#include <QPainter>

//#include <QDialog.h>
#include <ZxSerializer.h>
#include "IxPtyPano.h"

#include "ZxSubAxisX.h"
#include "ZxSubAxisY.h"

#include "ZxPlot.h"
#include "ZxObjText.h"

#include "nmObjPointWellTool.h"
#include "nmObjPointWell.h"

#include "nmDataLogFile.h"

#include "iWxWellNew.h"
#include "ZxBaseUtil.h"
#include "ZxDataProject.h"
#include "TreeWxMain.h"

#include "Defines.h"
#include "zxSysUtils.h"

#include "iDataTypes.h"

#include "nmSingalCenter.h"

ZX_DEFINE_DYNAMIC(nObjPointWell, nmObjPointWell)

nmObjPointWell::nmObjPointWell()
{
    m_bSelectWell = false;
    init("", NULL, NULL);
}

nmObjPointWell::nmObjPointWell(const QString& sName, \
                               ZxSubAxisX* pAxisX, \
                               ZxSubAxisY* pAxisY)
    : nmObjPoint(sName, pAxisX, pAxisY)
{
    m_bSelectWell = false;
    init(sName, pAxisX, pAxisY);
}

//nmObjPointWell::nmObjPointWell(const QString& sName, \
//                               ZxSubAxisX* pAxisX, \
//                               ZxSubAxisY* pAxisY, \
//                               bool selectWell)
//    : nmObjPoint(sName, pAxisX, pAxisY)
//{
//    m_bSelectWell = selectWell;
//    init(sName, pAxisX, pAxisY);
//}

nmObjPointWell::~nmObjPointWell()
{
}

void nmObjPointWell::init(const QString& sName, \
                          ZxSubAxisX* pAxisX, \
                          ZxSubAxisY* pAxisY)
{
    m_sObjTag = "nObjPointWell";
    nmObjBase::init(sName, pAxisX, pAxisY);
    initFlags();
    m_oDot = ZxDot(DTS_DownTriangle, QColor(255, 0, 0, 125), 1.f, true);
    m_sDesc = "";
    m_bShowSubObjs = true;
    m_oDot = ZxDot(DTS_Circle, QColor(0, 255, 0), 1.5f, true);
    m_clrFillUnvalid = QColor(0, 255, 255);
    m_clrOuter = QColor(255, 0, 0);
    m_vecPoints << QPointF(0.f, 0.f);
    loadTempl();
}

void nmObjPointWell::initTools()
{
    m_pTool = new nmObjPointWellTool();
    nmObjBase::initTools();
}

bool nmObjPointWell::runMove(const QPointF &pt1, const QPointF &pt2)
{
    nmObjPoint::runMove(pt1, pt2);
    // 更新井的位置信息
    if (m_pWellData) {
        m_pWellData->setLocationX(pt2.x());
        m_pWellData->setLocationY(pt2.y());
    }
    return true;
}

void nmObjPointWell::initFlags()
{
    // TODO，如果是选择的井，则位置和大小都不能动，设置为true
    setLockPos(false);
    setLockSize(false);
    setReadOnly(false);
}

void nmObjPointWell::initSubObjs()
{
//    nmObjPoint::initSubObjs();
    ZxPlot* pPlot = dynamic_cast<ZxPlot*>(this->getParent());
    if (NULL != pPlot) {
        QString sName = "";
        ZxObjBase* p = pPlot->addOneObj(POT_Text, sName, false, \
                                        m_pAxisX, m_pAxisY);
        appendSubObjs(p);
        ZxObjText* pBoundText = dynamic_cast<ZxObjText*>(p);
        Q_ASSERT (NULL != pBoundText);
        pBoundText->setFrameVisible(false);
        QColor clr = QColor(255, 255, 255, 64);
        pBoundText->setBackgroundColor(clr);
        pBoundText->setReadOnly(true);
        int n = Qt::AlignHCenter | Qt::AlignVCenter;
        pBoundText->setAlignFlag(n);
        pBoundText->setFont(QFont("Times", 8));
        pBoundText->deselect(true);
        pBoundText->deselectOthers();
        pBoundText->setText(tr("PointWell"));
    }
}

void nmObjPointWell::setPointTag(QString s)
{
    nmObjPoint::setPointTag(s);
}

void nmObjPointWell::update()
{
    nmObjBase::update();
}

void nmObjPointWell::onSerialize(ZxSerializer* ser)
{
    nmObjBase::onSerialize(ser);
    ser->write("NMWellID", m_sWellID);
}

void nmObjPointWell::onDeserialize(ZxSerializer* ser)
{
    nmObjBase::onDeserialize(ser);
    ser->read("NMWellID", m_sWellID);
    // 根据wellID获取井的信息
    m_pWellData = (ZxDataWell*)zxCurProject->getChild(iDataModelType::sTypeWell, m_sWellID);
    if (m_pWellData) {
        // 设置图元的位置信息，将井的坐标设置为plot对象的坐标
        m_vecPoints.clear();
        m_vecPoints << QPointF(m_pWellData->getLocationX(), m_pWellData->getLocationY());
        return;
    }
    // TODO，如果井数据不存在，则其实就是新建井了
}

void nmObjPointWell::onSaveTempl(ZxSerializer* ser)
{
    nmObjBase::onSaveTempl(ser);
    ser->write("NMWellID", m_sWellID);
}

void nmObjPointWell::onLoadTempl(ZxSerializer* ser)
{
    nmObjBase::onLoadTempl(ser);
    ser->read("NMWellID", m_sWellID);
    // 根据wellID获取井的信息
    m_pWellData = (ZxDataWell*)zxCurProject->getChild(iDataModelType::sTypeWell, m_sWellID);
    if (m_pWellData) {
        // 设置图元的位置信息，将井的坐标设置为plot对象的坐标
        m_vecPoints.clear();
        m_vecPoints << QPointF(m_pWellData->getLocationX(), m_pWellData->getLocationY());
        return;
    }
    // TODO，如果井数据不存在，则其实就是新建井了
}

void nmObjPointWell::afterCreated()
{
    this->createWell();
}

void nmObjPointWell::createWell()
{
    // 弹出井属性的设置dialog
    iWxWellNew* pWellDialog = new iWxWellNew();
    ZxDataWell* pWellData = new ZxDataWell();
    // 设置图元的坐标
    pWellData->setLocationX(m_vecPoints[0].x());
    pWellData->setLocationY(m_vecPoints[0].y());
    // 生成code
    QString sCode = pWellData->getDefaultCode(zxCurProject);
    pWellData->setCode(sCode);
    // 添加到整体结构树上
    zxCurProject->appendChild(pWellData);
    Q_ASSERT (NULL != pWellDialog);
    // dialog框展示井数据并支持编辑
    pWellDialog->setDataWell(dynamic_cast<ZxDataWell*>(pWellData));
    pWellDialog->setActionMode(iWxWellNew::AM_Edit);
    // 初始化UI
    pWellDialog->initUI();
    // 图元保存井数据
    m_sWellID = pWellData->getCode();
    m_pWellData = pWellData;
    // 模态展示
    if (pWellDialog->exec() == QDialog::Rejected) {
        // TODO，如果是 选择的井，则直接删除画布上的图元
        // TODO，如果是 新建的井，删除图元 + 井数据！
        nmSingalCenter::getInstance()->emitSigDeleteWell(sCode);
    } else {
        // 将数据做转换，然后移动到指定的位置
        QVector<QPointF> vecPoss;
        vecPoss << QPointF(m_pWellData->getLocationX(), m_pWellData->getLocationY());
        nmDataLogFile::getInstance()->writeLog(" =========== " + QString::number(vecPoss[0].x()) + " " + QString::number(vecPoss[0].y())  );
        // 将数据做转换，然后移动到指定的位置
        this->setAllPos(vecPoss);
        moveToPos(this->getPosOf(this->getAllPos()));
    }
    delete pWellDialog;
}

void nmObjPointWell::editWell()
{
    ZxDataWell* pWellData = m_pWellData;
    // 弹出井属性的设置dialog
    iWxWellNew* pWellDialog = new iWxWellNew();
    Q_ASSERT (NULL != pWellDialog);
    // dialog框展示井数据并支持编辑
    pWellDialog->setDataWell(dynamic_cast<ZxDataWell*>(pWellData));
    pWellDialog->setActionMode(iWxWellNew::AM_Edit);
    // 初始化UI
    pWellDialog->initUI();
    // 模态展示
    if (pWellDialog->exec() == QDialog::Accepted) {
        // 根据新坐标进行移动
        QVector<QPointF> vecPoss;
        vecPoss << QPointF(m_pWellData->getLocationX(), m_pWellData->getLocationY());
        nmDataLogFile::getInstance()->writeLog(" =========== " + QString::number(vecPoss[0].x()) + " " + QString::number(vecPoss[0].y())  );
        // 将数据做转换，然后移动到指定的位置
        this->setAllPos(vecPoss);
        moveToPos(this->getPosOf(this->getAllPos()));
    }
    delete pWellDialog;
}

QVector<double> nmObjPointWell::getWellInformation()
{
    QVector<double> wellInformation;
    if (m_pWellData) {
        wellInformation.append(m_pWellData->getLocationX());
        wellInformation.append(m_pWellData->getLocationY());
        wellInformation.append(m_pWellData->getWellRadius());
    }
    return wellInformation;
}

ZxDataWell *nmObjPointWell::getWellData() const
{
    return m_pWellData;
}

const QString &nmObjPointWell::getWellID() const
{
    return m_sWellID;
}