nmWATI/Src/nmNum/nmSubWnd/nmSubWndMain.cpp

#include "zxLogInstance.h"
#include "ZxBaHelper.h"
#include "ZxResolutionHelper.h"
#include "zxSysUtils.h"
#include "ZxPtyDock.h"
#include "iDockBaseWx.h"
#include "ZxMainWindow.h"

#include "ZxSubAxisX.h"
#include "ZxSubAxisY.h"

#include "ZxPlot.h"
#include "ZxObjCurve.h"
#include "ZxSubTitle.h"
#include "tCurvePlotScene.h"
#include "tCurvePlotView.h"

#include "ZxTableView.h"
#include "ZxTableModel.h"

#include "mModuleDefines.h"

#include "ZxDataWell.h"
#include "ZxDataProject.h"
#include "ZxRstJobWnd.h"
#ifdef QT_DEBUG
    #include "ZxDataGaugeP.h"
#endif

#ifdef QT_DEBUG
    #include "nmXmlHelper.h"
#endif

#include "nmGuiPlot.h"
#include "nmWxParaProperty.h"
#include "nmWxTreeWidget.h"

#include "nmSubWndMain.h"
#include "nmDataDemo.h"

#include "nmDataLogFile.h"

#include "nmWxGridVTKContainerWidget.h"
#include "nmWxSelectWellsDlg.h"
#include "nmWxSelectWellsWidget.h"

#include <QVector>

nmSubWndMain::nmSubWndMain(QWidget *parent, QString sExt) :
    iSubWndBaseAF(parent, sExt)
{
    m_pWxPlot = NULL;
    m_pWxDockParas = NULL;
    m_pWxParas = NULL;
    m_pWxDockData1 = NULL;
    m_pTableView1 = NULL;
    m_pWxDockData2 = NULL;
    m_pTableView2 = NULL;
#ifdef QT_DEBUG
    m_pWxDockTemp = NULL;
    m_pListWxTemp = NULL;
#endif
    // 为了后续支持多井提供方便
    if (m_pDataWell == NULL) {
        m_pDataWell = zxCurWell;
    }
    m_sMdiWndType = s_MdiType_DataNum;
//    m_analyzeData = new nmDataDemo();
    setWindowTitle(tr("nmSubWndMain"));
}

nmSubWndMain::~nmSubWndMain()
{
#ifdef QT_DEBUG
    // 坚持谁创建谁析构原则，删除（首先需要去除绑定）
    if (NULL != m_pWxDockTemp) {
        //QObject* pParent = m_pWxDockTemp->parent();
        //ZxMainWindow* p = dynamic_cast<ZxMainWindow*>(pParent);
        ZxMainWindow* p = m_pMainWindow;
        if (NULL != p) {
            p->detachOuterDockWx(m_pWxDockTemp);
        }
        delete m_pWxDockTemp;
        m_pWxDockTemp = NULL;
    }
#endif
    this->setTopDocksVisible(true);
}

void nmSubWndMain::configWnd()
{
    iSubWndBaseAF::configWnd();
    if (NULL != m_pMainWindow) {
        disconnect(this, SIGNAL(sigAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)), \
                   m_pMainWindow, SLOT(slotAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)));
        connect(this, SIGNAL(sigAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)), \
                m_pMainWindow, SLOT(slotAppendDock2Main(iDockBaseWx*, Qt::DockWidgetArea)));
    }
    initUI();
}

void nmSubWndMain::initUI()
{
    //    iSubWndBaseAF::initUI();
#ifdef QT_DEBUG
    // 示例：演示增加Dock并且追加至程序主窗口
    initUiTop();
#endif
    // 主布局：定义
    initUiMain();
    // 外围布局，DockWx
    {
        initUiDockWxs();
        initUiDockPtys();
    }
#ifdef QT_DEBUG
    // 示例：如何加载xml文件
    if (_nmXmlHelper->loadXmlDefines()) {
        foreach (nmXmlData* pData, *(_nmXmlHelper->getVecNmXmlDataPtrs())) {
            Q_ASSERT (NULL != pData);
            zxLogRunD(QString("%1: %2").arg(pData->m_sName).arg(pData->m_sAlias));
        }
    }
#endif
}

QWidget* nmSubWndMain::initUiMainWx()
{
    QSplitter* pSplitter = new QSplitter(Qt::Vertical);
    Q_ASSERT (NULL != pSplitter);
    nmGuiPlot* pWxPlot = new nmGuiPlot();
    m_pWxPlot = pWxPlot;
    m_pAnalyzeData->setWxPlot(m_pWxPlot);
    {
        // 建立信号，以便在此处增加新的工具
        connect(pWxPlot, SIGNAL(sigToolbarBuilt(QToolBar*)),
                this, SLOT(slotToolbarBuilt(QToolBar*)));
        QSize sz = QSize(265, 203);
        pWxPlot->initUI("TestGui", sz);
        bindChartSignals(pWxPlot);
        pSplitter->addWidget(pWxPlot);
    }
    return pSplitter;
}

void nmSubWndMain::initUiDockWxs()
{
    // TODO，本Dock的操作
    // 基础参数Dock
//    {
//        m_pWxDockParas = new iDockBaseWx(tr("Parameters"));
//        Q_ASSERT (NULL != m_pWxDockParas);
//        addDockWidget(Qt::LeftDockWidgetArea, m_pWxDockParas);
//        m_pWxParas = new nmWxParaProperty();
//        Q_ASSERT (NULL != m_pWxParas);
//        m_pWxParas->initUI();
//        m_pWxDockParas->setWidget(m_pWxParas);
//        m_pWxDockParas->setMinimumWidth(_resoSizeW(200));
//    }
    // 表格数据Dock
//    {
//        QStringList listTitles;
//        listTitles << tr("Name1");
//        iDockBaseWx* pDockWx1 = new iDockBaseWx(tr("Data1"));
//        Q_ASSERT (NULL != pDockWx1);
//        {
//            addDockWidget(Qt::RightDockWidgetArea, pDockWx1);
//            m_pWxDockData1 = pDockWx1;
//            ZxTableView* pTableView = new ZxTableView();
//            Q_ASSERT (NULL != pTableView);
//            {
//                ZxTableModel* pTableModel = new ZxTableModel(1, 1, listTitles);
//                Q_ASSERT (NULL != pTableModel);
//                pTableView->setModel(pTableModel);
//                pTableView->setMenuMode(ZxTableView::MTM_Edit_Without_Col);
//                pTableView->setSelectionBehavior(ZxTableView::SelectRows);
//                pTableView->fuzzyUiOfQt5();
//            }
//            pDockWx1->setWidget(pTableView);
//            m_pTableView1 = pTableView;
//        }
//        iDockBaseWx* pDockWx2 = new iDockBaseWx(tr("Data2"));
//        Q_ASSERT (NULL != pDockWx2);
//        {
//            addDockWidget(Qt::RightDockWidgetArea, pDockWx2);
//            tabifyDockWidget(pDockWx1, pDockWx2);
//            m_pWxDockData2 = pDockWx2;
//            ZxTableView* pTableView = new ZxTableView();
//            Q_ASSERT (NULL != pTableView);
//            {
//                ZxTableModel* pTableModel = new ZxTableModel(1, 1, listTitles);
//                Q_ASSERT (NULL != pTableModel);
//                pTableView->setModel(pTableModel);
//                pTableView->setMenuMode(ZxTableView::MTM_Readonly);
//                pTableView->fuzzyUiOfQt5();
//            }
//            pDockWx2->setWidget(pTableView);
//            m_pTableView2 = pTableView;
//        }
//    }
}

void nmSubWndMain::initUiDockPtys()
{
    iSubWndBaseAF::initUiDockPtys();
    // 属性Dock
    {
        Q_ASSERT (NULL != m_pDockPty);
        m_pDockPty->setMinimumWidth(_resoSizeW(200));
    }
}

#ifdef QT_DEBUG
// 示例：演示增加Dock并且追加至程序主窗口
void nmSubWndMain::initUiTop()
{
    // 隐藏所有Dock
    this->setTopDocksVisible(false);
    // 创建新的Dock
    iDockBaseWx* pDockWx = new iDockBaseWx(tr("TODO:Demo"));
    Q_ASSERT (NULL != pDockWx);
//    QListWidget* pListWx = new QListWidget();
    nmWxTreeWidget* treeWidget = new nmWxTreeWidget(pDockWx, m_pAnalyzeData);
    Q_ASSERT (NULL != treeWidget);
    pDockWx->setWidget(treeWidget);
//    m_pListWxTemp = pListWx;
    pDockWx->setMinimumWidth(_resoSizeW(200));
    emit sigAppendDock2Main(pDockWx, Qt::LeftDockWidgetArea);
    m_pWxDockTemp = pDockWx;
    return;
    // 基础参数Dock
//    {
//        iDockBaseWx* pDockWx = new iDockBaseWx(tr("TODO:Demo"));
//        Q_ASSERT (NULL != pDockWx);
//        QListWidget* pListWx = new QListWidget();
//        Q_ASSERT (NULL != pListWx);
//        pDockWx->setWidget(pListWx);
//        m_pListWxTemp = pListWx;
//        pDockWx->setMinimumWidth(_resoSizeW(200));
//        emit sigAppendDock2Main(pDockWx, Qt::LeftDockWidgetArea);
//        m_pWxDockTemp = pDockWx;
//    }
}

#endif

void nmSubWndMain::bindChartSignals(iGuiPlot* pWxPlot)
{
    nmGuiPlot* p = dynamic_cast<nmGuiPlot*>(pWxPlot);
    if (NULL != p) {
        connect(p, SIGNAL(sigObjSelChanged(ZxObjBase*, bool)), \
                this, SLOT(slotObjSelChanged(ZxObjBase*, bool)));
        connect(p, SIGNAL(sigObjPtsChanged(ZxObjBase*)),
                this, SLOT(slotObjPtsChanged(ZxObjBase*)));
    }
    iSubWndBaseAF::bindChartSignals(pWxPlot);
}

bool nmSubWndMain::runActionOf(QString sAction)
{
    if (iSubWnd::runActionOf(sAction)) {
        return true;
    }
    // 数据加载
    QString s = sAction;
    if (_isSame(s, "LoadP")) {
        return true;
    }
    return false;
}

bool nmSubWndMain::runCmdBy(QString sName, QString sID)
{
    QString s = sName;
    int nId = sID.toInt();
    switch (nId) {
        case 5301:
            return true;
        case 5302:
            this->geologicalMapImport();
            return true;
        case 5303:
            this->geologicalMapHide();
            return true;
        case 5304:
            this->drawPolygonOutline();
            return true;
        case 5305:
            this->drawSquareOutline();
            return true;
        case 5306:
            this->drawRoundOutline();
            return true;
        case 5307:
            this->drawFault();
            return true;
        case 5308:
            this->selectWell();
            return true;
        case 5309:
            this->drawWell();
            return true;
        case 5310:
            this->drawCrack();
            return true;
        case 5311:
            this->drawRegion();
            return true;
        case 5312:
            this->identificationRegion();
            return true;
//        case 5401:
//            this->generationMesh();
//            return true;
        case 5501:
            return true;
    }
    // 地质图导入
    if (sID.toInt() == 5302) {
        this->geologicalMapImport();
        return true;
    } else if (sID.toInt() == 5304) {
        return true;
    }
    if (_isSame(s, "RunGrid")) {
        if (NULL != m_pWxPlot) {
            //m_pWxPlot->refreshGrid(true);
        }
        return true;
    }
    return false;
}

bool nmSubWndMain::checkCmdEnable(bool &b, \
                                  QString sName, int nID, \
                                  bool bLicensed)
{
    bool b1 = (NULL != zxCurProject);
    bool b2 = (NULL != m_pDataWell);
    if (nID == 5102 || (nID >= 5301 && nID <= 5311) || nID == 5401 || nID == 5601) { //RunGrid
        b = (b1 && b2 && bLicensed && !isReadonly() && NULL != m_pWxPlot);
        return true;
    }
    return iSubWndBaseAF::checkCmdEnable(b, sName, nID, bLicensed);
}

void nmSubWndMain::reAdjustToolbar(QToolBar* pToolBar)
{
    iSubWndBaseAF::reAdjustToolbar(pToolBar);
    m_pPlotToolBar = pToolBar;
    // 获取所有动作的列表
//    QList<QAction *> actions = m_pPlotToolBar->actions();
//    // 隐藏第1个和第2个动作
//    if (actions.size() > 0) {
//        actions[0]->setVisible(false); // 隐藏第1个动作
//    }
//    if (actions.size() > 1) {
//        actions[1]->setVisible(false); // 隐藏第2个动作
//    }
}

void nmSubWndMain::firstLoadAndUpdate()
{
    iSubWndBaseAF::firstLoadAndUpdate();
}

void nmSubWndMain::finalDeals()
{
    iSubWndBaseAF::finalDeals();
#ifdef QT_DEBUG
    updatePlots();
    updateDockWxs();
    if (m_pWxDockData1 != NULL) {
        Q_ASSERT (NULL != m_pWxDockData1);
        m_pWxDockData1->raise();
    }
#endif
}

void nmSubWndMain::onActivated()
{
#ifdef QT_DEBUG
    // 当前窗体激活时，可以做些事情，比如把隐藏的Dock显示出来
    if (NULL != m_pWxDockTemp) {
        if (!m_pWxDockTemp->isVisible()) {
            m_pWxDockTemp->setVisible(true);
        }
    }
#endif
}

#ifdef QT_DEBUG

void nmSubWndMain::updatePlots()
{
    // 里面根据曲线，重新刷了一下坐标轴范围。你屏蔽该函数，即可
    // 坐标轴范围会变成背景图的大小
    return ;
    // 说明：以从当前井获取一条压力数据进行绘图为例
    QString sType = iDataModelType::sTypeDataGaugeP;
    QString sCodeP = ""; //如果已知压力数据Code，可以直接引用
    ZxDataGaugeP* pDataObjP = dynamic_cast<ZxDataGaugeP*>(getDataObjOf(sType, sCodeP));
    if (NULL == pDataObjP) {
        zxLogRunW(tr("Failed to get data of type '%1'").arg(sType));
        return;
    }
    VecFloat vecX, vecY;
    QByteArray ba = pDataObjP->getGaugeDataOf(0);
    if (!ZxBaHelper::convertBa2VecXY(vecX, vecY, ba)) {
        zxLogRunW(tr("Failed to get x-y data of dataobj '%1'").arg(pDataObjP->getCode()));
        return;
    }
    nmGuiPlot* pWxPlot = m_pWxPlot;
    Q_ASSERT (NULL != pWxPlot);
    QString sName = tr("CurveName");
    ZxObjBase* pObj = pWxPlot->updatePlotObjBy(sName, vecX, vecY, true);
    if (NULL != pObj) {
        pObj->setLockPos(true); //可以调整属性
        //        pObj->setReadOnly(true);
        pWxPlot->freshAxisScales(true);//刷新坐标轴刻度
        // 设置标题+坐标轴等
        pWxPlot->setAxisX(tr("Time"), "hr");
        pWxPlot->setAxisY(tr("Pressure"), "MPa");
        pWxPlot->setAxisXYLog(false, 0);
        pWxPlot->setAxisXYLog(false, 1);
        pWxPlot->m_pPlot->setLegendVisible(false);
        pWxPlot->m_pPlot->getTitle()->setName(tr("Demo"));
    }
}

ZxDataObject* nmSubWndMain::getDataObjOf(QString sType, QString sCode /*= ""*/)
{
    ZxDataWell* pDataWell = zxCurWell;
    Q_ASSERT (NULL != pDataWell);
    ZxDataObject* pDataObj = NULL;
    if (!sCode.isEmpty()) {
        pDataObj = pDataWell->getChild(sType, sCode);
    } else {
        ZxDataObjectList vecObjs = pDataWell->getChildren(sType);
        if (!vecObjs.isEmpty()) {
            pDataObj = vecObjs[0];
        }
    }
    return pDataObj;
}

void nmSubWndMain::updateDockWxs()
{
    // TODO，刷新Dock内容
    return;
    // 左侧参数窗体
    Q_ASSERT (NULL != m_pWxParas);
    QStringList listParas;
    listParas << "K" << "S" << "rw" << "Miuo" << "Bo" << "phi";
    m_pWxParas->refreshUIs(listParas);
    // 表格数据1
    Q_ASSERT (NULL != m_pTableView1);
    ZxTableModel* pTableModel = m_pTableView1->getModel();
    Q_ASSERT (NULL != pTableModel);
    QStringList listTitles;
    listTitles << tr("Col1") << tr("Col2\n(MPa)");
    VVecDouble vvec;
    {
        VecDouble vec;
        vec << 0.2 << 3.4;
        vvec << vec;
    }
    {
        VecDouble vec;
        vec << 5.6 << 0.456;
        vvec << vec;
    }
    pTableModel->setTitles(listTitles);
    pTableModel->setData(vvec);
    if (NULL != m_pListWxTemp) {
        m_pListWxTemp->clear();
        for (int i = 0; i < 10; i++) {
            QString sItem = tr("Demo Item %1").arg(i + 1);
            QListWidgetItem* pItem = new QListWidgetItem(sItem);
            Q_ASSERT (NULL != pItem);
            pItem->setIcon(zxLoadIcon("Open"));
            m_pListWxTemp->addItem(pItem);
        }
    }
}

void nmSubWndMain::updateTableByCurve(ZxObjCurve* pObjCurve, ZxTableView* pTableView)
{
    Q_ASSERT (NULL != pObjCurve);
    Q_ASSERT (NULL != pTableView);
    // 刷新表格标题
    {
        QString sNameX = pObjCurve->getAxisX()->getName();
        QString sUnit = pObjCurve->getAxisX()->getUnit();
        if (!sUnit.isEmpty()) {
            sNameX += QString("\n(%1)").arg(sUnit);
        }
        QString sNameY = pObjCurve->getAxisY()->getName();
        sUnit = pObjCurve->getAxisY()->getUnit();
        if (!sUnit.isEmpty()) {
            sNameY += QString("\n(%1)").arg(sUnit);
        }
        QStringList listTitles;
        listTitles << sNameX << sNameY;
        pTableView->getModel()->setTitles(listTitles);
    }
    // 刷新表格数据
    {
        VVecDouble vvec;
        QVector<QPointF> vecValues = pObjCurve->getAllValues();
        for (int i = 0; i < vecValues.count(); i++) {
            VecDouble vec;
            vec << vecValues.at(i).x() * 1.0;
            vec << vecValues.at(i).y() * 1.0;
            vvec << vec;
        }
        pTableView->getModel()->setData(vvec);
    }
}

#endif

void nmSubWndMain::slotObjSelChanged(ZxObjBase* p, bool b)
{
#ifdef QT_DEBUG
    // 如果选中了一条曲线，则把其数据显示在数据表格2中
    ZxObjCurve* pObjCurve = dynamic_cast<ZxObjCurve*>(p);
    if (NULL != pObjCurve && b) {
        Q_ASSERT (NULL != m_pWxDockData2);
        m_pWxDockData2->raise();
        updateTableByCurve(pObjCurve, m_pTableView2);
    }
#endif
}

void nmSubWndMain::slotObjPtsChanged(ZxObjBase* p)
{
}

void nmSubWndMain::onSerialize(ZxSerializer* ser)
{
    iSubWndBaseAF::onSerialize(ser);
    if (NULL != m_pWxPlot) {
        m_pWxPlot->setModified(false);
    }
}

void nmSubWndMain::onDeserialize(ZxSerializer* ser)
{
    iSubWndBaseAF::onDeserialize(ser);
    if (NULL != m_pWxPlot) {
        m_pWxPlot->setModified(false);
    }
}

void nmSubWndMain::onDeserialized()
{
    if (NULL != m_pWxPlot) {
        m_pWxPlot->resetAfterDeserialized();
    }
}

bool nmSubWndMain::loadRss()
{
    ZxRstJobWnd* pRstWnd = getRstJobWnd();
    Q_ASSERT (NULL != pRstWnd);
    // 基础信息
    {
        QByteArray v = pRstWnd->getDataInfo();
        IxSerDes* pSerObj = this;
        if (!loadRstInfoFromArr(v, pSerObj)) {
            return false;
        }
    }
    // 图形
    if (NULL != m_pWxPlot) {
        QByteArray v = pRstWnd->getDataInfo1();
        ZxPlot* pPlot = NULL;
        loadOnePlot(pPlot, v);
        if (NULL != pPlot) {
            m_pWxPlot->m_pPlotScene->freshToPlot(pPlot,
                                                 m_pWxPlot->m_pPlotView);
            m_pWxPlot->m_pPlot = m_pWxPlot->m_pPlotScene->m_pPlot;
            pPlot->resetTools(m_pWxPlot->m_pPlotView);
            m_pWxPlot->resetAfterDeserialized();
        }
        m_pWxPlot->runUpdate();
    }
    return true;
}

bool nmSubWndMain::saveRss()
{
    ZxRstJobWnd* pRstWnd = getRstJobWnd();
    if (NULL == pRstWnd) {
        return false;
    }
    // 基础信息
    {
        QByteArray v;
        IxSerDes* pSerObj = this;
        if (!saveRstInfoToArr(v, pSerObj)) {
            return false;
        }
        pRstWnd->setDataInfo(v);
    }
    // 图形
    if (NULL != m_pWxPlot) {
        ZxPlot* pPlot = m_pWxPlot->m_pPlot;
        {
            QByteArray v1;
            if (saveOnePlot(pPlot, v1)) {
                pRstWnd->setDataInfo1(v1);
            }
        }
    }
    return pRstWnd->save();
}

bool nmSubWndMain::slotSaveAll()
{
    ZxRstJobWnd* pRstWnd = getRstJobWnd();
    Q_ASSERT (NULL != pRstWnd);
    return saveRss();
}
void nmSubWndMain::setAnalyzeData(nmDataDemo *newAnalyzeData)
{
    m_pAnalyzeData = newAnalyzeData;
}

nmDataDemo *nmSubWndMain::analyzeData() const
{
    return m_pAnalyzeData;
}

// 地质图导入
void nmSubWndMain::geologicalMapImport()
{
    // 打开图片选择弹框
    // 打开文件对话框选择图片文件
    QString filePath = QFileDialog::getOpenFileName(nullptr, "选择图片文件", "", "Images (*.png *.xpm *.jpg)");
    if (!filePath.isEmpty()) {
        // 画布 设置背景，并自适应宽高
        ZxPlot* pPlot = m_pWxPlot->m_pPlot;
        pPlot->setBkImgFile(filePath);
//        QImage* pBkImg = pPlot->getBkImg();
//        Q_ASSERT (NULL != pBkImg);
//        int w = pBkImg->width();
//        int h = pBkImg->height();
//        pPlot->getMainAxisX()->setRangeMinMax(0, w, true);
//        pPlot->getMainAxisY()->setRangeMinMax(0, h, true);
        nmDataLogFile::getInstance()->writeLog(filePath);
    }
}

void nmSubWndMain::geologicalMapHide()
{
}

void nmSubWndMain::setTopDocksVisible(bool visible)
{
    // 获取主程序所有 Dock 视图
    QList<QDockWidget*> dockWidgets = m_pMainWindow->findChildren<QDockWidget*>();
    // 遍历所有 Dock 视图并移除位于左侧的
    foreach (QDockWidget* dock, dockWidgets) {
        if (visible) {
            dock->show();
        } else {
            dock->hide();
        }
    }
}

void nmSubWndMain::drawPolygonOutline()
{
    // 获取多边形边界的绘制，并模拟触发点击操作
    // 目前多边形边界绘制是工具栏的第4个，所以用 3
//    QList<QAction *> actions = m_pPlotToolBar->actions();
//    if (!actions.isEmpty()) {
//        QAction *action = actions[3];
//        action->trigger();
//    }
    this->triggerToolBarAction(NOT_PolygonOutline);
}

void nmSubWndMain::drawSquareOutline()
{
}

void nmSubWndMain::drawRoundOutline()
{
}

void nmSubWndMain::drawFault()
{
    this->triggerToolBarAction(NOT_Line_Fault);
}

void nmSubWndMain::selectWell()
{
    // TODO，从结构树中找到所有的井，供用户选择一个
    // TODO，先找到所有的井
    int wellCount = zxCurProject->getChildrenCount(iDataModelType::sTypeWell);
    ZxDataObjectList wellList = zxCurProject->getChildren(iDataModelType::sTypeWell);
    nmDataLogFile::getInstance()->writeLog(QString(" %1 %2").arg(wellCount).arg(wellList.size()));
    QStringList wellNames;
    QList<QVariant> wellCodes;
    for (int i = 0; i < wellList.size(); i++) {
        ZxDataObject* wellObj = wellList[i];
        nmDataLogFile::getInstance()->writeLog(wellObj->getName() + " " + wellObj->getCode());
        wellNames.append(wellObj->getName());
        wellCodes.append(wellObj->getCode());
    }
    nmWxSelectWellsDlg* dlg = new nmWxSelectWellsDlg(this);
    nmWxSelectWellsWidget *wellListWidget = new nmWxSelectWellsWidget(this);
    wellListWidget->addItems(wellNames, wellCodes);
    dlg->setWidget(wellListWidget);
    if(dlg->exec() == QDialog::Accepted) {
        // 用户点击了“确定”按钮
        nmDataLogFile::getInstance()->writeLog(" OK ");
    } else {
        // 用户点击了“取消”按钮
        nmDataLogFile::getInstance()->writeLog(" Cancel ");
    }
}

void nmSubWndMain::drawWell()
{
    // 获取多边形边界的绘制，并模拟触发点击操作
    // 目前多边形边界绘制是工具栏的第4个，所以用 3
//    QList<QAction *> actions = m_pPlotToolBar->actions();
//    if (!actions.isEmpty()) {
//        QAction *action = actions[0];
//        action->trigger();
//    }
    this->triggerToolBarAction(NOT_Point_Well);
    nmDataLogFile::getInstance()->writeLog(" in drawWell ");
}

void nmSubWndMain::drawCrack()
{
    this->triggerToolBarAction(NOT_Line_Crack);
}

void nmSubWndMain::drawRegion()
{
}

void nmSubWndMain::identificationRegion()
{
}

void nmSubWndMain::generationMesh()
{
    // TODO 拿到多边形和点的位置信息
    QVector<ZxObjBase*> pObjVec = m_pWxPlot->getObjsByTag("nObjPolygonOutline");
    nmDataLogFile::getInstance()->writeLog(" ---------- " + QString::number(pObjVec.count()));
    QVector<ZxObjBase*> pWellObjVec = m_pWxPlot->getObjsByTag("nObjPointWell");
    nmDataLogFile::getInstance()->writeLog(" ---------- " + QString::number(pWellObjVec.count()));
//    return;
    // 生成geo文件
    // 调用gmsh生成vtk文件
    // 弹出网格的dialog，渲染文件
    if (true) {
        QDialog* dlg = new QDialog;
        QVBoxLayout* layout = new QVBoxLayout;
        dlg->setLayout(layout);
        nmWxGridVTKContainerWidget* gridVTKContainerWidget = new nmWxGridVTKContainerWidget(dlg);
        layout->addWidget(gridVTKContainerWidget);
        dlg->resize(800, 600);
        dlg->show();
    }
//    nmWxGridWindow* gridWindow = new nmWxGridWindow(NULL);
////    gridWindow->resize(1200, 800);
////    gridWindow->show();
//    gridWindow->initialize();
    //    gridWindow->render();
}

void nmSubWndMain::triggerToolBarAction(int index)
{
    // 获取多边形边界的绘制，并模拟触发点击操作
    // 目前多边形边界绘制是工具栏的第4个，所以用 3
    QList<QAction *> actions = m_pPlotToolBar->actions();
    if (!actions.isEmpty() && index >= 0 && index < actions.count()) {
        QAction *action = actions[index];
        action->trigger();
    }
}

bool nmSubWndMain::onConfirmClosing()
{
    return iSubWndBaseAF::onConfirmClosing();
}