::MultipleRatesOption) {
+		const QSharedPointer<const nmPebiResultSnapshot> solved = m_manager->getPebiResultSnapshot();
+		if(!solved.isNull()) {
+			pressure.setValue(pressure.convertValueByUnitType(
+				solved->getReservoirParameters().m_dInitialPressure, "MPa", pressure.getUnit()));
 		}
-	} else {
-		// 如果数据中心不存在，使用默认数据
-		m_constantPressureRadio->setChecked(true);
-		m_forecastData.setForecastOption(nmDataForecast::ConstantPressureOption);
 	}
+	// 本页使用绝对压力，避免通用单位控件把表压当作绝压换算。
+	pressure.setListUnitSelections(QStringList() << "MPa" << "psia" << "kPa" << "bara");
+	m_forecastData.setForecastOption(nmDataForecast::MultipleRatesOption);
+	m_multipleRatesRadio->blockSignals(true);
+	m_multipleRatesRadio->setChecked(true);
+	m_multipleRatesRadio->blockSignals(false);
 }
 
 void nmWxForecast::saveDataToManager()
@@ -89,7 +95,7 @@ void nmWxForecast::saveDataToManager()
 	updateDataFromUI();
 
 	// 保存到数据中心
-	nmDataAnalyzeManager* pManager = nmDataAnalyzeManager::getCurrentInstance();
+	nmDataAnalyzeManager* pManager = m_manager.data();
 
 	if(pManager) {
 		pManager->updateForecastData(m_forecastData);
@@ -108,6 +114,10 @@ void nmWxForecast::setupUI()
 	m_decliningPressureRadio  = new QRadioButton("Declining pressure (ramp)", this);
 	m_multiplePressuresRadio  = new QRadioButton("Multiple pressures", this);
 	m_multipleRatesRadio      = new QRadioButton("Multiple rates", this);
+	// 求解器目前仅接通产量控制；压力控制保留入口但不允许生成。
+	m_constantPressureRadio->setEnabled(false);
+	m_decliningPressureRadio->setEnabled(false);
+	m_multiplePressuresRadio->setEnabled(false);
 
 	m_forecastButtonGroup = new QButtonGroup(this);
 	m_forecastButtonGroup->addButton(m_constantPressureRadio, 0);
@@ -390,7 +400,7 @@ QWidget* nmWxForecast::buildExtMultiRatePage()
 	// 创建表格
 	m_rateTableWidget = new QTableWidget(0, 2);
 	// 根据截图设置表头
-	m_rateTableWidget->setHorizontalHeaderLabels(QStringList() << "Duration" << "Qo"); 
+	m_rateTableWidget->setHorizontalHeaderLabels(QStringList() << "Duration" << "Rate");
 	m_rateTableWidget->verticalHeader()->setVisible(false);
 	m_rateTableWidget->horizontalHeader()->setResizeMode(QHeaderView::Stretch);
 
@@ -799,7 +809,7 @@ void nmWxForecast::updateUIFromData()
 				QString basePresUnit = rowData.pressure.getUnit();
 				double displayPresValue = tempDefaults.pressure.convertValueByUnitType(basePresValue, basePresUnit, m_currentPressureUnit);
 
-				QTableWidgetItem* durationItem = new QTableWidgetItem(QString::number(displayDurValue));
+				QTableWidgetItem* durationItem = new QTableWidgetItem(QString::number(displayDurValue, 'g', 15));
 				durationItem->setTextAlignment(Qt::AlignCenter);
 				m_pressureTableWidget->setItem(tableRow, 0, durationItem);
 
@@ -855,11 +865,11 @@ void nmWxForecast::updateUIFromData()
 				QString baseRateUnit = rowData.q0.getUnit();
 				double displayRateValue = tempDefaults.q0.convertValueByUnitType(baseRateValue, baseRateUnit, m_currentRateUnit);
 
-				QTableWidgetItem* durationItem = new QTableWidgetItem(QString::number(displayDurValue));
+				QTableWidgetItem* durationItem = new QTableWidgetItem(QString::number(displayDurValue, 'g', 15));
 				durationItem->setTextAlignment(Qt::AlignCenter);
 				m_rateTableWidget->setItem(tableRow, 0, durationItem);
 
-				QTableWidgetItem* rateItem = new QTableWidgetItem(QString::number(displayRateValue));
+				QTableWidgetItem* rateItem = new QTableWidgetItem(QString::number(displayRateValue, 'g', 15));
 				rateItem->setTextAlignment(Qt::AlignCenter);
 				m_rateTableWidget->setItem(tableRow, 1, rateItem);
 			}
@@ -992,22 +1002,138 @@ void nmWxForecast::onLoadDataClicked()
 
 void nmWxForecast::onGenerateClicked()
 {
-	// 确保最新的界面数据写回到模型
-	updateDataFromUI();
-
-	// 保存数据到数据中心
+	// 先校验原始输入，避免空单元格被旧的数据同步逻辑补成默认值。
+	if(m_task) return;
+	if(!m_manager || !m_manager->isPebiResultSnapshotCurrent()) {
+		QMessageBox::warning(this, tr("Forecast"), tr("Generate the current model before forecasting."));
+		return;
+	}
+	const QSharedPointer<const nmPebiResultSnapshot> solved = m_manager->getPebiResultSnapshot();
+	if(solved->getWellCount() != 1 || solved->getSolverSettings().m_nSolverModelType < 1 ||
+	   solved->getSolverSettings().m_nSolverModelType > 6) {
+		QMessageBox::warning(this, tr("Forecast"), tr("Rate forecast currently supports single-well, single-phase models only."));
+		return;
+	}
+	QString error;
+	QVector<double> durations, rates;
+	if(!readRateSchedule(durations, rates, error)) {
+		QMessageBox::warning(this, tr("Forecast"), error);
+		return;
+	}
+	nmDataAttribute& pressure = m_forecastData.getMultipleRatesData().getInitialPressure();
+	if(!m_initialPressureComponent->updateValueToOrigin()) {
+		QMessageBox::warning(this, tr("Forecast"), tr("Enter a positive initial pressure."));
+		return;
+	}
+	const double pi = pressure.convertValueByUnitType(pressure.getValue().toDouble(), pressure.getUnit(), "MPa");
+	m_wellName = solved->getWellAt(0)->m_sWellName;
+	m_task = new nmCalculationDllPebiSolverTask(QString(), m_manager, m_wellName, this);
+	if(!m_task->configureRateForecast(pi, durations, rates)) {
+		error = m_task->getFailureReason();
+		delete m_task;
+		m_task = NULL;
+		QMessageBox::warning(this, tr("Forecast"), error);
+		return;
+	}
 	saveDataToManager();
-
-	// TODO: 使用数据中心的数据进行预测计算
-
-	accept();
+	m_durations = durations;
+	m_rates = rates;
+	m_sourceSnapshotId = solved->getSnapshotId();
+	m_parametersGroup->setEnabled(false);
+	m_generateButton->setEnabled(false);
+	m_progress = new QProgressDialog(tr("Calculating forecast..."), tr("Cancel"), 0, 0, this);
+	m_progress->setWindowTitle(tr("Forecast"));
+	m_progress->setWindowModality(Qt::ApplicationModal);
+	m_progress->setMinimumDuration(0);
+	m_progress->setAutoClose(false);
+	connect(m_progress, SIGNAL(canceled()), this, SLOT(onCancelClicked()));
+	connect(m_task, SIGNAL(finished()), this, SLOT(onForecastFinished()));
+	m_progress->show();
+	m_task->start();
 }
 
 void nmWxForecast::onCancelClicked()
 {
+	// 关闭按钮和进度框共用协作式停止，不在 DLL 内部强制终止线程。
 	reject();
 }
 
+void nmWxForecast::reject()
+{
+	// 正在求解时保留窗口，等线程结束后恢复输入，避免关闭操作阻塞界面。
+	if(m_task) {
+		m_task->requestCancel();
+		m_progress->setLabelText(tr("Stopping after the current solver call finishes..."));
+		m_progress->setCancelButton(NULL);
+		m_progress->show();
+		return;
+	}
+	iDlgBase::reject();
+}
+
+bool nmWxForecast::readRateSchedule(QVector<double>& durations, QVector<double>& rates, QString& error) const
+{
+	// 求解器统一使用小时及标准体积产量，完整空行跳过，半空行必须补全。
+	durations.clear();
+	rates.clear();
+	FlowRow units;
+	for(int row = 1; row < m_rateTableWidget->rowCount(); ++row) {
+		const QTableWidgetItem* durationItem = m_rateTableWidget->item(row, 0);
+		const QTableWidgetItem* rateItem = m_rateTableWidget->item(row, 1);
+		const QString durationText = durationItem ? durationItem->text().trimmed() : QString();
+		const QString rateText = rateItem ? rateItem->text().trimmed() : QString();
+		if(durationText.isEmpty() && rateText.isEmpty()) continue;
+		bool durationOk = false, rateOk = false;
+		double duration = durationText.toDouble(&durationOk);
+		double rate = rateText.toDouble(&rateOk);
+		duration = units.duration.convertValueByUnitType(duration, m_currentDurationUnit, "hr");
+		rate = units.q0.convertValueByUnitType(rate, m_currentRateUnit, "m^3/D");
+		if(!durationOk || !rateOk || !qIsFinite(duration) || duration <= 0.0 ||
+		   !qIsFinite(rate) || rate < 0.0) {
+			error = tr("Row %1: enter a positive duration and a non-negative production rate (0 for shut-in).").arg(row);
+			return false;
+		}
+		durations.append(duration);
+		rates.append(rate);
+	}
+	if(durations.isEmpty()) {
+		error = tr("Enter at least one duration and production rate.");
+		return false;
+	}
+	return true;
+}
+
+void nmWxForecast::onForecastFinished()
+{
+	// finished 后才读取及销毁任务；输入变化或模型重新生成时丢弃本次预测。
+	m_task->wait();
+	const bool cancelled = m_task->wasCancelled() || m_progress->wasCanceled();
+	const bool current = m_manager && m_manager->isPebiResultSnapshotCurrent() &&
+		!m_task->hasInputChanged(m_manager) &&
+		m_manager->getPebiResultSnapshot()->getSnapshotId() == m_sourceSnapshotId;
+	const bool success = m_task->wasSuccessful();
+	const QString error = m_task->getFailureReason();
+	const QVector<QVector<double> > pressure = m_task->getRateForecastPressure();
+	delete m_task;
+	m_task = NULL;
+	delete m_progress;
+	m_progress = NULL;
+	m_parametersGroup->setEnabled(true);
+	m_generateButton->setEnabled(true);
+	if(cancelled) return;
+	if(!current || !success) {
+		QMessageBox::warning(this, tr("Forecast"), current ? error : tr("The model changed. Generate the forecast again."));
+		return;
+	}
+	emit sigForecastReady(m_wellName, pressure[0], pressure[1], m_durations, m_rates);
+}
+
+void nmWxForecast::onModelChanged()
+{
+	// 模型或输入改变时停止本次计算；已显示的结果由所属主界面清理。
+	if(m_task) m_task->requestCancel();
+}
+
 void nmWxForecast::onPressureCellChanged(int row, int column)
 {
 	Q_UNUSED(column);
@@ -1131,10 +1257,12 @@ void nmWxForecast::onSharedDurationUnitChanged(const QString& unit)
 			QTableWidgetItem* dataItem = m_rateTableWidget->item(i, 0); // 第0列 (Duration)
 
 			if(dataItem && !dataItem->text().isEmpty()) {
-				double oldDisplayValue = dataItem->text().toDouble();
+				bool ok = false;
+				double oldDisplayValue = dataItem->text().toDouble(&ok);
+				if(!ok || !qIsFinite(oldDisplayValue)) continue;
 				// 转换值
 				double newDisplayValue = tempDefaults.duration.convertValueByUnitType(oldDisplayValue, oldUnit, unit);
-				dataItem->setText(QString::number(newDisplayValue));
+				dataItem->setText(QString::number(newDisplayValue, 'g', 15));
 			}
 		}
 		m_rateTableWidget->blockSignals(false);
@@ -1170,10 +1298,12 @@ void nmWxForecast::onRateUnitChanged(const QString& unit)
 		QTableWidgetItem* dataItem = m_rateTableWidget->item(i, 1); // 第1列
 
 		if(dataItem && !dataItem->text().isEmpty()) {
-			double oldDisplayValue = dataItem->text().toDouble();
+			bool ok = false;
+			double oldDisplayValue = dataItem->text().toDouble(&ok);
+			if(!ok || !qIsFinite(oldDisplayValue)) continue;
 			// 使用 q0 (FlowRate) 进行单位转换
 			double newDisplayValue = tempDefaults.q0.convertValueByUnitType(oldDisplayValue, oldUnit, unit);
-			dataItem->setText(QString::number(newDisplayValue));
+			dataItem->setText(QString::number(newDisplayValue, 'g', 15));
 		}
 	}
 

Src/nmNum/nmSubWxs/nmWxNumericalDesign.cpp

@@ -1445,7 +1445,12 @@ void nmWxNumericalDesign::onAutomaticFittingClicked()
 
 void nmWxNumericalDesign::onForecastClicked()
 {
-	nmWxForecast* dlg = new nmWxForecast();
+	// 预测固定绑定当前分析窗口，并要求先生成基础模型。
+	updateSensitiveButtonEnabled();
+	if(!m_pForecastBtn->isEnabled()) return;
+	nmWxForecast* dlg = new nmWxForecast(this, m_pDataManager);
+	connect(dlg, SIGNAL(sigForecastReady(QString,QVector<double>,QVector<double>,QVector<double>,QVector<double>)),
+			this, SIGNAL(sigForecastReady(QString,QVector<double>,QVector<double>,QVector<double>,QVector<double>)));
 	dlg->show();
 }
 
@@ -1457,6 +1462,8 @@ void nmWxNumericalDesign::updateSensitiveButtonEnabled()
     const bool available = !solved.isNull();
     m_pSensitiveBtn->setEnabled(available);
     m_pAutomaticfittingBtn->setEnabled(available);
+    m_pForecastBtn->setEnabled(available);
+    m_pForecastBtn->setToolTip(available ? QString() : tr("Generate the model to enable forecast."));
     m_pSensitiveBtn->setToolTip(available ? QString() : tr("Generate the model to enable sensitivity analysis."));
 }